ATSF Panel-Side Automobile Boxcar

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

ATSF Panel-Side Automobile Boxcar

Postby R.K. Maroon » Fri Dec 01, 2017 12:42 pm

A friend recently sent me this very nice model of a 50' panel-side double-door ATSF automobile car:

Auto Box ATSF 67215.JPG
Auto Box ATSF 67215.JPG (73.57 KiB) Viewed 6797 times

The car is dated 1968. It is of unusual construction. The roof and floors are wood. The sides are wood with what looks like a very thin resin overlay. The doors and ends are cast resin. I know that Zimmer and Suncoast both offered 40' ATSF panel-side boxcars, but I am unaware of a kit like this. As far as I know, the Cooch kits were all resin, and I don't recall them offering this car. Any clues? The car is darker than it looks, but I have lightened it up in the photo to show the detail better. The car needs a little TLC but is otherwise serviceable and will provide a nice complement to all those Athearn ATSF auto cars currently on the local club's roster.

Jim
The link below any photo will display the image full size

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby Jay Criswell » Fri Dec 01, 2017 1:05 pm

FWIW, Zimmer did a 50" also. Not saying that's what you have just correcting the record.

How about a photo of the bottom?

Jay

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby R.K. Maroon » Fri Dec 01, 2017 1:23 pm

Thanks, Jay -- I did not know about the 50' Zimmer. Here is a shot of the bottom.

Auto Box ATSF 67215 -- Bottom View.JPG
Auto Box ATSF 67215 -- Bottom View.JPG (45.84 KiB) Viewed 6787 times

Nothing fancy: Athearn metal trucks, fixed couplers.
The link below any photo will display the image full size

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby bob turner » Fri Dec 01, 2017 9:03 pm

Hot digs! I have one. Lobaugh. Photos manana.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby Jay Criswell » Fri Dec 01, 2017 10:15 pm

Bob,

I was going to mention the Lobaugh but Jim says this model has resin doors and ends. Don't think Rollin was big on resin.

Jay

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby R.K. Maroon » Sat Dec 02, 2017 12:09 am

You guys are good -- Lobaugh did indeed make this car:

Lobaugh ATSF FeV.png
Lobaugh ATSF FeV.png (369.49 KiB) Viewed 6722 times

Note the rivets in the spaces between the panels, missing on my model. Other details don't quite match either, like door hardware. Here's the description:

Lobaugh ATSF FeV Text.png
Lobaugh ATSF FeV Text.png (116.21 KiB) Viewed 6722 times

No pressed metal on mine. Also note that if you were to have bought the car factory-built from Lobaugh it would have arrived hand-lettered. The decals were only available to the lesser rich guys that could only afford kit. That seems preposterous now but what goes around comes around. Hand-lettered was apparently prized more than decals then, and if you listed one each from the era on eBay now, the hand-lettered one would again bring a higher price. The value holds in another way too -- I would say from my limited experience that a high percentage of hand-lettered cars from that era still have lettering that looks good today, but only a low percentage of decaled cars from the same era still have the decals intact. No, I don't have data to back that up.

Jim
The link below any photo will display the image full size

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby J. S. Bach » Sat Dec 02, 2017 5:30 pm

R.K. Maroon wrote: ...snip... I would say from my limited experience that a high percentage of hand-lettered cars from that era still have lettering that looks good today, but only a low percentage of decaled cars from the same era still have the decals intact. No, I don't have data to back that up. Jim

Paint vs decal film. Plus, the shellac (or whatever) that was sometimes applied to "seal" the decal has degenerated over the years.

User avatar
Erik C Lindgren
Posts: 1307
Joined: Wed Apr 28, 2010 11:37 pm
Contact:

Re: ATSF Panel-Side Automobile Boxcar

Postby Erik C Lindgren » Sun Dec 03, 2017 9:40 pm

The markings are absolutely identical to the DSMR marked cars I’ve had many encounters with over the last 15 years. It looks like either Calahan’s (50’s later into 80’s) hand writing or maybe even Kennedy (wayback to 1940’s). They used to mark them on each inspection that included “lub” or “gaged”... 6/68, 4/54, 3/39 etc. Lovey specimen man!! If in fact it’s an ex-Denver Society car that’s a neat bunch of history dating to the 1930’s.

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby bob turner » Mon Dec 04, 2017 6:49 pm

Here is mine - genuine Lobaugh with stamped brass doors and ends. A nice model. Cannot find the matching ice car.

DSC02533.JPG
DSC02533.JPG (909.16 KiB) Viewed 6593 times

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby Jay Criswell » Mon Dec 04, 2017 7:34 pm

Interesting. The prototype doesn't have rivets down the center of the channel separating the panels. Somebody's imagination or just artistic license?

Jay

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby Jay Criswell » Sat Dec 09, 2017 7:37 pm

1936 Model Craftsman had plans and instructions on building this car (the 50 footer). Same copy had the ad from Lobaugh showing their kit.

Here are photos of a A-N (Zimmer actually) and a Suncoast version of the 40' cars. A-N made them way too tall and used the wrong ends but, hey, that's what was available.

Image
Image
Image
Image
Image
Image
Image

Jay

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby R.K. Maroon » Sun Dec 10, 2017 12:04 am

Thanks for posting the photos, Jay. I was aware of both versions but don't know enough about the prototypes to know that the A-N car was not correctly proportioned. It is tall, though -- that's for sure:

Image

I believe I have one of the Suncoast models, but I also have one or two scratchbuilt versions -- I will dig them out and post photos as I can.

Jim
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby R.K. Maroon » Tue Jan 16, 2018 9:34 pm

I stumbled onto this photo hiding in my files today:

Suncoast ATSF Panel Box Car Kit.JPG
Suncoast ATSF Panel Box Car Kit.JPG (163.62 KiB) Viewed 6416 times

I think I have the actual model too. With luck I will stumble on that as well.
The link below any photo will display the image full size

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: ATSF Panel-Side Automobile Boxcar

Postby sarge » Wed Jan 17, 2018 12:17 pm

Jim

They are nice kits; I've done several over the years. At one time if memory serves, Woody Grosdof owned Suncoast and made those kits, still available in the 90s. They came in two versions, one as built with K-brakes and the earlier reporting mark on the decals and a modernised version without the periods on the reporting mark and different brakegear.

Jay, a question for you. Were there not several different classes of panelside boxcar? I seem to remember (wrongly probably, since my memory has been pretty faulty lately) there was a car done by ATSF to either the '32 or '37 AAR design but with panel sides rather than steel (perhaps even wartime?) much in the same manner GN did with their own style of wooden cladding, and the Zimmer was at least close as a 10' 6" IH version. I could easily be 'way wrong, but I did run a Zimmer on my old layout for years under those (suspect) premises, one that Ted Stepek originally built.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: ATSF Panel-Side Automobile Boxcar

Postby Jay Criswell » Wed Jan 17, 2018 1:57 pm

Sarge,

I have a book here somewhere that provides most, if not all, of the data. Truthfully, I don't recall the specifics.

Yeah, I have a bunch of the Sun Coast kits. Some started, some still in kit form. Four or five Zimmers too. A couple of those were started but need to be taken back apart because some of the pieces were installed poorly. Maybe some ambitious soul will take up the challenge.....I don't seem to have the time.

Jay


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Google [Bot] and 38 guests