Walther 9175 Coach?
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Walther 9175 Coach?
Thanks Tom, that sounds easy enough.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
-
Tom Dempsey
- Posts: 1002
- Joined: Mon Dec 23, 2013 10:15 pm
Re: Walther 9175 Coach?
Nov/Dec 05 O Scale Trains pages 30 and 31 have pictures, it's were I picked up the idea Bob. You can download the magazine free from their website, the article as a whole is pretty good actually.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Walther 9175 Coach?
Thanks again, already got them downloaded!
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
- Rufus T. Firefly
- Posts: 42237
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Walther 9175 Coach?
Seaboard Air Line Fan wrote:How do you guys make your roofs removable?
My next column in OST will relate one option,
Mind you, it requires competency with a Dremel cut off disc, a drill, and a screwdriver, and requires a flange washer and a 3" deck screw.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Walther 9175 Coach?
Can't wait to see what you come up with 
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Walther 9175 Coach?
Mr. Delbridge, I have used just about every which way to attach a roof . it all depends on the roof blank itself. On the celestory blanks from NE
scale supply A block glued in the right spot and Rufus's deck screws work perfect. Those blanks have a very small engagement with the sides.
The walthers roof blanks have a 5/32" side engagement so they will stay on quite well if you sneek up on the fit and keep it tight. Marking all parts during assembly to keep everything in consistent orientation is a must. On the walthers blanks both celestory and streamlined I have used the tight fit and stolen from Lefty Gateman dress maker snaps to securely hold the piece. Even used them as the electrical connections for the Leds
a dab of dielectric grease from time to time insures continuity. I have only done this once on a solarium buffet sleeper which I sold.
I have seven to ten removable roof kits just laying around glad to send you one if you want it. Heres a pic of the two reshopped cars I did. bought junk of ebay for 19.00. The cast seats alone make each weigh 6/7 pounds.
scale supply A block glued in the right spot and Rufus's deck screws work perfect. Those blanks have a very small engagement with the sides.
The walthers roof blanks have a 5/32" side engagement so they will stay on quite well if you sneek up on the fit and keep it tight. Marking all parts during assembly to keep everything in consistent orientation is a must. On the walthers blanks both celestory and streamlined I have used the tight fit and stolen from Lefty Gateman dress maker snaps to securely hold the piece. Even used them as the electrical connections for the Leds
a dab of dielectric grease from time to time insures continuity. I have only done this once on a solarium buffet sleeper which I sold.
I have seven to ten removable roof kits just laying around glad to send you one if you want it. Heres a pic of the two reshopped cars I did. bought junk of ebay for 19.00. The cast seats alone make each weigh 6/7 pounds.
- Attachments
-
- terrys stuff 438.JPG (1.65 MiB) Viewed 6358 times
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Walther 9175 Coach?
Thanks Terry!
Wow! Must be cast from lead. My aluminum OK Engines cars with plastic interiors and floors only weigh about 2 lbs.
The cast seats alone make each weigh 6/7 pounds.
Wow! Must be cast from lead. My aluminum OK Engines cars with plastic interiors and floors only weigh about 2 lbs.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
- Rufus T. Firefly
- Posts: 42237
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Walther 9175 Coach?
Seaboard Air Line Fan wrote:Thanks Terry!The cast seats alone make each weigh 6/7 pounds.
Wow! Must be cast from lead. My aluminum OK Engines cars with plastic interiors and floors only weigh about 2 lbs.
Those castings are primarily a lead based alloy and those interiors add up fast on weight. Plastic versions were available at one time....and I think resin ones are not out of reach.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Walther 9175 Coach?
or wood. Some of my cars have wood seats...no idea where they came from.
Dave....gone by invitation
- Rufus T. Firefly
- Posts: 42237
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Walther 9175 Coach?
ScaleCraft wrote:or wood. Some of my cars have wood seats...no idea where they came from.
Some of the Walthers interior sets provided wood seats; milled molding cut to length.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Walther 9175 Coach?
