And, THEY ARE OFF!!! To the baggage races, I guess.

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
stephen neill
Posts: 151
Joined: Thu Jun 23, 2016 6:16 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby stephen neill » Thu Sep 07, 2017 8:35 am

Here is the second try on this. I have started copying my posts to a word document so I can resend them when they don't make it.

Corbin is Bernie Corbin, a noted scratch builder of steam engines in the 1930s and 1940s and later. He built perhaps 50-100 different ones, mainly Burlington but other roads too. I have 2 of his engines, very nice. Several of the Burlington engines in the Seacrest auctions were built by Corbin.

I am not familiar with the freight or passenger cars he built, but I did buy a group of photographs on ebay about 2 years ago; photographs of his engines, but there are several of freight cars. I didn't pay much attention to them thinking they were just kit built and were likely just some he had on his railroad. I'll look at them again and see if I can tell if they were scratch built.

Steve

texas&pacific
Posts: 99
Joined: Wed Mar 30, 2011 2:14 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby texas&pacific » Thu Sep 07, 2017 8:38 am

Ahhhhh closure. :o At least there is value in owning a piece of O scale history.
Gents, get back to your workbenches and create! Don't forget to sign your cars.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby Jay Criswell » Thu Sep 07, 2017 9:10 am

Crap is crap! I don't care who may have built it.

Jay

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby E7 » Thu Sep 07, 2017 9:53 am

Jay Criswell wrote:Crap is crap! I don't care who may have built it.

Jay


BINGO! :mrgreen:

Rich

Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby Carey Williams » Thu Sep 07, 2017 12:13 pm

I'm very happy with my attributed Corbin Adams E5 ..also from one of Seacrest's auctions ....

Cheers Carey
IMG_4381.JPG
IMG_4381.JPG (1.78 MiB) Viewed 5313 times

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby Rufus T. Firefly » Thu Sep 07, 2017 6:18 pm

texas&pacific wrote:Ahhhhh closure. :o At least there is value in owning a piece of O scale history.
Gents, get back to your workbenches and create! Don't forget to sign your cars.


I'll make a note of it :wink: :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby ScaleCraft » Thu Sep 07, 2017 11:23 pm

I looked at the evilbait listing carefully.
Not impressed.
One of those five or ten buck items I am famous for, I guess.
I could use the trucks, probably, but that's about it.
The only items I have with names on the bottom of any historical significance say "Al Ellis"
Dave....gone by invitation

User avatar
MYmoo
Posts: 289
Joined: Mon Jan 06, 2014 10:04 pm
Location: near MP107-GLC RR

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby MYmoo » Sun Sep 10, 2017 3:29 am

ScaleCraft wrote:...
The only items I have with names on the bottom of any historical significance say "Al Ellis"

I still have some that have:
"LIONEL"
"Made in the U.S. of America" (...without the quotes,) on the bottoms.
-----
Unplug When Done.
-----
Peace,

MYron R. MOOre

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby ScaleCraft » Sun Sep 10, 2017 1:20 pm

Well.....first, "Al Ellis" was the last one to attempt to save (and produce) anything Lobaugh (under the Lobaugh name), if my timeline is right.

Second, every piece of 2-rail 0 I have is "Made in USA".
Third, I think every piece of 3-rail is "Made in USA".

My Fords are "Made in USA". My 1911 is "Made in USA". My RCA console radio is "Made in USA". I could fill this page with stuff like that.
I think my OS is still "Made in USA" before MicroSlime stared having OS development from around the globe.
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby bob turner » Mon Sep 11, 2017 7:51 pm

After Ellis, the business went to Jack Campbell, who continued to sell kits and bits/pieces. When Jack died, a hobby shop in LA bought the remains. Thence to Waterman and Lorenzen, who did continue the Lobaugh name sort of. The Lobaugh screw machine company still exists, I think.

Always was a Ford guy. Owned a '50 convert, now have a 64 and 66 Mustang convert - both Rangoon Red.

Then, thinking the Ford name was still good, we bought a 2003 Ranger. Its transmission failed at 30k, a fuel pump ( almost a Grand!) at 40. 15.9 mpg. Even the turn signals do not function as well as a 1956 Ford! It will probably be some other brand next time.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: And, THEY ARE OFF!!! To the baggage races, I guess.

Postby Jay Criswell » Mon Sep 11, 2017 8:12 pm

Yes, Lobaugh still exists but it ain't your daddy's screw machine outfit now. State of the art and very high tech.

Jay


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Google [Bot] and 42 guests