Trackwork
-
J. S. Bach
- Posts: 5820
- Joined: Wed May 16, 2007 9:30 pm
Re: Trackwork
Nice. It looks like two different construction methods between the outer and inner tracks. Anyway, I would like to see some pictures of the arch-roofed building on the left. It appeals to me in a ww2 temporary-but-became-permanent sort of way.
Re: Trackwork
Dave
The two inner tracks are hand layed steel rail and the others are just flextrack. The switches are hand made using steel rail so where ever there is a switch I have the steel rail continuing on until it's convenient to transition to flextrack. The tracks in the middle are 6 inches higher also. I like the look of the switch rail to be the same as the rail coming in and going out. The flextrack is used where the transition to the lower level is made. I think when I get it all ballasted the difference will blend together. I can expend some effort here because the whole layout is a straight 27 feet long. I always am resisting the urge to make it bigger.
The large round top building is one I made. All cardstock, I've had it for years. I'm at work now but I will take it and post a photo later.
Allan
The two inner tracks are hand layed steel rail and the others are just flextrack. The switches are hand made using steel rail so where ever there is a switch I have the steel rail continuing on until it's convenient to transition to flextrack. The tracks in the middle are 6 inches higher also. I like the look of the switch rail to be the same as the rail coming in and going out. The flextrack is used where the transition to the lower level is made. I think when I get it all ballasted the difference will blend together. I can expend some effort here because the whole layout is a straight 27 feet long. I always am resisting the urge to make it bigger.
The large round top building is one I made. All cardstock, I've had it for years. I'm at work now but I will take it and post a photo later.
Allan
Re: Trackwork
One more thing. The idea of switch rodding appeals to me and there is room over on the right side for it, to control the 3 switches there. I mean with the tower too. There are some more switches down on the west end that I can't reach as there is no space to run the rodding.
Allen
Allen
-
J. S. Bach
- Posts: 5820
- Joined: Wed May 16, 2007 9:30 pm
Re: Trackwork
aww wrote:Dave The large round top building is one I made. All cardstock, I've had it for years. I'm at work now but I will take it and post a photo later. Allan
Was that a kit? Or was it scratchbuilt out of some form of printed cardstock? I have seen similar buildings throughout the South in smaller towns and they intrigue me. I have seen a few with brick walls and that flat arch roof.
Re: Trackwork
The moss or ivy on the tree trunks is an interesting detail, and like Dave, I find the rounded roof building interesting. A nice overall effort! What kind of equipment do you run?
Rich
Rich
Re: Trackwork
I built this layout after going to last years Chicago show. Decided to start over with a smaller plan, late 60's, early 70's only freight and all diesel. The buildings I already had, all cardstock from a company called Pioneer I think. He sold kits for brick and metal buildings but all these just used the cardstock for what I wanted. Heavy cardstock that I backed up with 1/4" foam board. Recessed all the windows and doors. The foam is just that green stuff that ho people use, sprinkle it on over some yellow glue where ever you want. The trees could use some improvement. I actually have too many buildings for this layout and have used the same buildings for previous layout/s. I will take pictures of the round roof one. It' the crudest one there but looks real.
Thanks all for the tips on screw suppliers.
Allan
Thanks all for the tips on screw suppliers.
Allan
Re: Trackwork
Allan,
I am a fan of what I call minimalist layouts, and from what I see, yours is of that kind. By minimalist, I mean, just the track and scenery directly adjacent. Too much scenery (opinion) tends to detract attention from the track and equipment, which to me, is what it's all about. The late Ed Ruetling was very good at this kind of layout. A lot of the technique I am thinking about is done in dioramas where the foreground is 3 dimensional, and the background is painted.
Rich
I am a fan of what I call minimalist layouts, and from what I see, yours is of that kind. By minimalist, I mean, just the track and scenery directly adjacent. Too much scenery (opinion) tends to detract attention from the track and equipment, which to me, is what it's all about. The late Ed Ruetling was very good at this kind of layout. A lot of the technique I am thinking about is done in dioramas where the foreground is 3 dimensional, and the background is painted.
Rich
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Trackwork
Another bump -- I got to see Allan's nifty little switching layout just before his cancer got him last year. I went to Kansas City this spring with a van to help Janet clean out the basement. As expected, the layout was not readily salvagable but the buildings were. I will post photos of that cool quonset hut as time allows (it's still packed up).
Jim
Jim
The link below any photo will display the image full size
-
J. S. Bach
- Posts: 5820
- Joined: Wed May 16, 2007 9:30 pm
Re: Trackwork
Well, if you ever want to get rid of the Quonset hut.................. Seriously, I eagerly await the photos.
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Trackwork
Dave -- You'll have to get in line behind Big Bad Jim. He remembered it sometime back, asked me what happened to it, and mentioned that if it ever needs a home.....
The link below any photo will display the image full size
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Trackwork
I still have it on my list to get photos of Allan Wehrle's quonset hut posted. I am bumping this as a reminder to myself.
I know that I have mentioned this before, but I will say again that Allan's sparse-but-fun switching layout was not easily salvageable. We stripped it as best we could but it was left to the next owner to demolish (or not) when the house was sold. I do like to tell the story of how he laid track by soldering bare rail to the heads of roofing nails. I find it interesting that he cared enough about the look of the layout to put in a fair number of buildings and building fronts, but didn't seem to care that the track didn't have ties. He was certainly a quirky but entertaining fellow. I do miss him.
Jim
I know that I have mentioned this before, but I will say again that Allan's sparse-but-fun switching layout was not easily salvageable. We stripped it as best we could but it was left to the next owner to demolish (or not) when the house was sold. I do like to tell the story of how he laid track by soldering bare rail to the heads of roofing nails. I find it interesting that he cared enough about the look of the layout to put in a fair number of buildings and building fronts, but didn't seem to care that the track didn't have ties. He was certainly a quirky but entertaining fellow. I do miss him.
Jim
The link below any photo will display the image full size
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Trackwork
We are all quirky. And some of us are drawing ever closer to the same fate, statistically speaking. I am having great fun, but time is going by quickly. Yow!
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 67 guests