Hello for those who are interested. I have been asked to come on board as design and project consultant for
for SSM and GGD import projects mainly dealing with the O scale models that they are importing.
I will be working closely with Scott Mann and Jonathan Pieffer as well
I believe Charlie Duckworth from the MPHS was contacted as well.
There most recent import was the MP and T&P E8 A units in the blue and gray, I really anticipated a very nice model
but I have to say I was not happy. When I received it at first looks it comes across as well done. But sadly they missed the mark
on some things by a mile. I can only say it was a lack of research for the prototype this is my opinion only. The models can be fixed
to correct some of the errors, but not all So this is water over the dam and we move forward to another Offerings.
Asking the right people and having the correct data is the key factor here.
So here is the next model In O scale due later this year. There will be the Mopac PA series 2 # 8019-8036 with the Farr grills, which was the second order built 1952. This version has never been done before and is a good one to choose . These will be detailed as delivered.
Later in 2018 we will see the MP E6 AB 7002 -7003 with portholes. Never done before . It is my hope we can see the E3's and the AA 6 # 7100 at a future
date down the road.
Now here is how SS 3rd rail works for 2 rail models. It is by reservation only but the quantities that Scott Mann needs to make it work
is 20 models per railroad or more. If he gets less he will not do it. So If you are interested go to there web site and place a reservation there is no deposit.
I am also helping on the Texas and Pacific 2 10 4 #610-624 I 1 a series Scott already has the correct paint samples in House
Regards
Bill Basden Delta Models http://www.deltamodelsusa.com
Project consultant for SSM 3 rd Rail imports for MP and T&P
Project consultant for SSM 3 rd Rail imports for MP and T&P
Last edited by cole7015 on Tue Jul 04, 2017 12:57 am, edited 1 time in total.
Re: Porject consultant for SSM 3 rd Rail imports for MP and T&P
Last edited by E7 on Tue Jul 04, 2017 2:36 am, edited 1 time in total.
Re: Porject consultant for SSM 3 rd Rail imports for MP and T&P
That's great news Bill.
Scott's website states that the illustrations and photos are for painting purposes only, but all of the images, including MoPac, depict Alco PA1's. Is he doing a PA2 for MoPac only, or are all of them coming in as PA2's?
...gregg
Scott's website states that the illustrations and photos are for painting purposes only, but all of the images, including MoPac, depict Alco PA1's. Is he doing a PA2 for MoPac only, or are all of them coming in as PA2's?
...gregg
- Attachments
-
- alcopamopac.jpg (65.18 KiB) Viewed 3605 times
Re: Porject consultant for SSM 3 rd Rail imports for MP and T&P
Gregg to my knowledge for now the Mopac's will the PA 2's as the photo shows because they have not ever been done this way. Other roads may be different as like PA 1's. I am only consulting on the Mopac version so far.
I think people may read this wrong and think they will all be PA 2's Scott will have to clarify on this. IMHO I think they may be changing course
on How they offer models in the future. They have gotten burned really bad because of what people thought but did not get in the end,
based on photo's verses no photo's and colored line drawings. I know of 3 people with Scott being one to say that as delivered is the way to go.
let the modeler add or remove what they do not want. Most of all there paint is Trucolor so it will match what you get.
The reason I came on board is the way the MOPAC and T&P E 8's came out. I will not comment on the forum, Scott has my list of many errors.
Bill Basden Delta Models www.deltamodelsusa.com
I think people may read this wrong and think they will all be PA 2's Scott will have to clarify on this. IMHO I think they may be changing course
on How they offer models in the future. They have gotten burned really bad because of what people thought but did not get in the end,
based on photo's verses no photo's and colored line drawings. I know of 3 people with Scott being one to say that as delivered is the way to go.
let the modeler add or remove what they do not want. Most of all there paint is Trucolor so it will match what you get.
The reason I came on board is the way the MOPAC and T&P E 8's came out. I will not comment on the forum, Scott has my list of many errors.
Bill Basden Delta Models www.deltamodelsusa.com
Re: Project consultant for SSM 3 rd Rail imports for MP and T&P
Hey Bill,
I sprung for the E8's, even though I was greatly disappointed by the missing roof overhang on both ends of the F7B's delivered last year or the year before. Bottom line, I never removed the shell to examine them before getting rid of them. I can fix or add details, I can modify drives, but I won't spoil a beautiful paint job to add a pointed roof overhang and I don't paint.
Looking at the E8A's I received, one is very nice, but the other has a mold release issue with the center windshield post that looks like similar to a roller coaster, but a roller coaster I hope to be able to fix with some sanding and touch up paint. The nose doesn't look perfect, but E & F unit noses are very subjective when they are close to prototype and I think the pilot might be a little too wide. Can't really put my finger on it but it just looks a little out of sorts. One number boards was glued in with an end sticking out 1/8" so I'll need to address that. I think the biggest issue with any of the SSM/GGD models is quality control. But, when I see how nice the models are overall, Scott has really done a great job.
I removed the shell this morning and am so impressed with the engineering on this model. Last time I looked in a SSM/GGD loco was the E-7's and this model is so superior it's hard to even compare them, but in all fairness the E7 was SSM/GGD's 1st diesel import. Besides the E8's being all wheel pick-up with ball bearing drive and axles, excellent paint and detail, the electronics inside are so clean and user friendly it's amazing. Disconnect two small plugs attached to electronic boards and the shell is easily removed. All the lights are connected to one small board that remains with the shell in the nose, so you have no spaghetti harness like many models have and the GGD E-7's.
Curious, are the problems with your MP units road specific details or something that affected all the models? I'd like to know what I have to correct besides the obvious I've seen so far.
It will be great that Scott has someone with your talents to help him out. The just delivered KEY SP AC's would not be the models they are, without Gary Schrader's input. Good luck!!!!
BH
I sprung for the E8's, even though I was greatly disappointed by the missing roof overhang on both ends of the F7B's delivered last year or the year before. Bottom line, I never removed the shell to examine them before getting rid of them. I can fix or add details, I can modify drives, but I won't spoil a beautiful paint job to add a pointed roof overhang and I don't paint.
Looking at the E8A's I received, one is very nice, but the other has a mold release issue with the center windshield post that looks like similar to a roller coaster, but a roller coaster I hope to be able to fix with some sanding and touch up paint. The nose doesn't look perfect, but E & F unit noses are very subjective when they are close to prototype and I think the pilot might be a little too wide. Can't really put my finger on it but it just looks a little out of sorts. One number boards was glued in with an end sticking out 1/8" so I'll need to address that. I think the biggest issue with any of the SSM/GGD models is quality control. But, when I see how nice the models are overall, Scott has really done a great job.
I removed the shell this morning and am so impressed with the engineering on this model. Last time I looked in a SSM/GGD loco was the E-7's and this model is so superior it's hard to even compare them, but in all fairness the E7 was SSM/GGD's 1st diesel import. Besides the E8's being all wheel pick-up with ball bearing drive and axles, excellent paint and detail, the electronics inside are so clean and user friendly it's amazing. Disconnect two small plugs attached to electronic boards and the shell is easily removed. All the lights are connected to one small board that remains with the shell in the nose, so you have no spaghetti harness like many models have and the GGD E-7's.
Curious, are the problems with your MP units road specific details or something that affected all the models? I'd like to know what I have to correct besides the obvious I've seen so far.
It will be great that Scott has someone with your talents to help him out. The just delivered KEY SP AC's would not be the models they are, without Gary Schrader's input. Good luck!!!!
BH
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 77 guests