Raised the bridge to accommodate the larger engines
Posted: Mon Jul 12, 2021 10:09 am
Worked out well. 
Model Train Journal
Devoted to all facets of 3-Rail, O-Gauge, and Model Railroading
https://www.modeltrainjournal.vintagecastings.com/phpBB3/
Raised the bridge to accommodate the larger engines
https://www.modeltrainjournal.vintagecastings.com/phpBB3/viewtopic.php?f=2&t=19263
Page 1 of 1
Re: Raised the bridge to accommodate the larger engines
Posted: Mon Jul 12, 2021 10:50 pm
What am I missing here?
Re: Raised the bridge to accommodate the larger engines
Posted: Tue Jul 13, 2021 2:50 am
When I first built it,the brudge was not high enough to accommodate some of my larger engines so I raised it 2 inches.
Re: Raised the bridge to accommodate the larger engines
Posted: Tue Jul 13, 2021 9:16 am
philo426 wrote:When I first built it,the brudge was not high enough to accommodate some of my larger engines so I raised it 2 inches.
That's what it looks like to me - opened up that blue bit at the bottom and tacked on 2" under it.
Re: Raised the bridge to accommodate the larger engines
Posted: Tue Jul 13, 2021 1:04 pm
Yes
Re: Raised the bridge to accommodate the larger engines
Posted: Tue Jul 13, 2021 7:14 pm
Bridge extension is assembled and painted.I will let it cure overnight before joining the sections together. 
Re: Raised the bridge to accommodate the larger engines
Posted: Wed Jul 14, 2021 2:58 pm
Bridge installed and I went with led lighting. 