Wentzco F units
-
Carey Williams
- Posts: 690
- Joined: Sat Dec 24, 2016 3:10 pm
Wentzco F units
Hello all, here is a post from Steve Neil
Steve was having trouble uploading the photos ... so he emailed them to me to try ... I only received the attached 3 photos ( so far)
Thank you ..
Nice looking engines what years were these produced? Once Atwater / GMC/ All Nation had there F units I assume all competitors faded from view in the F unit world ...
Does anyone have a side by side, top by top , bottom by bottom comparison photos of the Adams vs Wentzco ?
Thank you
Carey
Dave -
Concerning Wentzco - Attached are 6 photos; 3 are from the Wentzco catalog I have: 3 are pictures of Wentzco FT roofs.
The 3 pictures from the catalog are the only 3 pictures in the catalog that show the bodies or body parts.
The pictures of the roofs show 2 sets of roofs, each set is an A and a B unit. To get the B unit roofs they just cut a portion off of an A unit roof. The 2 sets of roofs are identical castings, the difference is holes have been drilled in one set. I only got 2 of the attachments that fit in some of the holes. Note that the castings have small indentations that spot the hole locations, but not for the holes that the attachments fit in.
I have a built set that I will post pictures of when I find them.
Are you going to the Indy show? I will be at the Indy show and can bring the Wentzco I have and we can compare if you like. Since I don't know your last name, I don't know if we know each other.
Steve
Steve was having trouble uploading the photos ... so he emailed them to me to try ... I only received the attached 3 photos ( so far)
Thank you ..
Nice looking engines what years were these produced? Once Atwater / GMC/ All Nation had there F units I assume all competitors faded from view in the F unit world ...
Does anyone have a side by side, top by top , bottom by bottom comparison photos of the Adams vs Wentzco ?
Thank you
Carey
Dave -
Concerning Wentzco - Attached are 6 photos; 3 are from the Wentzco catalog I have: 3 are pictures of Wentzco FT roofs.
The 3 pictures from the catalog are the only 3 pictures in the catalog that show the bodies or body parts.
The pictures of the roofs show 2 sets of roofs, each set is an A and a B unit. To get the B unit roofs they just cut a portion off of an A unit roof. The 2 sets of roofs are identical castings, the difference is holes have been drilled in one set. I only got 2 of the attachments that fit in some of the holes. Note that the castings have small indentations that spot the hole locations, but not for the holes that the attachments fit in.
I have a built set that I will post pictures of when I find them.
Are you going to the Indy show? I will be at the Indy show and can bring the Wentzco I have and we can compare if you like. Since I don't know your last name, I don't know if we know each other.
Steve
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Wentzco F units
That short roof is a mystery to me, as the B-unit on an FT has a roof that is longer than the A-unit. Check it out:
http://paintshop.railfan.net/images/belanger/ft_ab.html
This is common on all F-units as far as I know. There were a few short FT B-units, exclusive to ABA sets, but again the roofs are not shorter than the A's:
http://paintshop.railfan.net/images/belanger/ft_aba.html
Jim
http://paintshop.railfan.net/images/belanger/ft_ab.html
This is common on all F-units as far as I know. There were a few short FT B-units, exclusive to ABA sets, but again the roofs are not shorter than the A's:
http://paintshop.railfan.net/images/belanger/ft_aba.html
Jim
The link below any photo will display the image full size
-
Chris Webster
- Posts: 956
- Joined: Mon May 25, 2015 8:25 pm
Re: Wentzco F units
Short roof is probably for the 'A' unit -- it doesn't have to cover the nose!
- Arthur P. Bloom
- Posts: 754
- Joined: Wed Dec 13, 2006 6:07 pm
- Location: Eastern Long Island
- Contact:
Re: Wentzco F units
To get the B unit roofs they just cut a portion off of an A unit roof.
Tuther way round, I think you meant.
"I'll have the roast duck...with the mango salsa."
Re: Wentzco F units
R.K. Maroon wrote:That short roof is a mystery to me, as the B-unit on an FT has a roof that is longer than the A-unit. Check it out:
http://paintshop.railfan.net/images/belanger/ft_ab.html
This is common on all F-units as far as I know. There were a few short FT B-units, exclusive to ABA sets, but again the roofs are not shorter than the A's:
http://paintshop.railfan.net/images/belanger/ft_aba.html
Jim
There ain't nothing worse than a RIVET counting DOORSTOP aficianado !
Sorry Jim, I just couldn't resist that one!
