A few CVRR pictures and some other related pictures....

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Thu Aug 13, 2015 6:40 pm

J. S. Bach wrote:
MurphOnMillerAve wrote:It's amazing, to me, to realize things like that were all built by hand (!) I suppose one could say the whole country was made by hand in those times.


I always think that both ends of Man's creations (George Washington Bridge, Little Boy and Fat Man for ex.) that were built entirely without computers (at least as we know them today) shows something about Man's brain power.


The ability to build, to actually just build much of anything by one's self being lost or at least declining.

I was fortunate to be schooled by a Grandfather that taught me how to use just about any tool and how to do electrical, plumbing, roofing, wood flooring, basic construction, how to square logs by hand, how to cut stone, etc. Not advocating that such skills are needed by all, but folks should know how to go over to Home Depot, buy a toilet repair kit for $14.99, and replce all of the innards of a toilet tank that's leaking instead of calling a plumber and paying $160.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Mitch
Posts: 5215
Joined: Sat May 28, 2005 2:06 pm
Location: Freeport, Pa.

Re: A few CVRR pictures and some other related pictures....

Postby Mitch » Thu Aug 13, 2015 9:10 pm

Know what, Rufus? I think this is the second time in just a couple of days that you've mentioned post and beam construction or squaring a log. I've always been a fan of Timberframing, and I've dabbled in it myself. But, I cheat like hell! :lol: I use the radial arm saw with a dado blade to cut tenons, and I made up wooden jigs and use a router to cut the shoulder where another beam or a brace will penetrate a vertical beam. In other words, if the beam is roughly 6" square, and I want a 3/4" shoulder, I machine out the wood with all measurements made from the opposite side. And that basically is what the old timers did. A beam could be 8 1/2" on one end, but only 7/3/4" on the other end, and not square at all, so you use one end or side, and all measurements are taken from that side. A beam placed longways on 3 bents would be mortised and the upright of the bent would have the tenon, so if you were going to set rafters into the beam, (let's say a 12 x 12 pitch, (45 degree angle)) here's another place where I cheat. I made plywood jigs cut at a 45 degree angle, rout out a hole in them where the router bit can protrude through, then I anchor it to the top post and keep going around inside the hole with a plunge router and 5/8" x 2 1/2" straight cut bit. It puts a perfect step into the beam for the tail of the rafter, then another jig is positioned directly over the same place, and I cut in a step for the rafter to sit on. (we're talkin' a 4" x 6" x ? rafter). Then the holes would be drilled for the pegs, up to 1/4" offset, so that when the peg is driven in, it's pullin' the rafter hard and tight into the offsets. You only need one peg, or a single 30 penny spike, and that baby's never comin' out of there. Later this year, when I get the basement cleaned up of all my kid's junk, I'll take some pics of some of my crafting and show ya. But I can tell you this. Post and beam construction is really slow work in a one man operation.
If you agree with the Progressives, it's freedom of speech. If you disagree, it's hate speech. There are no alternatives.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: A few CVRR pictures and some other related pictures....

Postby rogruth » Thu Aug 13, 2015 9:33 pm

Mitch,

Sounds like what my grandfather would have done if he had power tools. :D :D
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: A few CVRR pictures and some other related pictures....

Postby robert. » Thu Aug 13, 2015 9:52 pm

but folks should know how to go over to Home Depot, buy a toilet repair kit for $14.99, and replace all of the innards of a toilet tank that's leaking instead of calling a plumber and paying $160.[/quote]
8th grade Unami junior high. All students had to complete these tasks. you had to re wire a lamp,sew a zipper into 2 pieces of fabric, make a tee shirt,sew on buttons, knit a pot holder, fix a toilet flusher/fill replace a door knob and lock, make a cookie cutter, and a square butcher block.
I spend entirely too many hours a day tying my shoes

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: A few CVRR pictures and some other related pictures....

Postby rogruth » Thu Aug 13, 2015 10:53 pm

Good start.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Fri Aug 14, 2015 7:43 am

Mitch wrote:Later this year, when I get the basement cleaned up of all my kid's junk, I'll take some pics of some of my crafting and show ya. But I can tell you this. Post and beam construction is really slow work in a one man operation.


Look forward to seeing it! May be slow, but it's also something that comes with a tangible sense of accomplishment and knowing it was done right. My grandfather taught me to use a broad axe for squaring a log (black locust :roll: ) and his axe was left-handed which made it a real knuckle-buster. We used to go to farm auctions and he got me to buy a mortising axe. Both are hanging on the wall in my shop next to the frow.

I'm a fan of through tenon and peg joinery and used to use it on furniture - simplified Stickley style stuff - if I could get good 1/4 sawn oak that did not require robbing Wa-wa's to finance, I'd go back to making furniture again. I'd like to get another 8" dove-tailing saw but looking at what a decent Disston straight back sells for is painful. I'll probably start to sell off the older tools that I never use like that Stanley #55 with the boxes of cutters......

Just got done re-caning another chair. Re-done the entire kitchen set that was my parent's and now I've got cane soaking for one of the old bentwood chairs from the set that I bought for my wife when we got married.

you had to re wire a lamp,sew a zipper into 2 pieces of fabric, make a tee shirt,sew on buttons, knit a pot holder, fix a toilet flusher/fill replace a door knob and lock, make a cookie cutter, and a square butcher block.


Yes, a start. Add making a knife for that butcher block, :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Fri Aug 14, 2015 10:18 am

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Sat Aug 15, 2015 10:46 am

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Sun Aug 16, 2015 9:46 am

Back to Berkeley Springs..............

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: A few CVRR pictures and some other related pictures....

Postby J. S. Bach » Sun Aug 16, 2015 8:06 pm

Rufus T. Firefly wrote:Image


Extend that portico out by about twenty feet and one would have the makings of a neat old gas station.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Mon Aug 17, 2015 7:23 am

Up to Huntingdon.......Blair Park

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Tue Aug 18, 2015 7:27 am

To Shirleysburg for a couple.....

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Wed Aug 19, 2015 12:58 pm

The Aughwick Mills "Cracked Nine" Baseball Team from Shirleysburg...........

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Thu Aug 20, 2015 7:29 am

Through the narrows at Shade Gap....

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42240
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: A few CVRR pictures and some other related pictures....

Postby Rufus T. Firefly » Fri Aug 21, 2015 8:26 am

The big town of Neelyton!

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: No registered users and 166 guests