.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Help With 2 Rail Wheels For Weaver Car
Not w/o actually seeing them, but then I would think that a call to NWSL would also solve that for you.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:00 pm, edited 1 time in total.
Running that red block Charlie.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Help With 2 Rail Wheels For Weaver Car
2railjon wrote:Thanks, Rufus! That’s the company I used to use before I lost my way in the wilderness!
Well, we'll do what we can to guide you back onto the true path!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:01 pm, edited 1 time in total.
Running that red block Charlie.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Help With 2 Rail Wheels For Weaver Car
Here's some Atlas trucks:
http://www.modeltrainstuff.com/Atlas-O-66038-Passenger-Car-Truck-p/ato-66038.htm
and some MTH trucks:
http://www.westerndepot.com/product_info.php/products_id/21006/osCsid/c2e2e7e715363c2c1596d92d19020931
and some Lionel trucks:
http://www.lionel.com/products/scale-aluminum-passenger-car-4-wheel-trucks-wpickups-2-6-22366/
I used to get them (ex-K Line) from The Western Depot, but when I looked I didn't see any (6-22366). I used them under my Weaver N&W cars cause the real N&W trucks were 8'-6" centers and the Weaver trucks are only 7'-0"
I still have a pair of them in my parts box. Here's some photos.
Original Weaver trucks that came on N&W cars:
Replacement K-Line/Lionel trucks now under Weaver cars:
Seems like the Kline trucks came with 2-rail wheels(?)
BUT, looking at the trucks under your car they appear to be different than the Weaver trucks that came on the N&W cars.
My Weaver cars had a thin (1/4"?) sheet metal "bolster" that had a tab and a screw to hold them in place. The Lionel trucks have centered posts so I made replacement "bolsters" from 3/16"-1/4" acrylic.
If all else fails you could try calling GGD, nice trucks but a bit pricey.
http://www.modeltrainstuff.com/Atlas-O-66038-Passenger-Car-Truck-p/ato-66038.htm
and some MTH trucks:
http://www.westerndepot.com/product_info.php/products_id/21006/osCsid/c2e2e7e715363c2c1596d92d19020931
and some Lionel trucks:
http://www.lionel.com/products/scale-aluminum-passenger-car-4-wheel-trucks-wpickups-2-6-22366/
I used to get them (ex-K Line) from The Western Depot, but when I looked I didn't see any (6-22366). I used them under my Weaver N&W cars cause the real N&W trucks were 8'-6" centers and the Weaver trucks are only 7'-0"
I still have a pair of them in my parts box. Here's some photos.
Original Weaver trucks that came on N&W cars:
Replacement K-Line/Lionel trucks now under Weaver cars:
Seems like the Kline trucks came with 2-rail wheels(?)
BUT, looking at the trucks under your car they appear to be different than the Weaver trucks that came on the N&W cars.
My Weaver cars had a thin (1/4"?) sheet metal "bolster" that had a tab and a screw to hold them in place. The Lionel trucks have centered posts so I made replacement "bolsters" from 3/16"-1/4" acrylic.
If all else fails you could try calling GGD, nice trucks but a bit pricey.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Help With 2 Rail Wheels For Weaver Car
Welcome back. Order a set of insulated wheelsets with shouldered axles. Disassemble the trucks, and run a #41 drill into each bronze bearing. Re-assemble. If sideframes are too loose, elongate the holes in the bolster, and trim excess off of outside edges of bolsters.
The problem is not wheelsets, but powering the lights! I use wood bolsters for the trucks, thus insulating them.
I do have one pair of K-Line trucks, but they are for the high level cars. The K-Lines came with wipers to all wheels for electrical pickup. I use only scale trucks of proper length on my personal conversions.
The problem is not wheelsets, but powering the lights! I use wood bolsters for the trucks, thus insulating them.
I do have one pair of K-Line trucks, but they are for the high level cars. The K-Lines came with wipers to all wheels for electrical pickup. I use only scale trucks of proper length on my personal conversions.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:01 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:02 pm, edited 1 time in total.
Running that red block Charlie.
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Help With 2 Rail Wheels For Weaver Car
Actually you will like the MTH trucks. Scale length, scale appearance. Might not be much more $. NWSL is not cheap.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:02 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:03 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
Nice to sdee your stuff again, Jon.
Let there be more, please.
Let there be more, please.
roger
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:03 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:03 pm, edited 1 time in total.
Running that red block Charlie.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 67 guests