Page 1 of 2

Is this a fair price.................

Posted: Fri Dec 22, 2017 8:02 pm
by herronpeter
...........for this switcher not quite ready to run?

https://www.ebay.com/itm/391946936020?ul_noapp=true

I wanted the boiler for a fantasy project 2-6-2 I want to build on a wrecked chassis and rear engine of a Sunset Models Samson, a very small 2-6-6-2.

I was hoping to grab it for 50-75 bucks.................

Peter

Re: Is this a fair price.................

Posted: Fri Dec 22, 2017 8:26 pm
by bob turner
Yes. You will be extremely lucky to get even most of the pieces in a basket for $100. This one was a bargain under $300.

Had a guy come by the other day, looking to buy my 1965 convertible Mustang. He was thinking two grand.

Re: Is this a fair price.................

Posted: Fri Dec 22, 2017 9:26 pm
by Jay Criswell
Bob,

It may be that the bidders realized that's not a Lobaugh tender.

Jay

Re: Is this a fair price.................

Posted: Fri Dec 22, 2017 9:43 pm
by bob turner
I didn't look closely, since I don't need one - but you are correct - looks like a Thomas tender. Can't imagine the tender would be much more than $50 of the total value.

Re: Is this a fair price.................

Posted: Sat Dec 23, 2017 12:26 am
by Jay Criswell
I wouldn't begin to speculate on the thought process or value placed by any bidder.

Jay

Re: Is this a fair price.................

Posted: Sat Dec 23, 2017 8:33 am
by Rufus T. Firefly
bob turner wrote: Can't imagine the tender would be much more than $50 of the total value.


I'd give him $10 for the trucks, :wink: :wink:

Re: Is this a fair price.................

Posted: Sat Dec 23, 2017 9:40 am
by herronpeter
I just thought of something........ Do any of you have a Cab/boiler laying around that might suit my purpose. Needs to be about the size of a normal 0-6-0 or smallish 0-8-0 with a fat boiler. Looking to build something like this.......

3599630158_0d70ab874a_b.jpg
3599630158_0d70ab874a_b.jpg (508.36 KiB) Viewed 6496 times


Peter

Re: Is this a fair price.................

Posted: Sat Dec 23, 2017 1:14 pm
by bob turner
Well, yes. It is a 1 1/2" dia. brass tube. If you need it slightly tapered, you slit the belly and insert a wedge. Smokebox is another piece of tube with a riveted and soldered overlay. The difficult part is all that other stuff - cab, running boards, piping, domes . . .

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 9:12 am
by herronpeter
Ha ha, Mr. Turner............

The other alternative is to cut 3 1/2 " off the original Samson boiler, move the smokestack, bell and light and find a boiler front to fit. That is a lot of work for a whimsical project as I'm trying to build a layout with scenery and structures etc etc**. Only so many hours in a day so anything to save time............

**




IMG_2561(1).jpg
IMG_2561(1).jpg (151.29 KiB) Viewed 6427 times


Peter

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 10:48 am
by Jay Criswell
Peter,

Sometimes the replies and advice given here reminds me of the cartoon in an old Model Railroader magazine. It was something to the effect of how to make a Big Boy out of a Varney Docksider. Similar to the old Kemtron instructions......here's a list of parts and here's a photo of the completed model and nothing in between.

Jay

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 1:13 pm
by herronpeter
How right you are, Jay!!

When I look at my layout I wonder why it is not further along than it is. Then I remember I do everything myself.
Build the bench-work, hand lay the track, wire the track/switches-powered frogs, build the structures, some heavily modified kits*, some scratch built, re-motor, paint, weather locomotives as well as install DCC. The turntable is a Keith Wiseman kit, modified and powered by an auto electric window motor.............etc etc.

Hey, it's all fun but slow.........

Have a great Holiday Jay as well as all you other 2 rail fans found here!

Peter

*can anyone identify the engine house kit in the photos?

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 2:01 pm
by bob turner
My offer was in good faith. I would have needed a worthwhile trade, but this size boiler is simply trivial. There was a time when Lorenzen offered surplus Lobaugh boilers, but no more.

As for the Sampson boiler, your proposal would be ok if you cut very carefully with a Dremel disc. The boiler would quickly fail with even a very fine tooth hacksaw. Either of your alternatives will be costly to start.

Stevenson has domes and stacks. PSC still offers the Kemtron cab.

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 3:29 pm
by Jay Criswell
Hey Bob,

Doesn't SPL offer some cast boilers also? I'll go check.

Jay

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 3:32 pm
by Jay Criswell
Peter,

Don't know if there's anything here you can use.

http://stevensonpreservationlines.com/i ... sd29i7r1u0

Jay

Re: Is this a fair price.................

Posted: Sun Dec 24, 2017 11:20 pm
by Nortonville Phil
Peter,

I wonder if one of the Bachman 0n30 boilers would work for you. The Ten wheeler they make is pretty big for a narrow gauge engine. Might work for a small prairie logger. Those are not brass though.