Recent acquisitions & restoration projects.....

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42238
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Mon Jun 16, 2014 7:55 am

Next up off the top of the pile of "goodies".......looks to be a Huff 'n' Puff car or something of that ilk.

Was not too bad looking until it arrived and the the roof came off and then the sides starting to fall off......

Image

Image

Got a bit of weight added! Date on the inside is from 1965. Doors on each side open in different directions. No ladders at the one end, no end walks on the roof, could use grab irons, etc. Some other "stuff".... Underbody has an AB system that's partially plumbed out. Came with Monarch(?) couplers that are going away, but also came with all metal Athearn archbar trucks and those will stay.

!st order of business is to stabilize the structure and then get the roof back on - all the trim letterboards are loose so "adjustments" are possible.

Have to look in my dry transfer storage to see if I have something "interesting" to put on this car, too.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42238
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Thu Jun 19, 2014 10:10 am

Skip to the end on this one......

Image

Image

Image

Do like using those dry transfers! :D
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42238
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Thu Jun 19, 2014 7:27 pm

Next up on the hit parade is a stock car. I have maybe 3 stock cars total.....might be a keeper. Looks to be maybe another Huff 'n' Puff car. Doors are a mess and the roof needs to be re-worked, but that bright yellow is pretty decent. Kadee couplers and a pair of Bettandorf trucks to trade away.....

Image[/URL]
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42238
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Fri Jul 04, 2014 11:23 am

Well, another one done....

Image

Image

Image

New roof, rebuilt doors and tracks, and some paint here & there. And, a bit of weight inside to go with the metal Archbar trucks to get this car some tracking weight.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

DeBruin
Posts: 892
Joined: Sat Aug 07, 2010 1:05 pm
Location: Temple of Radon

Re: Recent acquistions & restoration projects.....

Postby DeBruin » Fri Jul 04, 2014 1:14 pm

Like these cars Rufous, might be old Mainline Models, Huff n Puff's predecessor; they look great for the period you model.
I have a few kits left from when I sold them at shows; a couple of the NY&HR Solvay coke cars which is essentially a high sided gondola, some of the Hart Hanks ballast cars, some stock cars like this albeit silk screened as NYC and O&SL, and one of two-fer flat car kits. If I can ever get an appropriate locomotive for them I'll build them; they're a lot of fun albeit you have to work past the instructions as the sides don't measure out well to the end plans.

User avatar
webenda
Posts: 15427
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Recent acquistions & restoration projects.....

Postby webenda » Fri Jul 04, 2014 5:12 pm

Rufus T. Firefly wrote:Next up off the top of the pile of "goodies".......looks to be a Huff 'n' Puff car or something of that ilk.

Got a bit of weight added!

Rufus,

I am interested in the weights, can you expand on material, source, how much weight?

I agree with DeBruin, nice looking cars, I like.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
Rufus T. Firefly
Posts: 42238
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Fri Jul 04, 2014 6:05 pm

webenda wrote:
Rufus T. Firefly wrote:Next up off the top of the pile of "goodies".......looks to be a Huff 'n' Puff car or something of that ilk.

Got a bit of weight added!

Rufus,

I am interested in the weights, can you expand on material, source, how much weight?

I agree with DeBruin, nice looking cars, I like.


2mm sheet lead on the floor so it's not really very visible; I got a roll of it a few years back from one of the scientific supply houses - not sure which one, but I can look into that on Mon. Just enough to give the car a bit of heft, and after adding metal trucks, probably close enough to NMRA weighting to make it behave.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
webenda
Posts: 15427
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Recent acquistions & restoration projects.....

Postby webenda » Fri Jul 04, 2014 8:16 pm

Rufus,

Fully adequate description of your weights, thank you. Lead sheet is still available from roofing material suppliers.

I found an infinite source of lead here in Tucson. Old lead weights intended for steel wheels won't stay on alloy wheels because the clips do not match alloy wheel profiles. Apparently a lot of tire stores in Tucson don't know weights are made to match the wheel, so these weights line the highways around here. A one hour bicycle ride nets about 8 ounces of lead.

Lead.jpg
Lead.jpg (187.74 KiB) Viewed 5963 times


Most if these are lead, but I see a couple of steel weights. They are easy to separate by the drop test; Lead = "Thud," Zinc = "Clink," and Steel = "Ring."
The lead melts easily with a propane torch. I made a lead cube, don't see why I could not make a lead sheet by pouring it on a cookie sheet.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Recent acquistions & restoration projects.....

Postby rogruth » Fri Jul 04, 2014 8:47 pm

That should work. :D
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: Recent acquistions & restoration projects.....

Postby sarge » Fri Jul 04, 2014 8:47 pm

For anyone that wants to use tire weights:

Be a bit careful of old tire weights, for they can have a liberal coating of brake-shoe dust on them. No biggy until you melt them and get a snort of the vapour by accident, for some of those brake shoe compositions can be something you might not want to inhale.

Easy solution is wash them well first before melting and don't breathe the vapour.

And now, back to the practical world without Health and Safety notices. :D

User avatar
webenda
Posts: 15427
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Recent acquistions & restoration projects.....

Postby webenda » Fri Jul 04, 2014 9:36 pm

Thank you Sarge, for the safety tip. :D I noticed they are all grimy, but did not think about brake dust. :( Next melt I will wash them first.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Recent acquistions & restoration projects.....

Postby ScaleCraft » Sat Jul 05, 2014 5:40 pm

Unless they're growing, those weight should be fine. Hasn't been any asbestos in brakes for a long, long time.
Dave....gone by invitation

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: Recent acquistions & restoration projects.....

Postby sarge » Sat Jul 05, 2014 6:32 pm

Asbestos is not the only thing to worry you here. Inhalation of any brake-dust should be avoided, just for being very fine and abrasive for starters. Mix in the notion that pads have heat dissipating compounds to reduce fade such as Kevlar and various petro-chem materials, and quite a few systems today use ceramics and ceramic composite materials, a good washing up of those weights is a minor step well worth it for the peace of mind if nothing else.

Unless of course you trust the materials of today to be benign like folks trusted asbestos, mercury, and spun fibreglass fifty years ago. :D :D

It can't hurt to take a little time and wash 'em up.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Recent acquistions & restoration projects.....

Postby ScaleCraft » Sat Jul 05, 2014 7:10 pm

Nope. Just know how bad asbestos containing pads are. If you're finding road kill along the side of the road.....any rain, ever, they've been washed of any dust particulates.
The big issue is just the lead itself...talk about being benign like folks trusted asbestos, mercury, and spun fibreglass fifty years ago.
Heat 'em up, decant the real lead off, pull the clips out with a wire hook and wear your breathing apparatus, asbestos gloves...all that stuff.

Cast your weights and bullets.
Then remember...they've changed the compound of tyre weights.
The environmental folks think some eagle is going to ingest a loose tyre weight and develop some genetic disorder.
So, now, they aren't lead any more.
They don't bend if you run over a loose one...they puncture the tyre.

BIG problem in some areas.

So, now you have benign tyre weights that kill tyres.

http://www.epa.gov/osw/hazard/wastemin/nlfwwi.htm
Dave....gone by invitation

User avatar
John Webster
Posts: 839
Joined: Sat Feb 05, 2011 4:29 am
Location: Painesville, Ohio

Re: Recent acquistions & restoration projects.....

Postby John Webster » Sun Jul 06, 2014 12:07 am

I really like that Union Line box car.

Where do you get metal Athearn archbar trucks?
You begin flying with a full bag of luck and an empty bag for experience. The object is to fill the bag of experience before you empty the bag of luck.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 48 guests