Page 1 of 2

Smoky Mountain 70-Ton Flat Car

Posted: Sun Dec 16, 2018 2:03 pm
by RDSRR
Just about finished my Smoky Mountain Model Works AAR 53' 6", 70-Ton Flat Car. I used a wood deck in place of the supplied urethane deck. Being what I call a "runner" on the layout I used Kadee couplers for switching. Decals from Protocraft.
Working on the loads now.

Re: Smoky Mountain 70-Ton Flat Car

Posted: Sun Dec 16, 2018 4:48 pm
by sleepmac
Dan, very nice!

Dan Weinhold

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 7:50 am
by 2railjon
Beautiful!
Question if you would, do you apply decals to gloss paint and then Dullcote it?

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 8:56 am
by RDSRR
2railjon wrote:Beautiful!
Question if you would, do you apply decals to gloss paint and then Dullcote it?


Mostly. I only use Scalecoat on rolling stock which gives me the great glass finish ready for decals. I stopped using Dullcote years ago after Matthew Forsyth suggested Krylon 1311 matte spray. I really like it right out of the rattle can. Decals and I have a love hate relationship but this turned out very well.

PM16832_3.jpg
PM16832_3.jpg (71.5 KiB) Viewed 6180 times

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 11:54 am
by Rufus T. Firefly
RDSRR wrote:I stopped using Dullcote years ago after Matthew Forsyth suggested Krylon 1311 matte spray. I really like it right out of the rattle can.


Similarly, I also discontinued using Dullcote years ago and switched to Rustoleum matte spray, and also right out of the rattle can.

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 1:00 pm
by R.K. Maroon
Nice finish work on the deck, Dan. Any tips there to share on how you approached that?

Jim

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 1:33 pm
by bob turner
Nice decals.

I have been having trouble with Krylon and Rustoleum - mostly nozzle and propellant problems. I have found that "Dupli-Color, while twice as expensive, puts out a nice even spray pattern and allows me to use all the paint even after a couple years between spray jobs.

Krylon was really, really good right up into the 1990s, but now not worth the effort. Rustoleum made it to about 2010 before dropping the ball.

They hire the same kind of people that Hotmail hires: "Let's keep changing things until nobody knows what is going on!"

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 1:57 pm
by RDSRR
R.K. Maroon wrote:Nice finish work on the deck, Dan. Any tips there to share on how you approached that?

Jim

I cut the wood to length using the urethane deck as a guide around the T section. I found some great "recipes" for staining wood. Here is a link: https://www.rustystumps.com/RSSMDownloa ... ipwood.pdf

I used the dull gray version. Once applied to the car it's all Pan Pastels simply worked in with a stiff brush till I thought it looked right.

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 4:21 pm
by R.K. Maroon
Thank you, Dan -- Great link. The articles are very informative (be sure to get part 2 by going to the rusty stumps home page). I was also unaware of the O-scale detail parts they sell. Lots of neat detail items.

Jim

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 6:37 pm
by rex desilets
Good job!
Since the car is resin, do you intend to run it empty? If not, have you added bracing underneath?

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 6:55 pm
by RDSRR
rex desilets wrote:Good job!
Since the car is resin, do you intend to run it empty? If not, have you added bracing underneath?


The kit includes a weight that fits into the sill. However, I am working on a tractor load. I build up all the chocks based on an old AAR spec. Next is the chain... The tractors are 1947 models and since I model 1947 well it works!

PM5.jpg
PM5.jpg (443.06 KiB) Viewed 6131 times

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 8:01 pm
by bob turner
1947 was a good year. Once we get past about 1965 I am no longer interested - in trains, cars (except for my wife's 635csi) and airplanes. Oh, I guess I did like the Airbus, but you gotta admit it looks like a big engined 737.

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 11:04 pm
by RDSRR
Chain came from Clover House. Note that is not round like some. A bit heavy bit it will work.

chains.jpg
chains.jpg (483.73 KiB) Viewed 6106 times

Re: Smoky Mountain 70-Ton Flat Car

Posted: Mon Dec 17, 2018 11:24 pm
by RDSRR
OK, I know that most farm equipment was strapped and not chained but... what are you going to do :mrgreen:

Re: Smoky Mountain 70-Ton Flat Car

Posted: Tue Dec 18, 2018 8:53 am
by Rufus T. Firefly
RDSRR wrote:......... was strapped and not chained but... what are you going to do :mrgreen:


O tempora! o mores! Ok, it's not really a problem these days as long as it's between consenting adults, :mrgreen: