IMP Gondola Project
Posted: Sat Oct 21, 2017 11:29 am
I know there is occasional interest in old kits here. Well here is one I bought off eBay several years ago. It was already built, and has a coat of awful black paint applied. I finally dug it out and plan to add it to my roster. My idea was to upgrade it with better details, give it a proper paint job, lettering etc.
Before an old model can interact with more current ones it needs a minimum of proper height Kadee couplers and decent trucks. I spent a few hours altering this car to include those two needs.
After handling it and dragging it along behind a freight to make certain it was going to at least operate nice, I am now wondering if newer details like PSC are worth the effort. As it sits now It is complete and properly assembled and with the fresh paint and accurate lettering it would blend in with everything else.
Those 1950 detail parts are all simple brass stampings, soldered in place. Question is...Do I owe this old car some respect...as in leave it be an old model as build by whoever wrote that note (bought and built all in one day) on the backside of the one sheet drawing? Or do I start ripping off all those bits, and make it more like what we are use to with todays model?
Pictures attached to give visual reference. Opinions are solicited and encouraged.
Robert
Before an old model can interact with more current ones it needs a minimum of proper height Kadee couplers and decent trucks. I spent a few hours altering this car to include those two needs.
After handling it and dragging it along behind a freight to make certain it was going to at least operate nice, I am now wondering if newer details like PSC are worth the effort. As it sits now It is complete and properly assembled and with the fresh paint and accurate lettering it would blend in with everything else.
Those 1950 detail parts are all simple brass stampings, soldered in place. Question is...Do I owe this old car some respect...as in leave it be an old model as build by whoever wrote that note (bought and built all in one day) on the backside of the one sheet drawing? Or do I start ripping off all those bits, and make it more like what we are use to with todays model?
Pictures attached to give visual reference. Opinions are solicited and encouraged.
Robert