All kinds of useable wood shapes in the trim department just need to use the polyurethane sanding sealer before paint.
Wesport models has way more than what is listed on his website and very light too. I used them on the parlor car Eaton. He now has Pullman heavyweight sections available both day and made up for night. Call him. Nice guy
I have found if the roof is not easily removable then you can skip unseen details.
I built The City Of York entirely from Strathmore, wood, paper, and it even has Lexan windows.
Wesport models has way more than what is listed on his website and very light too. I used them on the parlor car Eaton. He now has Pullman heavyweight sections available both day and made up for night. Call him. Nice guy
I have found if the roof is not easily removable then you can skip unseen details.
I built The City Of York entirely from Strathmore, wood, paper, and it even has Lexan windows.
- Attachments
-
- Belle Haven interior finished
- SDC11580.JPG (1.66 MiB) Viewed 6347 times
-
- Wood with delta models seats
- cascade Interior 004.JPG (433.42 KiB) Viewed 6347 times
-
- All scratch
- City Of build photos #2 003.JPG (1.63 MiB) Viewed 6347 times
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Walther 9175 Coach?
Pulling the roof off seems to be the correct thing. I have an All-Nation Observation car that after I built it decided to put an interior in it. I was able to pry one of the sides off without totally screwing it up, but how many times will that happen.
With ALL the snow we had today I decided to put aside my builds in favor of clearing out the other 2/3 of the upstairs space so I can rebuild my layout into a 2-rail all around the room deal. I'm packing the Sarah Coventry jewelry my wife collected from the plastic drawers she had it in to ziploc bags placed in a large plastic container. So far I've packed pieces labeled A-D, going from approx 17 cu.ft. down to less than 3 cu.ft. She had a LARGE spreadsheet (with 1400+ pages, most are blank) which I've left intact, and I'm taking only the good data (as I bag each set of jewelry) and putting it into a new spreadsheet that will take a lot less memory. So far I've used almost 200 bags
I pity the fool who ends up having to deal with this and MY hobbies I've had over the years.
With ALL the snow we had today I decided to put aside my builds in favor of clearing out the other 2/3 of the upstairs space so I can rebuild my layout into a 2-rail all around the room deal. I'm packing the Sarah Coventry jewelry my wife collected from the plastic drawers she had it in to ziploc bags placed in a large plastic container. So far I've packed pieces labeled A-D, going from approx 17 cu.ft. down to less than 3 cu.ft. She had a LARGE spreadsheet (with 1400+ pages, most are blank) which I've left intact, and I'm taking only the good data (as I bag each set of jewelry) and putting it into a new spreadsheet that will take a lot less memory. So far I've used almost 200 bags
I pity the fool who ends up having to deal with this and MY hobbies I've had over the years.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Walther 9175 Coach?
Seaboard Air Line Fan wrote:
I pity the fool who ends up having to deal with this and MY hobbies I've had over the years.
They will probably muse over our "quaint artifacts" and how primitive they are as they teleport it all
to the nearest rufuse dump (if they do not vaporize it on the spot!)....
Take care,
Wolfgang
Wolfgang
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Walther 9175 Coach?
That is what I expect. Just before the dumpster, I will have a couple of easy options for my executor/trustee. Call these phone numbers, and have them bring a truck. I will check with the Calif RR museum about my cab forwards, but I bet they are not going to be interested except in resale value.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Walther 9175 Coach?
I've got 1/3 of the garage floor covered in 1/6 scale vehicles (tanks, half tracks, jeeps, motorcycles) I built and bought. Probably good for target practice more than anything else. Most are too big to display in the house as a group, however some individual vehicles take little room. That's not counting the 300+ 1/6 soldiers I accumulated
those are stored inside under the train layout.
Sure was cool when I was in the hobby though and learned a lot about WWII that I didn't already know.
Sure was cool when I was in the hobby though and learned a lot about WWII that I didn't already know.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 51 guests