The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #1 Lobaugh MKT Auto Car

Postby Dennis Holler » Wed Feb 02, 2022 9:41 am

Thanks Jim,
So is my car a litho job or hand lettered? I guess I forgot to consider if it could have been a postwar version. I should point out my car did not include all the brake rigging detail but I am not sure if that points to anything or not at this point. I'll pull my box of Lobaugh cars back out and take a closer look lol,

Interestingly, in zooming in on a couple of my R40-10 pictures, I think I see the letters Faber in the lower right corner. I will go take a closer look and trya nd get a legible photo of those... Kind of interesting. I think I at least one each of the R40-10's with the Lobaugh SF and the FABER lettering.
Doorstop Rookie

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #1 Lobaugh MKT Auto Car

Postby Dennis Holler » Wed Feb 02, 2022 11:32 am

Now, here it gets real interesting. The first two "Lobaugh" cars I got were a couple of Yellow R40-10 PFE reefers. A couple of years ago I got a few more cars. The Faber thing got me curous and so looking more closely, I see the Yellow cars are marked Faber and the darker Orange-ish car and the ART are marked Lobaugh SF. Maybe the Faber cars were a different color thant he Lobaugh cars might make sense.

Image

You can see the color difference very clearly here. Also note the pin holes are in different locations and there are more on the Lobaugh version. Also note the difference in shield size and frankly the lettering is actually different between the cars. Note the hand grabs are in different locations because the sides were punched differently. And finally, it's hard to see but the bottom side skirt is cut differently on both cars.
Image

Lobaugh Orange car
Image
and the Faber version
Image
Doorstop Rookie

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #1 Lobaugh MKT Auto Car

Postby Rufus T. Firefly » Wed Feb 02, 2022 1:05 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:07 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #1 Lobaugh MKT Auto Car

Postby Dennis Holler » Wed Feb 02, 2022 1:54 pm

The base of the side is still there, itis hard to see in that photo, they are painted black. That said, the cur on them is definitely different than the Lobaugh side. I think all the ones with Faber on them that I have are cut the same... But that difference fits in with the difference in the hole punching pattern and the lack of the door hooks on the Faber sides...
Doorstop Rookie

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby R.K. Maroon » Wed Feb 02, 2022 11:27 pm

# 2 -- Lobaugh UP Automobile Box Car

Here is an example of a pre-war car that is lettered with decals:

Image
Image

Hmm...I should get this guy into the light tent for some better photos. I might try the Futura treatment on this one first though -- I little finish restoration might go a long way here.

With the presence of decals, one can reasonably conclude that this car was sold as a kit. Yes, there is some chance that it was a factory-build and that somebody stripped off the original hand-lettering to apply decals. I would not bet that way, though I have seen this once (on a Lenoir!).

Jim
The link below any photo will display the image full size

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby sarge » Thu Feb 03, 2022 5:49 am

R.K. Maroon wrote:# 2 -- Lobaugh UP Automobile Box Car
Yes, there is some chance that it was a factory-build and that somebody stripped off the original hand-lettering to apply decals. I would not bet that way, though I have seen this once (on a Lenoir!).
Jim


Brings that same point up again; a bit of today's notions judging yesterday's artefacts. We value and marvel at hand lettering today, but did the previous generations back when it was much more mainstream? I can hear the conversation in the hobbyshop now:

"I need an automobile box for my pike, but all you have are Katy."

"Yeah, I know. Can't shift 'em. If you want, buy one of the Katy's and I'll throw in a pack of decals. Your choice."

"Done."

I can't wrap my head around the idea that folks marvelled at hand lettered cars back then any more than we marvel at the quality of Chinese screen-print lettering now. One day folks might appreciate the latter as some sort of art though.

BTW, if that Lenoir was an NYC Consol decal'd for Boston & Albany, that would be me. The loco came to me in poor shape, lettering and paint destroyed on one side so I repaired and refinished it. Mike Hill bought it from me for his collection.

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby Dennis Holler » Thu Feb 03, 2022 8:29 am

Funny you should mention Bill Lenoir painting over factory built cars. Here is a tank car that it looks like he painted over the wrapper on unless he primed Black under the Silver.. You can see the Black under the band that has come loose.
Image
Here is a close up, looks like you can see some White lettering there two.
Image

And the Lenoir Signature..

