Recent acquisitions & restoration projects.....

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Mon May 26, 2014 12:05 pm

DeBruin wrote:Neat shorties Rufus, are these Sierra RR ? or some such western road prototype or total free-lance?
To me they're just begging for some spindly drivered 4-4-0 or mogul, with a head end box car or two.


Yeah - charming! Walthers?


Yes, the old Walthers Sierra kit cars. While they might look good behind a 4-4-0, they do suffer from being rather heavy what with cast ends, underbody bits, and full of cast seats and other details. Metal sides under the scribed cardstock that these kits used as well. My Sierra 2-8-0 just barely moves 3 such cars about before filing complaints....

...the Smokey Pokey...


I'll pass, but you go right along with that road name, :wink: :mrgreen: Yellow and other brightly colored cars were not uncommon pre-1900. The one that I would love to see SMR import would be a PRR Yellow Kid train. Bright yellow, green and red cars.........thought about and may yet someday just build a bunch of LaBelle cars to put that color scheme on them.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Recent acquistions & restoration projects.....

Postby webenda » Mon May 26, 2014 4:37 pm

Rufus T. Firefly wrote: Yellow and other brightly colored cars were not uncommon pre-1900. The one that I would love to see SMR import would be a PRR Yellow Kid train. Bright yellow, green and red cars.........thought about and may yet someday just build a bunch of LaBelle cars to put that color scheme on them.


It is good that you know what colors to use. Out here in the west tuscan red seemed to be popular, but I see D&RG used several colors on passenger equipment; yellow ochre, tuscan red and dark green.

Early photographic plates and films were usefully sensitive only to blue, violet and ultraviolet light. As a result, the relative tonal values in a scene registered roughly as they would appear if viewed through a piece of deep blue glass. Blue skies with interesting cloud formations photographed as a white blank. Any detail visible in masses of green foliage was due mainly to the colorless surface gloss. Bright yellows and reds appeared nearly black.

So a photograph from the era is worthless for guessing what color the cars were. Either railroad records or digging down through layers of paint on an existing car are about the only clues we have.



As a result, these D&RG colors all appear black in photographs of the era.

1880 yellow ochre
1887 tuscan red
1901 dark green

What color is this mail/baggage car?
Attachments
Denver and Rio Grande 1880 Baggage Mail Car.jpg
What color is this Baggage/Mail car?
Denver and Rio Grande 1880 Baggage Mail Car.jpg (202.89 KiB) Viewed 7114 times
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

DeBruin
Posts: 892
Joined: Sat Aug 07, 2010 1:05 pm
Location: Temple of Radon

Re: Recent acquistions & restoration projects.....

Postby DeBruin » Mon May 26, 2014 9:43 pm

Wayne that bobber-baggage is soooo over the top, can you imagine how the Grande had to deal with something like that in their trains? Say it was in a freight train of... ore cars each with two twin axle trucks, this has to ride on the end right? would it have sufficient weight to track as a head end car in a passenger train consist?
Amazing photo.
Thanks for posting, still learning something new very day
Pete

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Recent acquistions & restoration projects.....

Postby webenda » Mon May 26, 2014 10:03 pm

Glad you liked it Pete. There are 2724 old railroad photos here:
http://cdm16397.contentdm.oclc.org/cdm/ ... der/nosort

URL for four-wheel mail and baggage car:
http://cdm16397.contentdm.oclc.org/cdm/ ... 58/rec/150

How about plans for a 35 foot Parlor Sleeping Car from the site.
Railway_Car_Plans_and_Drawings__Shorty_Passenger.jpg
Railway_Car_Plans_and_Drawings__Shorty_Passenger.jpg (17.38 KiB) Viewed 7072 times

Wait... it should be bigger than that, what happened?
Parlor-Sleeping Car.jpg
Parlor-Sleeping Car.jpg (649.81 KiB) Viewed 7060 times

Man, these drawings are high resolution. There is an option to download a large size. I tried it. Large size was ten times wider than my screen. Here is a little piece:
12699x7732px.jpg
Large Size
12699x7732px.jpg (154.64 KiB) Viewed 7057 times
Last edited by webenda on Tue May 27, 2014 12:40 am, edited 1 time in total.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Recent acquistions & restoration projects.....

Postby bob turner » Mon May 26, 2014 11:23 pm

Yellow was quite common. In Fairbank, Ariz, some of the section hands lived in older wooden coaches that had been set on the ground. They were yellow with green roofs. The heavyweight Pullman cars used for transient workers were a mineral red, much like the freight cars that had been converted to houses.

