Good Buy for a SF modeler

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
up148
Posts: 4792
Joined: Sat Nov 01, 2008 11:52 am

Good Buy for a SF modeler

Postby up148 » Mon Jun 19, 2017 11:42 am

The following link is for an A/B set of OMI F-3's that are repowered by Doug Cockerham. If you are a SF modeler it's really a good buy IMHO, because the repower is almost worth the cost and nicely painted OMI F-3's are pretty close to worth the starting price in stock form. So combine the two and you have a nice opportunity to pick up a set of F-3's that should run forever. I know Doug's drives are old school now and not as quiet as Jay's or others, but they are as bullet-proof as any drive on the planet. Opinion.

There's also a SF E9B (I believe) that is very nice as only $650. Both good prices IMHO.

http://www.ebay.com/itm/OMI-ATSF-A-B-F- ... SwnHZYdC9B

Interesting, I believe these items are coming from the estate of the lady modeler (can't remember her name, but recognize the EB sellers name) who used to frequent the ATLAS forum and some others. She passed away I was told several years ago. I think see was an elevator repair person and fell and had some back problems. It seemed to be all downhill from there for her.

BH

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: Good Buy for a SF modeler

Postby R.K. Maroon » Mon Jun 19, 2017 12:14 pm

For what it's worth, I have been buying from this seller off and on for about seven years. Every model I have bought from him is first rate -- nicely finished, runs out of the box. He told me stories of an old swap meet that used to be held on some fair grounds somewhere in Los Angeles, under the grandstands of some stadium.

Jim
The link below any photo will display the image full size

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Good Buy for a SF modeler

Postby E7 » Mon Jun 19, 2017 1:08 pm

up148 wrote:Interesting, I believe these items are coming from the estate of the lady modeler (can't remember her name, but recognize the EB sellers name) who used to frequent the ATLAS forum and some others. She passed away I was told several years ago. I think see was an elevator repair person and fell and had some back problems. It seemed to be all downhill from there for her. BH


Don't know if this stuff belonged to her, but the lady you mention was Lisa Marie T., out of Utah as I recall. Posted on 3rd Rail (until it was shut down) and OGR. Seemed to be a nice person, but as Butch says, a lot of health issues.

Seller used to post here way back. I have bought an item or two from him years ago, and he is a straight shooter/nice fellow.

Rich

up148
Posts: 4792
Joined: Sat Nov 01, 2008 11:52 am

Re: Good Buy for a SF modeler

Postby up148 » Mon Jun 19, 2017 1:18 pm

That's her Rich, but I could have her and this seller's ID confused, as I do that. :( :( :( :( I remember buying some things from Lisa a decade ago and thought she used the same seller ID as this current listing.

BH

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Good Buy for a SF modeler

Postby E7 » Mon Jun 19, 2017 1:51 pm

up148 wrote:That's her Rich, but I could have her and this seller's ID confused, as I do that. :( :( :( :( I remember buying some things from Lisa a decade ago and thought she used the same seller ID as this current listing. BH


Butch, Seller is definitely a gent from CA (note Anaheim on the listing). Tino = Florentino. I'd bet Bob and Jay know him. Haven't noticed him selling much lately, but I don't look all the time, and you can never see it all. I would not be afraid to buy from him, good guy.

I have no idea what Lisa Marie's Bay ID might have been. She was a pretty prolific poster on the forums and all of a sudden dropped out of sight. Wasn't too hard to figure what happened considering her health issues. Sad....seemed to be a genuinely nice person.

It's H*ll getting old! :mrgreen: :lol: :lol: :lol: :lol:

Old Rich

up148
Posts: 4792
Joined: Sat Nov 01, 2008 11:52 am

Re: Good Buy for a SF modeler

Postby up148 » Mon Jun 19, 2017 2:00 pm

I have no idea what Lisa Marie's Bay ID might have been. She was a pretty prolific poster on the forums and all of a sudden dropped out of sight. Wasn't too hard to figure what happened considering her health issues. Sad....seemed to be a genuinely nice person.

