Page 1 of 2

Model under Contruction I G N (MP) #896 Dome

Posted: Thu Apr 05, 2018 9:22 am
by cole7015
T&P 200 Pullman dome car Dallas Tx 62.jpg
This is the final series on this model. Painting decaling and lighting. The building portions was dealt with
back in August 2017. viewtopic.php?f=10&t=17163&p=323098&hilit=Mp+dome+coach+build#p323098

More coming soon

Bill Basden Delta Models

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Fri Apr 06, 2018 7:47 am
by cole7015
OK here is the beginning of the painting photo's. main car body painted interior light gray main walls light yellow ceiling,
I like to do the ceilings this way makes the lighting look warmer ---- very small LED's and exterior colors Eagle Blue
with Eagle Gray Floquil paint has been clear coated with Crystal cote ready for decals and striping. Buff yellow and
brushed silver strips from Line O Tape. all painting done with Passahe series H air brush.



Bill Basden

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Fri Apr 06, 2018 9:01 am
by Erik C Lindgren
My goodness what a masterpiece

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Fri Apr 06, 2018 6:05 pm
by 2railjon
WOW!!! :D

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Fri Apr 06, 2018 7:13 pm
by R.K. Maroon
First-class work as always, Bill. Thanks for sharing.

Thanks especially for sharing the tip about painting the interior roof pale yellow to warm up (and diffuse, I imagine) the light from the LEDS. Neat and simple trick. In the old days of course a lot of passenger kit cars had wood roofs, and if you left them unpainted, that would have worked too. But no LEDS. I have some cars with hand-made strings of grain-of-wheat bulbs, but those power-hungry Walthers tube bulbs were more common, or (worse), big incandescent flashlight bulbs stuck up through the floor. I like preserving old models but I will upgrade lighting with no remorse.

Jim

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sat Apr 07, 2018 9:03 am
by cole7015
Here is more photo's of the Seating and mural modules for the Dome short end. I make modules and use 1.4 MM sheet metal
screws to mount to the side angle soldered to the car side. this makes it easy to work with, all my cars are done this way.

The sub floor and walls are done using .016" brass sheet and soldered together.

The murals are made by using unique landscape photo's scaled down to be 2x3 feet and printed on gloss photo paper.
them mounted to mirror card stock and trimmed to represent a metal frame. the seatin parts are cast resin from our
extensive parts line.

I do not use any figures in my cars, because most on the market are over and under size.

Bill Basden Delta Models www.deltamodelsusa.com

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sat Apr 07, 2018 9:20 am
by Robert
Really fine model work and the attention to detail we modelers admire.

Robert

Re: Model under Contruction I G N (MP) #896 Dome more photo's

Posted: Sun Apr 15, 2018 6:41 am
by cole7015
Here are some painted and decal ed Dome body with all stripping and lettering the silver is brushed aluminum
stripes from Line O Tape. This saves hours and looks better than decals, mainly used for model cars.

All painting has now been completed, next step is window material for the car body and dome section.
then the lighting installation.

Bill Basden Delta Models deltamodelsusa.com

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sun Apr 15, 2018 9:00 am
by Bob Anson
super work Bill, those seats look like the same ones Pantera sold at one time.
Bob Anson

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sun Apr 15, 2018 9:49 am
by 2railjon
Amazing work! Thank you for sharing!!!!

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sun Apr 15, 2018 10:41 am
by bob turner
Beautiful. Let us know how you attach glazing in that dome - I have a couple that need new clear windows.

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sun Apr 15, 2018 8:28 pm
by cole7015
Thanks for all the nice comments.

Here is some more photo's that are finished painting
ready to screw in to there proper location. One they are screwed into there sub assembly
you will understand why they are painted like they are. the window glazing is .030" thick
lexan sheeting and epoxy to the walls.


Bill Basden Delta Models deltamodelsusa.com



Sorry board quota data has been reached 7 new photo's did not load

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Sun Apr 15, 2018 10:52 pm
by cole7015
cole7015 wrote:Thanks for all the nice comments.

Here is some more photo's that are finished painting
ready to screw in to there proper location. One they are screwed into there sub assembly
you will understand why they are painted like they are. the window glazing is .030" thick
lexan sheeting and epoxy to the walls.


Bill Basden Delta Models www.deltamodelsusa.com



Sorry board quota data has been reached 7 new photo's did not load

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Mon Apr 16, 2018 12:11 am
by De Bruin
Bummer, guess we'll have another "culling" too.
I got so sick of this I decided to use Photo bucket and and just post the links instead. Not that Photo bucket is good or easy to use, but it beats the aggravation with the memory storage here.

Re: Model under Contruction I G N (MP) #896 Dome

Posted: Tue Apr 24, 2018 3:50 am
by cole7015
Bob Anson wrote:super work Bill, those seats look like the same ones Pantera sold at one time.
Bob Anson