While I am not a great fan of the Durango and Silverton, I love their rolling stock - yellow-orange, with black trim and silver roofs. I hope someday the Cumbres and Toltec can have coaches as good looking - I love the C&T!

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Tue May 27, 2014 7:40 am

webenda wrote:How about plans for a 35 foot Parlor Sleeping Car from the site.


Neat car, Wayne. Early closed vesibule car with spiral stair entrances for men and women at each end. Looks like section fold away to open up portions in the parlor. Have to save this one for a possible future conversion of one a Walthers Sierra car into something more "interesting". I have an unbuilt combine kit that would serve as a starting point; have to make new sides and clsoe in the platforms......
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Wed May 28, 2014 9:01 am

Idles hands..........

Taking measurements from the restored car, I cudgeled together the beginnings of a base....some of my resin bolsters, and added a train line.....platform parts are actually bit of siding that's scribed on both sides - inside is single side scribed since I'm not bothering with an interior.......well, then again maybe I will put something in the door area......and maybe not use razor blades for the door runners......

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Wed May 28, 2014 6:59 pm

One side with the windows in....

Image

and 2 ends on with the doors...

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: Recent acquistions & restoration projects.....

Postby R.K. Maroon » Wed May 28, 2014 8:14 pm

Thanks for posting those photos, Martin. I have it on my list to build a bay-window wood caboose, and it's really helpful to see how others do it. A photo of just the completed model does not reveal as much information. I will snag photos and save!
The link below any photo will display the image full size

User avatar
John Webster
Posts: 839
Joined: Sat Feb 05, 2011 4:29 am
Location: Painesville, Ohio

Re: Recent acquistions & restoration projects.....

Postby John Webster » Wed May 28, 2014 8:36 pm

About 15-20 years ago Westerfield made a resin kit for the Yellow Kid in HO. I believe it was 6 cars. If it is the same quality as their 1893 Pullman Chicago Exposition set it includes cast resin interiors, decals, curtains and soft metal truck kits along with the impenetrably exhaustive instruction sheet.
You begin flying with a full bag of luck and an empty bag for experience. The object is to fill the bag of experience before you empty the bag of luck.

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Wed May 28, 2014 8:53 pm

John Webster wrote:About 15-20 years ago Westerfield made a resin kit for the Yellow Kid in HO. I believe it was 6 cars. If it is the same quality as their 1893 Pullman Chicago Exposition set it includes cast resin interiors, decals, curtains and soft metal truck kits along with the impenetrably exhaustive instruction sheet.


Yes! 2 of those sets were on eBay this year starting ~$300. I was tempted.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Wed May 28, 2014 8:56 pm

R.K. Maroon wrote:Thanks for posting those photos, Martin. I have it on my list to build a bay-window wood caboose, and it's really helpful to see how others do it. A photo of just the completed model does not reveal as much information. I will snag photos and save!



Here's one that I did quite a few years ago that has traveled about and returned home.

Image

Here's something similar for the prototype.

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Fri May 30, 2014 7:58 am

Back to the copy....

Pretty much assembled the basic shell and put a coat of primer on it so I could glaze the windows, set the steps, get the roof on.....

Image

Image

Made the doors up similar to the original but used some 0.010 brass instead of cutting up razor blades....added a few extra boards, too. There's just enough flex in the doors to make then removable sliding over above the window and still slide in that small wood channel at the bottom.

Image

On to installing the underbody stuff - got to minimize "naked underbody" syndrome......
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: Recent acquistions & restoration projects.....

Postby R.K. Maroon » Fri May 30, 2014 1:27 pm

Martin, is that roof self-supporting (meaning can you lift it off of the body in one piece)? It seems that the break-line where the sloped halves of the roof transition to the flat roof-walk area would be a hinge point and structurally problematic. Reinforced on the bottom side?
The link below any photo will display the image full size

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Fri May 30, 2014 8:47 pm

R.K. Maroon wrote:Martin, is that roof self-supporting (meaning can you lift it off of the body in one piece)? It seems that the break-line where the sloped halves of the roof transition to the flat roof-walk area would be a hinge point and structurally problematic. Reinforced on the bottom side?


Nope. That roof is not going anywhere. In fact, the overhand from roof provides a slot for the upper track for the brass appended to the back of the doors to slide open.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Google [Bot] and 30 guests