It's H*ll getting old! :mrgreen: :lol: :lol: :lol: :lol:

Old Rich[/quote]

I resemble that remark. :D :D :D :D Put some muck mats in our pond this weekend and I'm still hurting. Damn near killed me. :lol: :lol: :lol: :lol:

BH

stephen neill
Posts: 151
Joined: Thu Jun 23, 2016 6:16 pm

Re: Good Buy for a SF modeler

Postby stephen neill » Mon Jun 19, 2017 2:52 pm

It is Tino. Yes, Jay and I and others know him. He is a good guy that sells good stuff. He had signed up for OSW but wasn't there. I remember Lisa Marie, but I strongly remember, maybe wrong, that she was from the Chicago area, maybe she moved or maybe I am just wrong.

The SF diesels are nice, I intend to bid.

Steve

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Good Buy for a SF modeler

Postby E7 » Mon Jun 19, 2017 3:23 pm

Butch,

Sent you a private message.

Rich

User avatar
Mitch
Posts: 5215
Joined: Sat May 28, 2005 2:06 pm
Location: Freeport, Pa.

Re: Good Buy for a SF modeler

Postby Mitch » Mon Jun 19, 2017 8:34 pm

I remember Lisa Marie, but I thought she was from the Truckee area on the old SP (UP) line. I recall she two railed locomotives that weren't available as two rail engines. And yep, it sucks to get old. :lol:
If you agree with the Progressives, it's freedom of speech. If you disagree, it's hate speech. There are no alternatives.

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Good Buy for a SF modeler

Postby bob turner » Mon Jun 19, 2017 8:57 pm

She installed a Ford engine in a Toyota pickup. She was building an aircraft. I was thinking Salt Lake.

up148
Posts: 4792
Joined: Sat Nov 01, 2008 11:52 am

Re: Good Buy for a SF modeler

Postby up148 » Mon Jun 19, 2017 9:03 pm

E7 wrote:Butch,

Sent you a private message.

Rich


Can't find it Rich. :( :(

BH
Last edited by up148 on Tue Jun 20, 2017 9:47 am, edited 1 time in total.

up148
Posts: 4792
Joined: Sat Nov 01, 2008 11:52 am

Re: Good Buy for a SF modeler

Postby up148 » Mon Jun 19, 2017 9:04 pm

bob turner wrote:She installed a Ford engine in a Toyota pickup. She was building an aircraft. I was thinking Salt Lake.


I think that's a bingo Bob. That jogged some old memory cells. She was a very unusual woman in what she enjoyed working on. Never met her and only talked to her once.

BH

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Good Buy for a SF modeler

Postby E7 » Mon Jun 19, 2017 9:22 pm

up148 wrote:
E7 wrote:Butch,

Sent you a private message.

Rich


Can't find it Mitch. :( :(

BH


Butch, Should be at the top right side of the page when you sign on. Will Be: PM 1 (or however many messages you haven't opened.

Rich

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Good Buy for a SF modeler

Postby E7 » Mon Jun 19, 2017 9:27 pm

up148 wrote:
bob turner wrote:She installed a Ford engine in a Toyota pickup. She was building an aircraft. I was thinking Salt Lake.


I think that's a bingo Bob. That jogged some old memory cells. She was a very unusual woman in what she enjoyed working on. Never met her and only talked to her once.

BH


For some reason I think Park City. Indeed, she was into some different stuff for a female.

Rich

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Good Buy for a SF modeler

Postby bob turner » Mon Jun 19, 2017 11:29 pm

Yes. Park City. And at the end she was apparently severely restricted in mobility. Talented. We do not see that many women in the "build stuff" mode. There is Keri-Anne, in New England, who is building a Piper Cub from scratch. She is a superb welder and a true craftsman.

There are now lots of female pilots and engineers, a few airplane mechanics, but very few model train scratchbuilders if any at all.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 66 guests