Calling All Carpenters!!!
Re: Calling All Carpenters!!!
Bob, First off and most important, DON'T feel bad, we know you are doing the best you can. I will look some more tomorrow and see if I can puzzle it out. Can't quite picture why you would have a roof over another roof!
Rich
Rich
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
Rich,
Here's an O-scale model of a Seaboard Section Master's house I built a few years ago:
This more or less represents how the roof from the addition on the back mates to the roof of the old house. The addition to my real house is bigger and the roof is taller, but this should explain it.
Here's the SAL house as drawn by Julian Cavalier for Mainline Modeler:
Building this model showed me just how compressed some of the O-scale buildings are that are being offered for sale.
Here's an O-scale model of a Seaboard Section Master's house I built a few years ago:
This more or less represents how the roof from the addition on the back mates to the roof of the old house. The addition to my real house is bigger and the roof is taller, but this should explain it.
Here's the SAL house as drawn by Julian Cavalier for Mainline Modeler:
Building this model showed me just how compressed some of the O-scale buildings are that are being offered for sale.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
- Rufus T. Firefly
- Posts: 42238
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Calling All Carpenters!!!
Seaboard Air Line Fan wrote:Roy/Rufus,
I've already looked behind the plywood, easy to do. Got plenty of wire and duct hanging behind the knee wall just waiting to be re-routed.
Exceptionally lucky.
Can't quite picture why you would have a roof over another roof!
See it all the time. Extension added to the house and they just tack the roof for the new section on over the old roof. Part of the roof over my place in PA is like that - father extended the one side, peeled enough roof back to tie in the new rafters, and left the old roof in place.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Calling All Carpenters!!!
Seaboard Air Line Fan wrote:Rich,
This more or less represents how the roof from the addition on the back mates to the roof of the old house. The addition to my real house is bigger and the roof is taller, but this should explain it.
Bob, The main thing you want to remember is if you remove pieces of structural members like rafters/joists (floor or ceiling) is that you will need to put headers across the shortened framing member to the adjacent rafters or joints as we (and Chuck) discussed earlier.
As for your 30 inch door opening, a piece of plywood with a piano hinge might be the way to go. You could use a hook and eye
to keep it held open when going in and out.
Rich
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
My knee felt good today so I decided to open the access hole a bit.
Basically all I did was remove some knee wall sheet rock, a brace, then cut about 5’ of the end of the rafter out:
What you see at the top is the underneath of my current layout. I left the old roof boards in place for now. I don’t think removing the piece of rafter caused any weakening, but I’ll put a header in anyway.
I’m going to line the sides of the entrance with plywood or paneling so I made templates for them out of cardboard and stapled them in place to see how it’s going to look. I nailed some 1x8 down for the floor.
After I stapled the temporary cardboard up I started cleaning up when I heard some scratching. All I could think of was rodents, turned out my female cat Lily had wandered behind the knee wall when I went to the garage to get the cardboard and I had stapled her inside
Popped a few staples loose and she came out with a “What are you looking at expression” on her face.
The drywall/Sheetrock where the heat register is shaky at best, To the right of it is where they ran the ac/heat trunk lines and in the process removed a good bit of the drywall. May take out what’s left and put in a wood panel (paneling?).
Fix the drywall, make a door, cut out the old roof boards to open into the attic, and finish the floor and cut the paneling for the sides and I can start moving all that stuff!
Basically all I did was remove some knee wall sheet rock, a brace, then cut about 5’ of the end of the rafter out:
What you see at the top is the underneath of my current layout. I left the old roof boards in place for now. I don’t think removing the piece of rafter caused any weakening, but I’ll put a header in anyway.
I’m going to line the sides of the entrance with plywood or paneling so I made templates for them out of cardboard and stapled them in place to see how it’s going to look. I nailed some 1x8 down for the floor.
After I stapled the temporary cardboard up I started cleaning up when I heard some scratching. All I could think of was rodents, turned out my female cat Lily had wandered behind the knee wall when I went to the garage to get the cardboard and I had stapled her inside
The drywall/Sheetrock where the heat register is shaky at best, To the right of it is where they ran the ac/heat trunk lines and in the process removed a good bit of the drywall. May take out what’s left and put in a wood panel (paneling?).
Fix the drywall, make a door, cut out the old roof boards to open into the attic, and finish the floor and cut the paneling for the sides and I can start moving all that stuff!
Last edited by Seaboard Air Line Fan on Wed Jan 10, 2018 8:56 am, edited 2 times in total.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Calling All Carpenters!!!
It looks like the last picture is turned ninety degrees.
Torturers, White Racists, Gay Bashers, Rich Psychopaths.
- Rufus T. Firefly
- Posts: 42238
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Calling All Carpenters!!!
Roy wrote:It looks like the last picture is turned ninety degrees.
Maybe he fell and can't get up but is continuing to post from his smart phone?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
Figures, I took the photo with my IPad and also typed the post on it, so.....
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
FIXED!
Had to copy the photo onto my desktop then rotate it. Deleted the original in the post then added the flipped photo back in.
Had to copy the photo onto my desktop then rotate it. Deleted the original in the post then added the flipped photo back in.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Calling All Carpenters!!!
Aha! So, when do you cut the roof boards, so you can access your attic?
Torturers, White Racists, Gay Bashers, Rich Psychopaths.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
Roy,
Yep, that’s the plan.
I really need to cut them out of the way in order to finish the rest of it, but with my knee still healing and needing a 7’ or 8’ step ladder vice the 6 footer I have now, I should wait until I get a taller ladder.
I can use my 6 footer, but have to lift myself into the hatch in the 8’ closet ceiling then swing my legs around, the knee is keeping me from doing that, but should be well by the weekend.
