Page 1 of 1
.
Posted: Thu Jan 18, 2018 2:38 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Thu Jan 18, 2018 2:48 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Thu Jan 18, 2018 7:31 pm
by bob turner
As I recall, these are four axles powered. A lousy idea. I thought about a Delrin chain to the idler axle, but never got around to it.
Re: Back To Sunsets GG1!
Posted: Thu Jan 18, 2018 8:09 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Thu Jan 18, 2018 8:42 pm
by Erik C Lindgren
Such a beautiful model.
Re: Back To Sunsets GG1!
Posted: Thu Jan 18, 2018 9:16 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Thu Jan 18, 2018 11:48 pm
by bob turner
I agree - gorgeous. I have five older GG1 doorstops; could not justify buying one of these. They did come through my shop. I have a pair of FF2s (or whatever GN called them). They are powered the same, and it takes both of them to pull four K-Line 21" ers on level ground.
Re: Back To Sunsets GG1!
Posted: Fri Jan 19, 2018 1:45 pm
by PRR Man
Bob,
I had gone as far as purchasing the correct sprockets and chain to drive the idler set from the center driver.
I did want to originally use a cog and belt drive, but there was not a cog made narrow enough to fit between the gearbox & driver.
hopefully I'll get around to improving the drive.
Re: Back To Sunsets GG1!
Posted: Fri Jan 19, 2018 2:49 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Fri Jan 19, 2018 4:58 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Fri Jan 19, 2018 6:30 pm
by sarge
Good for you!
Re: Back To Sunsets GG1!
Posted: Fri Jan 19, 2018 6:42 pm
by 2railjon
.
Re: Back To Sunsets GG1!
Posted: Fri Jan 19, 2018 8:02 pm
by J. S. Bach