.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: PRR Business Car 2 Railed!
2railjon wrote:Unfortunately the only material was a sort of thin piece of brass. They should be easy to replace as soon as I find a thinner qauge material with more spring. ]
Phosphorbronze wipers from Rod Miller (I think....) might be a viable option, although I tend to use spring brass wire solely because I have a few rolls of it in the shop.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: PRR Business Car 2 Railed!
Robert wrote:These...http://www.rodmiller.com/parts.html#wipers
Thanks! Good to affirm that the memory is still functional,
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: PRR Business Car 2 Railed!
Wait! Whoa! Somebody here is actually building something?
Heretic! To arms!

Heretic! To arms!
Re: PRR Business Car 2 Railed!
.
Last edited by 2railjon on Sun May 27, 2018 5:52 pm, edited 2 times in total.
Running that red block Charlie.
- rex desilets
- Posts: 1786
- Joined: Sun Jul 15, 2007 2:18 pm
Re: PRR Business Car 2 Railed!
Oh, no. We keep such people around as an inspiration to better ourselvessarge wrote:Wait! Whoa! Somebody here is actually building something?
Heretic! To arms!
![]()
![]()
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams
Re: PRR Business Car 2 Railed!
PS I hope you caught my PRR business women in the back of the car! 
Running that red block Charlie.
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: PRR Business Car 2 Railed!
Jon - just run a #41 drill into the sideframe holes while you have them apart. Then you retain the full length of the journal and no sharp Dremel burrs to cut the journal holes.
Re: PRR Business Car 2 Railed!
bob turner wrote:Jon - just run a #41 drill into the sideframe holes while you have them apart. Then you retain the full length of the journal and no sharp Dremel burrs to cut the journal holes.
Thanks Bob!
Running that red block Charlie.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: PRR Business Car 2 Railed!
2railjon wrote:Rufus, I just ordered this:
I enjoy rolling my own!![]()
Good for you!!!
I hope you caught my PRR business women in the back of the car!
I thought that was the maid getting ready for turn down service,
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: PRR Business Car 2 Railed!
sarge wrote:Wait! Whoa! Somebody here is actually building something?
I thought that was no longer permitted or appreciated here..........
Heretic! To arms!

What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 72 guests