Page 1 of 1

.

Posted: Sun Mar 18, 2018 12:50 pm
by 2railjon
.

Re: Rufus Fever Has Returned!

Posted: Sun Mar 18, 2018 9:56 pm
by Erik C Lindgren
Awesome

Re: Rufus Fever Has Returned!

Posted: Mon Mar 19, 2018 9:11 am
by Rufus T. Firefly
Oh, dear.........

Well, that should keep idel hands occupied for a little while, :wink:

Re: Rufus Fever Has Returned!

Posted: Mon Mar 19, 2018 1:38 pm
by 2railjon
.

Re: Rufus Fever Has Returned!

Posted: Mon Mar 19, 2018 1:41 pm
by Rufus T. Firefly
They are fun to assemble, particularly when there is actually a slot for each tab, :roll: :roll: :roll: :roll: :roll:

Re: Rufus Fever Has Returned!

Posted: Mon Mar 19, 2018 4:59 pm
by 2railjon
.

Re: Rufus Fever Has Returned!

Posted: Mon Mar 19, 2018 6:50 pm
by Rufus T. Firefly
2railjon wrote:Will the rubber bands over a few days shape the wood or do you recommend wetting the roof and doing this?


There are internal roof members holding that curve and I'd rely on those and even add a few extra before wetting that roof which just might warp in every direction except the one you want it to go towards.

Re: Rufus Fever Has Returned!

Posted: Tue Mar 20, 2018 7:47 am
by PRR Man
you may want to make a 'buck' of the roof curvature, carefully wet the roof wood and wrap it around the buck so it takes on its shape as it dries.

I've not made any of the MR kits, but I can't imagine the roof members being stout enough to hold the curve over time. how thick is it?

Re: Rufus Fever Has Returned!

Posted: Tue Mar 20, 2018 3:44 pm
by 2railjon
.