Page 1 of 2

Passenger Cars

Posted: Sun Apr 09, 2017 2:12 pm
by bob turner
I was just "sharpening up" my images and noted that I have some shots of Pomona Valley cars. I will present them here, and then go on to bore you with Exacta, some Kasiner, my oft-repeated Walthers, and maybe some others. Great fun - so here's a couple, and I am off to the airport:

miller ebay 003.jpg
miller ebay 003.jpg (543.66 KiB) Viewed 7983 times


miller JC RPO.jpg
miller JC RPO.jpg (585.55 KiB) Viewed 7983 times

Re: Passenger Cars

Posted: Sun Apr 09, 2017 2:15 pm
by bob turner
And Centholm - who can forget this name?

Might be Pomona, might be JC. Not an expert.

La Belle 003.jpg
La Belle 003.jpg (675.45 KiB) Viewed 7981 times

Re: Passenger Cars

Posted: Sun Apr 09, 2017 3:58 pm
by Seaboard Air Line Fan
All 4 look sharp Bob!!!

Timely, this just reminded me I forgot to put handrails on the Walthers coach I've been posting about. I'm still waiting on decals from Jack McGarry so I have time.

Are the Pomona cars aluminum? What brand trucks did you use?

When I started in O scale I told myself I wouldn't do passenger cars...18 cars later I think it's safe to say I've changed my mind. If GGD ever comes thru on the Silver Meteor that'll add at least 7 cars to the herd. I think my plans to enlarge my layout are only to give the passenger trains a chance to stretch their legs :lol:

Can't wait to see the others.

Re: Passenger Cars

Posted: Sun Apr 09, 2017 9:43 pm
by De Bruin
Nice cars indeed Mr Turner, The Pomona Valley's are intriguing, I've only seen one or two of your extruded examples float by on da'bay and I didn't get them.
I assume the fluted roof is a metal wrapper over wood? To answer Bob D's question I believe these are actually spot-welded sheet steel with wood floors and roofs.
They're 17/64's and noticeably larger than BC-M's, Walthers or other manufacturers of similar PS plans. I have two PV's but they're based on pre-war PS cars,
Image
Here's a 4-4-2 car body sporting a zync-cromate coat as these rust easily, they have a strange hardware store quality to them. Note the nifty little upper windows, the BC-Models version of this plan has them too, but the Walthers version does not.
Image
Here's a 12-5 duplex I did around 2011 (I know I posted both of these here before the great purge when I didn't know what manufacturer they were,
the 4-4-2 will get finished to go with it. I'm always interested in Pomona Valley models and wonder if anyone has one of the two unit Denver Zephyr
locomotive sets they catalogued in 1940. That would be interesting to see.

Re: Passenger Cars

Posted: Sun Apr 09, 2017 9:44 pm
by rogruth
Impressive as always, Bob.
Will bewatching for more.

Re: Passenger Cars

Posted: Sun Apr 09, 2017 10:07 pm
by bob turner
Hopefully more folks will join Pete and post some cars. I believe the corrugated cars are monel metal. The heavyweights went to Allan Wehrle. That is how I met him. Not sure where the corrugated cars went. I'll put some more here later.

Re: Passenger Cars

Posted: Sun Apr 09, 2017 11:29 pm
by De Bruin
Bob, I have a scan of the 1940 PV catalog and your "Centholm" is actually pictured on Page 21 in the Pullman Cars section lettered "San Juan" or something like that(blurry) I guess a sleeper lounge? An example of your AT&SF coaches is in there too.

Re: Passenger Cars

Posted: Mon Apr 10, 2017 1:33 am
by bob turner
That is neat info - Allan had said they were PV.

Here are a few more - first, a re-run of the Exacta. I shortened it quite a bit, since the Harrimans were generally not 90 feet long. I used Walthers roof and ends.

Baggage Cars 002.jpg
Baggage Cars 002.jpg (1.8 MiB) Viewed 7897 times


Here is one I did in the mid 1950s, and stole a pair of Egolf trucks off a card stock car that went to Dan Henon. I got the car itself in a sale in Philadelphia of a bunch of Egolf and Icken stuff. $350 for an Icken M1 was too much for me - took me a month to make that much.

Baggage Cars 008.jpg
Baggage Cars 008.jpg (745.2 KiB) Viewed 7897 times


Here is a Walthers car - it has a removable roof. It came from OSW some years back, painted Daylight. Note how the roof fails to perfectly mate:

boiler 003.jpg
boiler 003.jpg (426.85 KiB) Viewed 7897 times


That's enough for today.

Re: Passenger Cars

Posted: Mon Apr 10, 2017 12:46 pm
by Carey Williams
Hello Bob

Thank you for posting the photos of the "vintage" passenger cars, great education . Cheers Carey

Re: Passenger Cars

Posted: Mon Apr 10, 2017 11:43 pm
by Erik C Lindgren
Oh Bob I want those Santa Fe cars. SWEEEEETTTTT

Re: Passenger Cars

Posted: Thu Apr 13, 2017 1:54 am
by Carey Williams
Hello all passenger car admirers

Recently going through Model Railroading 1947 .. lots of fun stuff. Joe Fischer regularly had an ad for his custom cars ...wow they were expensive big time ! 35.00 up for a nice car up to 80+ for interior and lights .

At the March meet there were a number of lovely Fischer cars available ..I had no idea his production went back so far .

How long was Joe Fischer building cars ? Joe must have built up a faithful wealthy group of "wide-awake" clients to keep him building passenger cars for many years.
Does anyone have Joe's price list or flyer ?
Cheers Carey

Re: Passenger Cars

Posted: Thu Apr 13, 2017 9:35 pm
by HHS
IMG_0194 (1280x440).jpg
IMG_0194 (1280x440).jpg (225.99 KiB) Viewed 7670 times

These coaches and baggage where built by the late Bill Russel of Fort Washington, PA. in the late 1960's.
Hugh

Re: Passenger Cars

Posted: Thu Apr 13, 2017 9:37 pm
by bob turner
And hand lettering! George Stock?

Very nice. Makes me want to resume work on my Camel Consolidation!

Re: Passenger Cars

Posted: Thu Apr 13, 2017 10:14 pm
by bob turner
Here are some Walthers cars. Shasta was built by person unknown, and has a full interior.

boiler 007.jpg
boiler 007.jpg (389.76 KiB) Viewed 7667 times


Kasiners 008.jpg
Kasiners 008.jpg (585.44 KiB) Viewed 7667 times

Re: Passenger Cars

Posted: Thu Apr 13, 2017 10:18 pm
by bob turner
I would have deleted one of the last two, but do not know how to do that. it ought to be simple.