.
Re: The Weaver Hiawatha Cars Arrived And.....
Wrong box, wrong cars, or misrepresented?
Oh, nubbins......

Oh, nubbins......
Re: The Weaver Hiawatha Cars Arrived And.....
.
Last edited by 2railjon on Sun May 27, 2018 5:40 pm, edited 1 time in total.
Running that red block Charlie.
Re: The Weaver Hiawatha Cars Arrived And.....
That might be scary, because the only way I can think of is to disolve the styro off the paint. I don't know if alcohols will be strong enough, although methylated spirit/denatured is used as a artists solvent. Lighter fluid would be my next go. Then I'm thinking acetone but for gods sake test each someplace hidden first, because I have no idea what the Chinese painted and printed it with.
No bets, mate, so proceed with caution and a light hand.
No bets, mate, so proceed with caution and a light hand.
Re: The Weaver Hiawatha Cars Arrived And.....
.
Last edited by 2railjon on Sun May 27, 2018 5:40 pm, edited 1 time in total.
Running that red block Charlie.
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Weaver Hiawatha Cars Arrived And.....
If you can find it, benzene will most likely do it.
Re: The Weaver Hiawatha Cars Arrived And.....
.
Last edited by 2railjon on Sun May 27, 2018 5:40 pm, edited 1 time in total.
Running that red block Charlie.
Re: The Weaver Hiawatha Cars Arrived And.....
2railjon wrote:Sarge, yes acetone will dissolve styrofoam, but may be fatal to the paint. I have read up that kerosene will also do the same and not harm paint if not allowed to dry. Hmmm.
The real pisser is the seller wants 995. For the engine knowing the styrofoam is stuck to it and won’t back off on his asking price.
Why I suggested testing in a hidden place. It all depends on what they painted it with. Lots of paints won't be touched by acetone after curing, benz has the same question, & c.
Unless you absolutely had to have it, for that money with no risk-free way to clean it (since we don't know the paint formulation), I'd council walking or tell him if he cleans it successfully you'll pony up the $995, which strikes me as pricey for you taking the risk.
Re: The Weaver Hiawatha Cars Arrived And.....
.
Last edited by 2railjon on Sun May 27, 2018 5:41 pm, edited 1 time in total.
Running that red block Charlie.
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Weaver Hiawatha Cars Arrived And.....
2railjon wrote:Not sure if benzene is available to the public, Bob.
Pretty sure it's not going to be available; a definite carcinogen and nasty stuff to inhale. Maybe if you know somebody in a Chem Department at a college?
You're 3 months too late for me to send you any
But as Sarge stated - test very discretely maybe with a hard q-tip - it does all come down to the type of paint.
I know solvents that will definitely remove the stuff, but odds are the paint goes with it using them.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: The Weaver Hiawatha Cars Arrived And.....
.
Last edited by 2railjon on Sun May 27, 2018 5:41 pm, edited 1 time in total.
Running that red block Charlie.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: The Weaver Hiawatha Cars Arrived And.....
Jon,
Try a Mister Clean Magic Eraser on a small spot and see what it does. It'll probably leave the finish dull, but so will most anything else.
Try a Mister Clean Magic Eraser on a small spot and see what it does. It'll probably leave the finish dull, but so will most anything else.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: The Weaver Hiawatha Cars Arrived And.....
.
Last edited by 2railjon on Sun May 27, 2018 5:42 pm, edited 1 time in total.
Running that red block Charlie.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: The Weaver Hiawatha Cars Arrived And.....
If you try the eraser, soak it in plain water first and see what happens.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
-
Carey Williams
- Posts: 690
- Joined: Sat Dec 24, 2016 3:10 pm
Re: The Weaver Hiawatha Cars Arrived And.....
Hello all
In the good old days (the late 30's early 40's ) ...you buy a Lionel Hiawatha and send it off to Walthers or Vanden Boom and they have a whole department ( more like one guy at a bench) set up to help your engine shed it's center rail pick up ...by adding an outside 3rd rail shoes ..or insulating the wheels .
Here we have a stock Lionel Hiawatha ..that transitioned to outside 3rd rail ....and then to 2 rail operation ... the 3 stages of the Caterpillar.
Remains of the block for the shoe on the tender ..and holes under the engine from the shoe mount . Scale pilot , trailing wheels and tender trucks ..help the butterfly .
In the good old days (the late 30's early 40's ) ...you buy a Lionel Hiawatha and send it off to Walthers or Vanden Boom and they have a whole department ( more like one guy at a bench) set up to help your engine shed it's center rail pick up ...by adding an outside 3rd rail shoes ..or insulating the wheels .
Here we have a stock Lionel Hiawatha ..that transitioned to outside 3rd rail ....and then to 2 rail operation ... the 3 stages of the Caterpillar.
Remains of the block for the shoe on the tender ..and holes under the engine from the shoe mount . Scale pilot , trailing wheels and tender trucks ..help the butterfly .
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 43 guests