Page 1 of 3
Imported Brass - equal time
Posted: Fri Dec 08, 2017 3:49 pm
by bob turner
Don't want to slight the high end brass collectors. Unfortunately all I have is KTM:

- Aviary Photo_131082439473720864.png (5.06 MiB) Viewed 8373 times
Re: Imported Brass - equal time
Posted: Fri Dec 08, 2017 4:24 pm
by sleepmac
Beautiful!
Dan Weinhold
Re: Imported Brass - equal time
Posted: Fri Dec 08, 2017 7:12 pm
by aterry11
Re: Imported Brass - equal time
Posted: Sat Dec 09, 2017 12:36 am
by E7
Looks pretty good to me Bob. Maybe if I were armed with a bunch of Prototype pics I could compare and find faults, but without those, no dice. I can look at the EMD stuff and tell you if I like it or not almost immediately, but the PA's not so much.
Re: Imported Brass - equal time
Posted: Sat Dec 09, 2017 11:43 am
by HHS

- RDG 712 (800x450).jpg (285.45 KiB) Viewed 8278 times
TCS DS-4-4-100
Re: Imported Brass - equal time
Posted: Sat Dec 09, 2017 2:10 pm
by bob turner
Nice. Here is another of mine:

- TW-8 2.JPG (27.95 KiB) Viewed 8252 times
Re: Imported Brass - equal time
Posted: Sun Dec 10, 2017 8:53 am
by HHS

- IMG_20170427_223444685_HDR (800x450).jpg (385.31 KiB) Viewed 8222 times
LV 116, Alco HH660 by TCW
Re: Imported Brass - equal time
Posted: Sun Dec 10, 2017 8:23 pm
by bob turner
Weaver counts as imported brass! 2-railed by my brother:

- Weaver and KLine 005.jpg (532.85 KiB) Viewed 8178 times
Re: Imported Brass - equal time
Posted: Mon Dec 11, 2017 2:16 am
by E7
HHS,
Tell us more about your switchers please! Thanks!
Re: Imported Brass - equal time
Posted: Mon Dec 11, 2017 11:33 am
by up148
bob turner wrote:Don't want to slight the high end brass collectors. Unfortunately all I have is KTM:
Aviary Photo_131082439473720864.png
Stunning paint work!!!!!!!!!!!!!!!!
BH
Re: Imported Brass - equal time
Posted: Mon Dec 11, 2017 12:14 pm
by bob turner
Overland factory paint.
The following photo was added in an edit - it has nothing to do with the comment, and I cannot delete or move it. I tried three times. Not a big deal; it is a nice photo of an Overland with my paint.
Re: Imported Brass - equal time
Posted: Mon Dec 11, 2017 7:58 pm
by HHS
postby E7 ยป Mon Dec 11, 2017 2:16 am
HHS,
Tell us more about your switchers please! Thanks!
"We have met the enemy and he is us!" Pogo Possum
E7 and all,
The Car Works (TCW) diesels are imported brass with Weaver drives. TCW imported models in HO and O scale. In O both standard gauge and On2.
The also had log loaders and cars, steam shovels. They also had a big selection of trolley and elevated items.
From what I can see on line, they did two versions of Baldwin switchers, a DS4 and the VO, and two versions of the Alco HH series 600 & 660 HP, an RS1, and also a FM switcher in O standard.
Picked mine up second hand. All had the typical cracked Weaver gear or sprocket, sometimes both. For me, easy replacement work.
Both had already been painted very nicely.
Hugh
Re: Imported Brass - equal time
Posted: Tue Dec 12, 2017 6:23 am
by sarge
Adding on to Hugh's list, Stan also did the four Alco S-classes, the S-5/6, the T6, the HH900 and HH1000, and FM H-15-44/H-16-44 road switchers in quite a number of variations.
There was an assortment of odd traction and PRR cabins as well.
Re: Imported Brass - equal time
Posted: Tue Dec 12, 2017 9:46 am
by Robert
I bought this Car Works FM H16-44 from Bill Davis. I added better headlight lenses and DCC... it runs like a charm.
Robert
IMG_5873.JPG
Re: Imported Brass - equal time
Posted: Tue Dec 12, 2017 2:24 pm
by Carey Williams
Hello Imported brassers.
Imported brass got off on the wrong foot with International Model Products (IMP) about 1949 + - ... quality lacked ...in the drive train .. and detailing ..some interesting models were offered filling a niche for cheap O scale offered for 2 and 3 rail . It has been written that the builders were scattered around Tokyo? each working on a particular model or line ...so quality varied from item to item wildly . 1952 IMP advertised for special order only the Challenger requiring a $50.00 deposit ..two weeks for construction and balance of $145.00 ( total price $195.00) upon delivery . So we can assume the best builder (s) were used for the Challenger .
Here we have two Challengers ... one is twice the weight of the other ... one has brake shoes none on the other... heavier one much heavier gauge brass than the other .... etched numbers and UP on cab and tender ... drive appears to be the same more or less ... so are they both IMP? built on different kitchen tables ? ..... the heavy one is pretty decent for the much maligned IMP reputation.... the light weight one falls more inline with the IMP Pacific and Atlantic ...basic, brass and cheap.
Any insight much appreciated .
Cheers Carey

- impcatalog1952pg2.jpg (199.67 KiB) Viewed 7978 times
The heavy one ... much better detail save the lack of brake shoes and hatch on cylinders as found on the light weight one

- IMG_6960.JPG (909.23 KiB) Viewed 7978 times

- IMG_6961.JPG (832.84 KiB) Viewed 7978 times

- IMG_6962.JPG (1.15 MiB) Viewed 7978 times

- IMG_6963.JPG (682.22 KiB) Viewed 7978 times
Now the light weight one .... ladder big enough for King Kong on side

- IMG_6966.JPG (1.12 MiB) Viewed 7978 times

- IMG_6965.JPG (782.57 KiB) Viewed 7978 times

- IMG_6964.JPG (676.45 KiB) Viewed 7978 times

- IMG_6969.JPG (1.33 MiB) Viewed 7978 times