Rich
Re: Wentzco F units
The above gives rise to a philosophical question: How bad does a model have to be before it offends a doorstop collector? I would think maybe the cruder the better, but doorstops are not my forte.
Rich
Rich
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Wentzco F units
Anybody looking for complete Wentzco FT A and B, in original box? No drives, wheels or sides.
Dave....gone by invitation
-
Carey Williams
- Posts: 690
- Joined: Sat Dec 24, 2016 3:10 pm
Re: Wentzco F units
Hello Dave
Sure I'd be interested in the set of Wentzco's
Please let me know what price you would like
Thank you
Cheers Carey
Sure I'd be interested in the set of Wentzco's
Please let me know what price you would like
Thank you
Cheers Carey
-
Carey Williams
- Posts: 690
- Joined: Sat Dec 24, 2016 3:10 pm
Re: Wentzco F units
Hello all new posting from Steve Neil
Yes, I got it backwards. I was trying to make the point that they did not do 2 separate patterns to get the roofs for the A & B units. To make the roof for the A unit, they cut a section off the B unit roof.
Scalecraft - I have some interest in the Wentzco that you have. Since it doesn't have wheels, drive units or sides, what does it have?
Steve
Dave if Steve wants the Wentzco pieces great
I'll go for the next set
Cheers Carey
Yes, I got it backwards. I was trying to make the point that they did not do 2 separate patterns to get the roofs for the A & B units. To make the roof for the A unit, they cut a section off the B unit roof.
Scalecraft - I have some interest in the Wentzco that you have. Since it doesn't have wheels, drive units or sides, what does it have?
Steve
Dave if Steve wants the Wentzco pieces great
I'll go for the next set
Cheers Carey
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wentzco F units
Doorstop collector here. I want overall accuracy. I do not collect FTs or FA/FBs in doorstop unless they come with rivets cast in the sides. I do not collect the Baldwin E's, and doubt I would go around the corner for Megow steam.
Overall accuracy, for me, is size, shape, and location of larger details like doors and radiator openings. The finer stuff is only available on expensive brass, and that is a different branch of the hobby.
All branches are legitimate hobbies - even stud rail. I am just putting the finishing touches on a Scale Craft Mountain. It cannot compare with Lobaugh, which in turn does not compete well with MG/USH. I am going to be happy, even though I stopped short of lag clamps, washout plugs, and even proper teminations of air lines - but it will do.
So, yeah - for me, there is a cutoff.
Overall accuracy, for me, is size, shape, and location of larger details like doors and radiator openings. The finer stuff is only available on expensive brass, and that is a different branch of the hobby.
All branches are legitimate hobbies - even stud rail. I am just putting the finishing touches on a Scale Craft Mountain. It cannot compare with Lobaugh, which in turn does not compete well with MG/USH. I am going to be happy, even though I stopped short of lag clamps, washout plugs, and even proper teminations of air lines - but it will do.
So, yeah - for me, there is a cutoff.
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wentzco F units
Here we go - Adams FTs. These need to go back to DRGW Bumblebee or maybe WP Pumpkin.
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wentzco F units
Here are some Ken Krayer FAs - same deal; cast-on rivets and good scale proportions:
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wentzco F units
One more, while I am at it: Adams nose, roof, and trucks. My sides:
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Wentzco F units
I have a set of Adams FT A&B units.
On the Wentzco, near as we can tell, especially based upon the other set I have in service, you cut your own sides from brass sheet.
Nose, ends, roofs, fuel tank sides, and truck sideframes. I don't think there is an invoice still in the box, but it is, in fact, the original box with full label. Can't do much now as I am in smoke central on the coast of Oregon. Dang, this reminds me of the LA Basin 50-60 years ago. This morning near Seattle it was "snowing" ash when we left.
I'll dig it out and get some photos up when I get back after Saturday evening.
On the Wentzco, near as we can tell, especially based upon the other set I have in service, you cut your own sides from brass sheet.
Nose, ends, roofs, fuel tank sides, and truck sideframes. I don't think there is an invoice still in the box, but it is, in fact, the original box with full label. Can't do much now as I am in smoke central on the coast of Oregon. Dang, this reminds me of the LA Basin 50-60 years ago. This morning near Seattle it was "snowing" ash when we left.
I'll dig it out and get some photos up when I get back after Saturday evening.
Dave....gone by invitation
-
stephen neill
- Posts: 151
- Joined: Thu Jun 23, 2016 6:16 pm
Re: Wentzco F units
One more try to see if the system will let me post. This is just a test.
Steve Neill
Steve Neill
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 53 guests