Once complete I’ll probably never need the hatch in the closet ceiling, unless I use it for an escape route in case of fire.
Hopefully the floor in the attic is the same height as the floor in the old part of the house. I’ll find out when I cut those boards. If not it’ll be easy to shim something to get them the same.
My dad (carpenter) said...”You know why they made moulding? To cover up all the mistakes they made during construction!”
Yep, that’s the plan.
I really need to cut them out of the way in order to finish the rest of it, but with my knee still healing and needing a 7’ or 8’ step ladder vice the 6 footer I have now, I should wait until I get a taller ladder.
I can use my 6 footer, but have to lift myself into the hatch in the 8’ closet ceiling then swing my legs around, the knee is keeping me from doing that, but should be well by the weekend.
Once complete I’ll probably never need the hatch in the closet ceiling, unless I use it for an escape route in case of fire.
Hopefully the floor in the attic is the same height as the floor in the old part of the house. I’ll find out when I cut those boards. If not it’ll be easy to shim something to get them the same.
My dad (carpenter) said...”You know why they made moulding? To cover up all the mistakes they made during construction!”
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
BREAKTHROUGH!!!
I cut the roof boards from the inside (the side shown in this photo) yesterday. I have 2 to finish cutting then clean up the sides (from the attic side).
I had forgotten just how much "stuff" was already up there, stuff from my mother-in-laws before she moved to here (Portsmouth VA from Vicksburg MS). Need to buy at least 2 more sheets of plywood.
The light at the end is a vent, the room below is 24x24. I got up there last night and rearranged about 1/2 the boxes putting them on 2 sheets of ply I had already bought and cut to 24" wide so I could get them upstairs and thru the hole I made.
Once I trim up the sides all I need to do is put down 1 more piece of wood for the floor (the dark thing nearest the hole is a piece of cardboard) and maybe some trim to make it easy on the eyes. Well that and install some insulation on the ceiling.
I could open a store with the antiques/old stuff from my mother-in-laws house, my wife's Sarah Coventry jewelry, and my collection of 1/6 Dragon WW2 figures!
slight drift...who knows anything about beer steins? Here's 3 that belonged to my father-in-law that my wife's aunt (colonel in the army nurse corp stationed in Germany AND Japan after the war). The head is my favorite:
It's says Made In Germany and has Hoche Handgemak (? hard to read but I think there's an "a" missing in Handgemaak - handmade?) plus some other stampings on the bottom.
I cut the roof boards from the inside (the side shown in this photo) yesterday. I have 2 to finish cutting then clean up the sides (from the attic side).
I had forgotten just how much "stuff" was already up there, stuff from my mother-in-laws before she moved to here (Portsmouth VA from Vicksburg MS). Need to buy at least 2 more sheets of plywood.
The light at the end is a vent, the room below is 24x24. I got up there last night and rearranged about 1/2 the boxes putting them on 2 sheets of ply I had already bought and cut to 24" wide so I could get them upstairs and thru the hole I made.
Once I trim up the sides all I need to do is put down 1 more piece of wood for the floor (the dark thing nearest the hole is a piece of cardboard) and maybe some trim to make it easy on the eyes. Well that and install some insulation on the ceiling.
I could open a store with the antiques/old stuff from my mother-in-laws house, my wife's Sarah Coventry jewelry, and my collection of 1/6 Dragon WW2 figures!
slight drift...who knows anything about beer steins? Here's 3 that belonged to my father-in-law that my wife's aunt (colonel in the army nurse corp stationed in Germany AND Japan after the war). The head is my favorite:
It's says Made In Germany and has Hoche Handgemak (? hard to read but I think there's an "a" missing in Handgemaak - handmade?) plus some other stampings on the bottom.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Calling All Carpenters!!!
I would "neaten" up those wavy edges with a circular saw......set the depth of the blade just slightly deeper than the thickness of the boards you are cutting. From what I see, you might want to make your door from one piece of plywood (the big box stores will cut it to size for you). Looks like there is a wall to the right on the inside of the opening........put a piano hinge on the right side of your door and add a screw eye and hook to hold your door open, and from what I can see you will be in business!
Check Ebay for your steins....if not there, search the net with Bing and Google.
Check Ebay for your steins....if not there, search the net with Bing and Google.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Calling All Carpenters!!!
I straightened the edges using my jigsaw, used up 2blades!
I put a door on, but on the opposite side from where the vent is seen. Probably should swap it though, either the floor has a slope or the knee wall brace is tilted (should checked first, I think it's the brace) and I had to cut almost an inch off to make it open. The brace near the vent is straight so maybe I just need to make another door and move the hinge.
Need to get 2 more sheets of plywood, man I got a lotta stuff
If nothing else, I smell a YARDSALE coming
I put a door on, but on the opposite side from where the vent is seen. Probably should swap it though, either the floor has a slope or the knee wall brace is tilted (should checked first, I think it's the brace) and I had to cut almost an inch off to make it open. The brace near the vent is straight so maybe I just need to make another door and move the hinge.
Need to get 2 more sheets of plywood, man I got a lotta stuff
If nothing else, I smell a YARDSALE coming
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Calling All Carpenters!!!
Seaboard Air Line Fan wrote:I straightened the edges using my jigsaw, used up 2blades!
Obviously you can do it that way, because you did, but a circular saw with a good carborundum tipped blade. a straight edge (to use for a cutting guide) and a few clamps will make the job a whole lot less painful, quicker and neater. You might need the jigsaw to finish the corners!
Return to “The Club Car Lounge”
Who is online
Users browsing this forum: No registered users and 47 guests