Page 1 of 2

Aluminum Only. No brass Allowed

Posted: Tue Apr 30, 2019 10:51 pm
by bob turner
From Carey - really neat virgin Alexander kit. Perfect fit of all castings - very little cleanup. Thanks, Carey!

219346CE-89B6-44DA-9FD8-A69205889EAC.jpeg
219346CE-89B6-44DA-9FD8-A69205889EAC.jpeg (826.72 KiB) Viewed 7960 times

Re: Aluminum Only. No brass Allowed

Posted: Tue Apr 30, 2019 11:10 pm
by De Bruin
Neat car Bob, Carey has accumulated quite the early O scale collection.
Any ideas on how you'd finish it? This is an automobile car correct?

Re: Aluminum Only. No brass Allowed

Posted: Wed May 01, 2019 12:30 am
by ScaleCraft
You want them natural, or painted okay?

SC two bays. SC gons, SC stocks......GM tenders......have to czech....

Re: Aluminum Only. No brass Allowed

Posted: Wed May 01, 2019 12:50 pm
by bob turner
Painted ok. Have plenty of stock cars, don't think the NYC caboose is worthy.

Re: Aluminum Only. No brass Allowed

Posted: Wed May 01, 2019 4:43 pm
by ScaleCraft
bob turner wrote:Painted ok. Have plenty of stock cars, don't think the NYC caboose is worthy.

well.....since the SC caboose is wood and ZAMAC, not aluminum, I didn't include that.

I know. I threw enough away crumbled into little pieces......

Re: Aluminum Only. No brass Allowed

Posted: Wed May 01, 2019 5:43 pm
by ScaleCraft
Alexander, had two, gonna go to somebody else soon:
Image

Get more photos later

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 3:33 pm
by 2railjon
Oddly enough I discovered I do own an aluminum car!

Image

Image

Image

And on the topic of my flatcar, anyone know an inexpensive source for wood planking for it? None of my stores carry wood coffee stirrers.

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 4:21 pm
by rex desilets
Amazon does

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 7:05 pm
by Rufus T. Firefly
rex desilets wrote:Amazon does


Shocking! Simply shocking.....

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 8:25 pm
by robert.
Staples has them also

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 8:47 pm
by J. S. Bach
2railjon wrote:Oddly enough I discovered I do own an aluminum car!
And on the topic of my flatcar, anyone know an inexpensive source for wood planking for it? None of my stores carry wood coffee stirrers.

Thank you for this post, it allowed me to identify a four-truck flat that I have had for quite awhile.

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 8:56 pm
by 2railjon
Dave, any stamp on yours who made it?
As a side note, I think I bought or traded with Sarge for mine. Someone mentioned that this flatcar might actually have had steel decking instead of wood. Maybe Sarge might chime in if he knows.

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 9:50 pm
by sarge
Jon, that's one I did, yes. It was a PRR F34. The deck was steel with keyed holes in it for chain tie-downs with dogs on the ends, no wood.

Re: Aluminum Only. No brass Allowed

Posted: Mon May 06, 2019 11:44 pm
by J. S. Bach
2railjon wrote:Dave, any stamp on yours who made it? ...snip...

There is a "C. G. Davis" penciled on the underside. I bought the car (ebay) from "oldguyfromnj" about a year or so ago and I knew the car's builder, Carvey G. Davis, he was a noted Baltimore trolley enthusiast and O scaler. This car also has a steel deck. Note, I think that it would look better with a wood deck, though. Mine is tuscan and lettered ERIE 7214 and has Auel Bettendorf trucks. I am not sure yet if they are insulated as I need to put the trusty Simpson 270 on them; Carvey was a member of the B. S. M. E., an outside third rail club at that time.

I have (somewhere) an Athearn HO version of this car that is black and lettered ERIE 8086; the Athearn car has the couplers mounted on the span bolster instead of body-mounted as on our O scale cars. Years ago in Fort Lauderdale, I saw one of these prototype cars parked on a siding (got a photo or two; now lost) and duly noted that the coupler was span bolster-mounted. Athearn got it right! :mrgreen: Odd, I have the distinct impression that it, too, was lettered for ERIE. :?

Edit: Carvey usually dated his stuff when he completed his work, odd that he did not date this one; I have a few other cars that he did date.

Re: Aluminum Only. No brass Allowed

Posted: Tue May 07, 2019 6:01 am
by 2railjon
Sarge and Dave, cool info! Thanks for sharing!
If it was meant to have a steel deck I’ll leave it as is.