Recent acquisitions & restoration projects.....

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Recent acquistions & restoration projects.....

Postby rogruth » Tue Oct 22, 2013 1:25 pm

Rufus T. Firefly wrote:
rogruth wrote:Rufus,Erik and others.

Do you put scale model people in your locos,cabooses,passenger cars,etc.,?


Yes, but not always. Depends on the car and what it's purpose is and how I feel about it and the scene that I might be setting within the car itself.

If I could find passengers for the 1880-1920 era, I might do more with the interior populations in my passenger cars.


Murph gets a lot of his people from www.bakersrailroadshop.com.

He may have some from that period.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Tue Oct 22, 2013 8:52 pm

rogruth wrote:
Rufus T. Firefly wrote:
rogruth wrote:Rufus,Erik and others.

Do you put scale model people in your locos,cabooses,passenger cars,etc.,?


Yes, but not always. Depends on the car and what it's purpose is and how I feel about it and the scene that I might be setting within the car itself.

If I could find passengers for the 1880-1920 era, I might do more with the interior populations in my passenger cars.


Murph gets a lot of his people from http://www.bakersrailroadshop.com.

He may have some from that period.


Bookmarked long ago... Good stuff!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Nortonville Phil
Posts: 223
Joined: Sat Jul 31, 2010 11:05 pm
Location: Red Oak TX
Contact:

Re: Recent acquistions & restoration projects.....

Postby Nortonville Phil » Mon Nov 11, 2013 5:50 pm

Here is a recent box car that I picked up off Ebay for not much. I plan to finish it and put it on arch bar trucks and scale couplers.

Image

Image

Image

PHil
Trinity Valley Traction Co.
Texas Midland Railroad
Homewood Shops
Red Oak, TX

My traction blog: Bluebonnet Limited
http://bluebonnetlimited.blogspot.com/

Homewood Shops YouTube:
https://youtube.com/@cug6?si=BCFnDDtUw2eVKamo

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Recent acquistions & restoration projects.....

Postby rogruth » Mon Nov 11, 2013 7:10 pm

Looks to be a nice car.Waiting to see it when you have made repairs[?].
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

DeBruin
Posts: 892
Joined: Sat Aug 07, 2010 1:05 pm
Location: Temple of Radon

Re: Recent acquistions & restoration projects.....

Postby DeBruin » Mon Nov 11, 2013 8:48 pm

Really neat car Phil, nice trussrods, appears to be a Huff n Puff or Mainline models cars?
Perhaps Rufus can weigh in?
Pete

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Fri Nov 15, 2013 9:39 am

DeBruin wrote:Really neat car Phil, nice trussrods, appears to be a Huff n Puff or Mainline models cars?
Perhaps Rufus can weigh in?
Pete


Does look like a Huff 'n' Puff car; may also really be an On3 car as well. Not currently in production if it is either.

But the underbody is a good bit better than a standard Huff 'n' Puff which are usually pretty minimal and this has the flooring nicely visible, although I can't say much for the way that the truss rods are installed.....
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: Recent acquistions & restoration projects.....

Postby rex desilets » Fri Nov 15, 2013 11:51 am

3-rail trucks. That's why the unfortunate truss rod arrangement
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Fri Nov 15, 2013 12:40 pm

rex desilets wrote:3-rail trucks. That's why the unfortunate truss rod arrangement


Not what I was referring to at all. What I was referring to was that they should have been run out to the ends of the car and that can be done regardless of 3-rail trucks with just a little care and the right size queen posts.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Sun Feb 09, 2014 4:37 pm

Picked this interestingly lettered freight trailer up at Timonium last Sat. Car Works resin kit car....

Image

Image

Image

But it suffers from "naked underbody syndrome", :( Please don't let this happen to your cars. Install an underbody and don't let your rolling stock go out with a naked underbody in public, :mrgreen:

Image

And, those trucks will just have to go!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Recent acquistions & restoration projects.....

Postby rogruth » Sun Feb 09, 2014 4:42 pm

Rufus,

What is that coupler?
An interurban or street car type?

Pretty color scheme and I agree with the underbody comments.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Sun Feb 09, 2014 5:06 pm

rogruth wrote:Rufus,

What is that coupler?
An interurban or street car type?


Radial coupler for going around street corners -- yes, interurban freight car.

Pretty color scheme and I agree with the underbody comments.


It was hard to resist, and installing an underbody will not be a hard exercise.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
big bad jim
Posts: 446
Joined: Wed Oct 06, 2010 1:38 pm

Re: Recent acquistions & restoration projects.....

Postby big bad jim » Mon Feb 10, 2014 11:52 pm

The Turtle Creek Central was a Model Railroader project layout I believe. Something on the order of a 4x8.

Jim

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Sun Feb 23, 2014 10:47 am

Another little gem from the Timonium show.....

Image

Image

Image

Image

Normally not quite what I would buy being a metal car, but it's got insulated an Q-car drive under it that makes it possible for m to run this while I lollygag around putting up overhead wire.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: Recent acquistions & restoration projects.....

Postby J. S. Bach » Sun Feb 23, 2014 1:31 pm

Rufus T. Firefly wrote: ...snip...
Image
...snip...
And, those trucks will just have to go!


Maybe your TURTLE and my RAT:
Image

need to get together; maybe on LIONel track?? :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :roll: :mrgreen:

Seriously, I would be willing to trade the trucks (less wheelsets) for your Andrews (less wheelsets, of course) the next time that we meet up.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Recent acquistions & restoration projects.....

Postby bob turner » Sun Feb 23, 2014 11:05 pm

The STC freight motor is truly nice. You say it is all metal? I used to see these kinds of things in Baltimore.

The iPad often launches where I don't want it to - the first page of this thread is truly worthwhile. I had forgotten how nice that PV box is.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 30 guests