Page 1 of 2

Corbin Q Hudson

Posted: Thu Sep 13, 2018 3:56 pm
by Erik C Lindgren
Brasstrains generally leaves up the sales for awhile but this appeared and disappeared kind of like OGR posts.
Nice piece
A4FE57C3-4470-4204-9848-D6FE33722EA8.png
A4FE57C3-4470-4204-9848-D6FE33722EA8.png (3.34 MiB) Viewed 6003 times
50F3D2FD-02A5-46CE-B6FA-38619F9C1E7E.png
50F3D2FD-02A5-46CE-B6FA-38619F9C1E7E.png (2.91 MiB) Viewed 6003 times
8474105A-B8BC-402C-AEE5-E9A1A81D7D4A.png
8474105A-B8BC-402C-AEE5-E9A1A81D7D4A.png (3.67 MiB) Viewed 6003 times

Re: Corbin Q Hudson

Posted: Thu Sep 13, 2018 5:22 pm
by De Bruin
Good catch, beautiful engine, nice build. Is it my imagination or do Hudson's get short shrift from the O manufacturers?. You would figure these CB&Q's would have been in sufficient demand. I was pleasantly surprised when Weaver did their NKP 4-6-4 (neat looking little engine)

Re: Corbin Q Hudson

Posted: Thu Sep 13, 2018 6:55 pm
by bob turner
Sunset did a nice one. PSC did one with so many pieces in each tender truck that I refused to touch them. And I did one for 48/ft. I would say that whatever market there was for these was adequately treated. Corbin must have made a few, because the one that drifted through here was not as nice as the one above.

Re: Corbin Q Hudson

Posted: Fri Sep 14, 2018 8:53 pm
by 2railjon
My Sunset is pretty sweet and for a great price.
Image

Image

Image

Image

Re: Corbin Q Hudson

Posted: Fri Sep 21, 2018 11:09 pm
by De Bruin
Damn, that's a beauty too Jon. Do you have cars for it, or is it in perishable service? (OK just trying to get you to post more pictures, cause you know we love those)
Done some more digging, my impression that Hudson's are under represented in 1:48 world is clearly fushitsa,
Besides 2RJ's Sunset CB&Q, the aforementioned Weaver NKP, their NH I-4 and of course the all the various builders multiple incarnations of CMStP&P F's, and NYC J's till the cows come home. Here's some more, feel free to post any others....

PRB did one of the AT&SF classes (a troubled run as I understand)
Pretty sure Weaver did one of the CP's H1 Royal Hudson's
Have to think someone did C&NW's E4's, anyone?

then a list of those I think haven't been done
Frisco's ten 1060 class rebuilds (wild and weird)
DL&W five 1151 class (gorgeous)
Wabash P-1's (ditto)
Maine Central's two D class (perfect)
CN K-5A's
B&O's four Emerson experimentals
NdeM had a really cool looking class of these (but no one ever counts them right?)
IC #1 (one rebuilt from a 2-8-4 - major fail but looks great in a "USRA" way)

of course, mea culpa, I do not pay much attention to Mike's Toy House so there may some of these "done" I'm oblivious of.

Re: Corbin Q Hudson

Posted: Sat Sep 22, 2018 12:36 am
by E7
Don't forget the ubiquitous Dreyfus.

Re: Corbin Q Hudson

Posted: Sat Sep 22, 2018 8:28 am
by 2railjon
Did someone say Dreyfus? :mrgreen:
Image

Image

Re: Corbin Q Hudson

Posted: Sat Sep 22, 2018 8:32 am
by 2railjon
My absolute favorite Hudson!
The J3a.
Image

Image

Re: Corbin Q Hudson

Posted: Sat Sep 22, 2018 12:34 pm
by bob turner
Yep. Good lines.

Re: Corbin Q Hudson

Posted: Mon Sep 24, 2018 9:33 pm
by rogruth
I agree.

Could someone tell me why I like the Empire State Express loco but don't care for those styled by Dreyfuss when they are almost the same?

Re: Corbin Q Hudson

Posted: Mon Sep 24, 2018 9:54 pm
by bob turner
Sure. It is personal taste. I am the exact opposite. You have seen my Dreyfuss many times - wood block tender, and homemade drivers and frame.

Re: Corbin Q Hudson

Posted: Mon Sep 24, 2018 10:13 pm
by De Bruin
Purely subjective right? I think it depends on what your threshold for Buck Rogers-like futuristic embellishment is. I like all three of the versions Jon's posted here so ....
Since the 1940 Empire State version was intended to blend with that beautiful Budd built stainless steel train, the stylist (whom I can't identify) very wisely mixed the silver sheathing half and half with black to a better aesthetic effect (all opinion) than most other attempts to mate a stainless train with a shrouded steam locomotive, as in "less is more."
At least that's how I parse the difference, I personally like the postwar Dreyfuss version, as I also prefer the postwar two tone scheme to the prewar scheme. The coolest thing to me about these state of the art J's are the Scullin disc drivers, which a lot purists often dislike in comparison to more traditional spoke drivers.

https://www.american-rails.com/empire.html

Re: Corbin Q Hudson

Posted: Mon Sep 24, 2018 11:38 pm
by E7
I'll cast my vote for the J3a

Re: Corbin Q Hudson

Posted: Mon Sep 24, 2018 11:53 pm
by E7
rogruth wrote:I agree.

Could someone tell me why I like the Empire State Express loco but don't care for those styled by Dreyfuss when they are almost the same?


Eye appeal......and it's a subtle thing. Take a woman you consider beautiful.......then put a bid wart on the end of her nose! Oh my!!!!!!!!

Re: Corbin Q Hudson

Posted: Tue Sep 25, 2018 1:18 pm
by ScaleCraft
Youse guys are narrow of vision.
ScaleCraft.
Mi-Loco (and iterations thereof).
For sure some unidentifiable as of yet.

Early days (as now) everybody made a K4 and Hudson....it was just done that way....heck, they looked out the window and there were several visible....