Just another attempt to keep the conversation going
Re: Just another attempt to keep the conversation going
Second Dan's comments, really nice job. Dang I wish I had picked one of these; I've seen them occasionally but always had passed them over having struggled with like metal Gloor Craft kits in the past, that was then though and you clearly have it down. Excellent.
btw anyone out else there thinking "...how would one actually power one of these little dudes?"
Pete
btw anyone out else there thinking "...how would one actually power one of these little dudes?"
Pete
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Just another attempt to keep the conversation going
De Bruin wrote:Second Dan's comments, really nice job. Dang I wish I had picked one of these; I've seen them occasionally but always had passed them over having struggled with like metal Gloor Craft kits in the past, that was then though and you clearly have it down. Excellent.
btw anyone out else there thinking "...how would one actually power one of these little dudes?"
Pete
Rubber band...or a bottle rocket.
Dave....gone by invitation
Re: Just another attempt to keep the conversation going
Thanks Guys...I enjoy the tiny aspect of such equipment, but building this one, which is all relatively soft pewter, was a test of my patience. The whole model has a "crushability factor" which prevents one from really handling it the way we are accustom which our O scale stuff. The directions are somewhat reliant on the one undersized diagram they supplied. I studied that document endlessly in pursuit of getting it correct...and still didn't entirely. Oh well it's done, and makes for an interesting scenic item.
Bob
Bob
- Rufus T. Firefly
- Posts: 42227
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Just another attempt to keep the conversation going
Robert wrote:Thanks Guys...I enjoy the tiny aspect of such equipment, but building this one, which is all relatively soft pewter, was a test of my patience.
Looks good!
Ever build one of Wiseman's Velocipede kits?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Just another attempt to keep the conversation going
Rufus T. Firefly wrote:Robert wrote:Thanks Guys...I enjoy the tiny aspect of such equipment, but building this one, which is all relatively soft pewter, was a test of my patience.
Looks good!
Ever build one of Wiseman's Velocipede kits?
No I haven't. I did see that Wiseman is offering this speeder kit though. He is saying it's same as the Period Miniatures kit.
- Rufus T. Firefly
- Posts: 42227
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Just another attempt to keep the conversation going
Robert wrote:Rufus T. Firefly wrote:Robert wrote:Thanks Guys...I enjoy the tiny aspect of such equipment, but building this one, which is all relatively soft pewter, was a test of my patience.
Looks good!
Ever build one of Wiseman's Velocipede kits?
No I haven't. I did see that Wiseman is offering this speeder kit though. He is saying it's same as the Period Miniatures kit.
Probably is -- he's made a business of assembling a host of predecessor businesses under his tent,
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Just another attempt to keep the conversation going
Rufus T. Firefly wrote:Robert wrote:Rufus T. Firefly wrote:
Looks good!
Ever build one of Wiseman's Velocipede kits?
No I haven't. I did see that Wiseman is offering this speeder kit though. He is saying it's same as the Period Miniatures kit.
Probably is -- he's made a business of assembling a host of predecessor businesses under his tent,
Everybody's got a piece of the pie it seems. Not me though, I even had to park out back at the Nationals event...
Re: Just another attempt to keep the conversation going
De Bruin wrote:btw anyone out else there thinking "...how would one actually power one of these little dudes?" Pete
PSC made an ON3 Model T inspection car which had a (as best I can recall) Mitsubishi (sp?) motor. It is even smaller than the speeder. There is also the RY models version of the speeder, which comes up on the Bay now and again, and might be a better buy than the pewter kit durability wise. Not sure what motor was used, but it is located in the trailer (as I assume it is with the pewter kit).
Rich
Re: Just another attempt to keep the conversation going
E7 wrote:De Bruin wrote:btw anyone out else there thinking "...how would one actually power one of these little dudes?" Pete
PSC made an ON3 Model T inspection car which had a (as best I can recall) Mitsubishi (sp?) motor. It is even smaller than the speeder. There is also the RY models version of the speeder, which comes up on the Bay now and again, and might be a better buy than the pewter kit durability wise. Not sure what motor was used, but it is located in the trailer (as I assume it is with the pewter kit).
Rich
The motor is located in the Speeder. There nothing but a frame under the trailer. Once built it's durability becomes irrelevant since it becomes a scenic accent at best. Accept it for the tiny beauty it is, or better yet go build one to really appreciate it...
Robert
Re: Just another attempt to keep the conversation going
OK, lets wander off in conversation to all sorts of white metal, just for fun.
In my world, we do lots of white metal. Many modern kits use brass etch and white metal castings rather than lost wax in 7mm.
This is a completely white metal Fowler diesel-mechanical kit. The nice thing, of course, is the mass. It's a heavy little bugger so quite reliable in pickup and a smooth runner.
Assembly is really straightfoward. A soldering iron on a Variac, some commercial low temp (70 degree C or 100 degree C) solder or Cerrobend, dilute phosporic acid for flux, and a little practice gives a very solid structure and a clean assembly.
Of course, now that I built this little beggar, someone imported a Chinese made RTR version; plastic, nice slowspeed drive (they actually can do a nice drive when someone asks!), but oh, so light in comparison...
In my world, we do lots of white metal. Many modern kits use brass etch and white metal castings rather than lost wax in 7mm.
This is a completely white metal Fowler diesel-mechanical kit. The nice thing, of course, is the mass. It's a heavy little bugger so quite reliable in pickup and a smooth runner.
Assembly is really straightfoward. A soldering iron on a Variac, some commercial low temp (70 degree C or 100 degree C) solder or Cerrobend, dilute phosporic acid for flux, and a little practice gives a very solid structure and a clean assembly.
Of course, now that I built this little beggar, someone imported a Chinese made RTR version; plastic, nice slowspeed drive (they actually can do a nice drive when someone asks!), but oh, so light in comparison...
- rex desilets
- Posts: 1786
- Joined: Sun Jul 15, 2007 2:18 pm
Re: Just another attempt to keep the conversation going
"A soldering iron on a Variac, some commercial low temp (70 degree C or 100 degree C) solder or Cerrobend, dilute phosporic acid for flux"
It's a brilliant solution for whitemetal models. Picked up on it years ago during my OO British outline period. The secret is to keep the phosphoric acid flux bubbling whilst you solder and the little bits won't melt on you.
It's a brilliant solution for whitemetal models. Picked up on it years ago during my OO British outline period. The secret is to keep the phosphoric acid flux bubbling whilst you solder and the little bits won't melt on you.
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams
Re: Just another attempt to keep the conversation going
That's a handsome machine Sarge. Not sure I'd have been able to solder my Speeder though.
Robert
Robert
Re: Just another attempt to keep the conversation going
Robert wrote:The motor is located in the Speeder. There nothing but a frame under the trailer. Once built it's durability becomes irrelevant since it becomes a scenic accent at best. Accept it for the tiny beauty it is, or better yet go build one to really appreciate it...Robert
Wow! Doesn't look like there is enough space to put anything there. The motor on the RY model is inside the box on the trailer, so seeing your model, also with the trailer and box, I guessed it was done the same as the RY version. I hope to go RC battery, so anything that small is pretty much a no go, unless I have it pulling a boxcar!
Rich
Re: Just another attempt to keep the conversation going
Rich the box on the trailer as well as the two switch lanterns are to suggest this speeder is head out to do some maintenance along the right of way.
The box is called a battery basement according to the tag on the packet it came in...a train show find.
Robert
The box is called a battery basement according to the tag on the packet it came in...a train show find.
Robert
Re: Just another attempt to keep the conversation going
Robert wrote:...a train show find. Robert
Always great fun to go to shows!
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 55 guests
