Recent acquisitions & restoration projects.....
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Recent acquistions & restoration projects.....
Interesting. Don't see many duckbill roofs.
And in wood, no less.
I have an aluminium sided coach (normal heavyweight, if there is such a thing) with sides that screw onto wood floor and roof.
Got some ideas, ranging from probable to obscure, not really sure. I like it, tho.
I'd buy more if I could find them, and they were cheap.
Determined scale yet?
And in wood, no less.
I have an aluminium sided coach (normal heavyweight, if there is such a thing) with sides that screw onto wood floor and roof.
Got some ideas, ranging from probable to obscure, not really sure. I like it, tho.
I'd buy more if I could find them, and they were cheap.
Determined scale yet?
Dave....gone by invitation
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
Got it disassembled.


Floor is a lost cause, but that's not a problem to build a new floor. Ends are bronze castings with brass treads that are applied. Got to strip them down to the metal, replace the end rails, etc...
Scale? Looks to be 1/4" but not having a prototype measured drawing in hand, it's kind of hard to make that call given that car dimensions pre-1900 were variable, to say the least.


Floor is a lost cause, but that's not a problem to build a new floor. Ends are bronze castings with brass treads that are applied. Got to strip them down to the metal, replace the end rails, etc...
Scale? Looks to be 1/4" but not having a prototype measured drawing in hand, it's kind of hard to make that call given that car dimensions pre-1900 were variable, to say the least.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Recent acquistions & restoration projects.....
Here is a possibilty: American Model Railway Company, a.k.a Alexander, 1937 catalog:




The link below any photo will display the image full size
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
R.K. Maroon wrote:Here is a possibilty: American Model Railway Company, a.k.a Alexander, 1937 catalog:
You win the free Kewpie doll!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
jw_clarke54
- Posts: 517
- Joined: Sun Mar 27, 2011 8:58 pm
Re: Recent acquistions & restoration projects.....
Rufus, on the undercarrage, are those Lionel truck plates???
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Recent acquistions & restoration projects.....
Sure look like it to me. Need some more? I have......several....
Dave....gone by invitation
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
jw_clarke54 wrote:Rufus, on the undercarrage, are those Lionel truck plates???
Nope. Turns out that's a washer soldered to a bit of brass screwed down to the block of wood.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
So, built up a new floor from 2 layers of scribed siding and a basswood blank; mortised out the ends to accept the bronze end castings - paint remover and wire brush - underbody framing, truss rods that are anchored in the layering of the floor, and the bronze ends into the mortises with Goo and CA and also under the top layer of siding/flooring.


Got body bolsters in place for a pair of Lobaugh trucks....
The sides & ends fit nicely on this floor. Now I have to think about the interior


Got body bolsters in place for a pair of Lobaugh trucks....
The sides & ends fit nicely on this floor. Now I have to think about the interior
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Recent acquistions & restoration projects.....
Waiting for more.
roger
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Recent acquistions & restoration projects.....
Martin, I post photos of recent acquisitions and then it's often (usually......always) years before I do anything with it. A little discipline in this regard would go a long way for me.
Looking very good -- scribed wood on the interior floor where no one will see it. Nice touch -- Isn't there some saying about those who make things correct even if nobody will ever see or know? And what is your source for the scribed wood siding and the interesting bolster plates?
Jim
Looking very good -- scribed wood on the interior floor where no one will see it. Nice touch -- Isn't there some saying about those who make things correct even if nobody will ever see or know? And what is your source for the scribed wood siding and the interesting bolster plates?
Jim
The link below any photo will display the image full size
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
R.K. Maroon wrote:Martin, I post photos of recent acquisitions and then it's often (usually......always) years before I do anything with it. A little discipline in this regard would go a long way for me.
Not to worry. This specific project has been waiting for a few years. I've just decided to work on projects and unless something shows up that I can not resist, I'm not buying much of anything.
Looking very good -- scribed wood on the interior floor where no one will see it. Nice touch -- Isn't there some saying about those who make things correct even if nobody will ever see or know? And what is your source for the scribed wood siding and the interesting bolster plates?
I put the scribed flooring in since I'll do an interior. That specific scribed wood was from Kappler. I have a pretty fair staock of siding, clapboard, and stripwood from Kappler in the shop; little from Midwest, less yet from Mt. Albert, and next to none from Northeastern.
Bolster plates are Walthers; probably still available from Keil-Line.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
Got a little done on this car...
Got a bit of the underbody installed and managed to smooth and even out the roof a bit; have to re-drill holes for the vents - nice brass turned bits under that paint! - maybe some detail about the non-existent clerestory vents to add....

Sides are coming together now and after I shoot a layer of primer I'll have a better idea about that; ends are ok now, too.

Got a bit of the underbody installed and managed to smooth and even out the roof a bit; have to re-drill holes for the vents - nice brass turned bits under that paint! - maybe some detail about the non-existent clerestory vents to add....

Sides are coming together now and after I shoot a layer of primer I'll have a better idea about that; ends are ok now, too.

What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
Slow going, but the interior is getting done now.


The fun part is that the spacing between every window is different. Every bit of wood has to be custom cut to fit. And, I nicked myself really good 2 days ago and it started bleeding again last night. Last thing I want to do is get blood on the interior - no idea if I can paint over that or not,


The fun part is that the spacing between every window is different. Every bit of wood has to be custom cut to fit. And, I nicked myself really good 2 days ago and it started bleeding again last night. Last thing I want to do is get blood on the interior - no idea if I can paint over that or not,
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Recent acquistions & restoration projects.....
Looks like we are well along the transition from sow's ear to silk purse.
I like the MOW car a lot. Those are among my favorites.
Take care that you don't repeat that old Saturday Night Live skit about Julia Child!
Rich
I like the MOW car a lot. Those are among my favorites.
Take care that you don't repeat that old Saturday Night Live skit about Julia Child!
Rich
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Recent acquistions & restoration projects.....
E7 wrote:Take care that you don't repeat that old Saturday Night Live skit about Julia Child!![]()
Save the liver!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: sleepmac and 87 guests