Image

Interesting tank car too btw. It has a diecast frame and I don't remember any of the major kit mfrs offering this style of tank car but there were so many.
Doorstop Rookie

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby R.K. Maroon » Thu Feb 03, 2022 10:58 pm

Sarge, I believe a modeler in San Antonio know owns that Lenoir model. He described it to me at the local train show but I did not see it. The model I was referring to is a CGW Pacific. The tender sports a decal of the CGW herald, and you can see the original hand-lettered herald under the paint that was sprayed before the decal was applied.

Dennis, Alexander sold a tank car with a wrapper and a cast frame. One of these is in fact #6 on my list of models to post.

Here is the underside of the UP auto car:

Image

As with the MKT car, this is in "all-original" condition.
Jim
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby ScaleCraft » Fri Feb 04, 2022 12:09 am

R.K. Maroon wrote:
Here is the underside of the UP auto car:

Image

As with the MKT car, this is in "all-original" condition.
Jim



Holy Bat Poop...those are Tennite wheels on the right truck!
Want some more?
Dave....gone by invitation

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby Dennis Holler » Fri Feb 04, 2022 10:39 am

Not me, I have couple of piles of old tenite wheels, both Black and Grey and both scale and tinplate flanges....I'm trying to align trucks and wheels to the cars I have, ie: matching what would have been the right mfr's trucks on a given car.... with exceptions of course.. probably a losing battle at best.

On the tank, it's not Alexander, I know what you mean on those though, have a couple ofr comparison, I'll have to try and get some more clear pictures of the Lenoir Texaco car, It is the ACG 103 style frame with what I call the higher than normal walkways. I am wondering if Lenoir did a tank car of his own for either Scale model railways or just his own builds.. I don't have a SMR catalog, but do have the later Megow catalog showing at least some of owhat was in the AMR offerings. BTW this thing isn't 17/64ths either, it is 1/4" size in width and stuff. I'll take a closer look and trya nd get some photos to better show those details.
Doorstop Rookie

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby bob turner » Fri Feb 04, 2022 2:06 pm

My Tenite wheels got filed a half-century ago - first on the flanges, then in the circular file. I no longer even put up with brass wheels. A few of my models still have Zamac, but boy, do they pick up dirt.
I have a box of plastic Athearn that may get eBayed - but now I have to prove capital gains/losses, and not sure how to do that. Maybe the basis can be list price?

So here is a doorstop car that I find delightful - stole it from my post in the OGR thread.

Image

By the way, all you do is right click your image on OGR (not somebody else's; that is a copyright infringement), click the "copy image address" from the resulting list, and post here by clicking first "Img" which is nine boxes from the left above each post, and then type "paste" - on my computer, that is a "control V."

Easier than Shutterfly, but not by much.

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby Dennis Holler » Fri Feb 04, 2022 4:35 pm

Aren't the ribbed back wheels on Auel trucks zamac?
Doorstop Rookie

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby sarge » Fri Feb 04, 2022 5:07 pm

Yep. They are same material as the sideframes and bolsters.

Back to that tank car, that car I believe was Bill's own. I think its the one front and centre in this shot of Bill's layout:

Image

It was a bit smoother then.

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby Dennis Holler » Fri Feb 04, 2022 5:24 pm

It's definitely come a bit unraveled over the years since if that is indeed it in your picture. Very cool if it was. Would be nice if there were some tricks to try and tighten the wrap up a bit, but I don't want to destroy what's left. I can reattach the bands pretty easily. Thanks for posting that picture Sarge.
Doorstop Rookie

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #2 Lobaugh UP Auto Car

Postby R.K. Maroon » Fri Feb 04, 2022 9:38 pm

Nice Alexander drop gon, Bob. Listed as a Rock Island prototype in the catalog.

Here is the UP auto car as listed in the 1941 catalog:

Image

As I recall, the splotch on the photo appears in all copies of the 1941 catalog that I have seen, but I wouldn't bet a paycheck on it.

This was in the inaugural class of Lobaugh auto box cars in 1936 and offered up to the start of the war. Off the top of my head, it is the only outside-braced auto car that Lobaugh offered. I would need to check my notes and do a bit of research to firm that up or otherwise disprove it.

Jim
The link below any photo will display the image full size


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 71 guests