Need Track for On30 Forney

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Tramp
Posts: 4735
Joined: Wed Jan 14, 2004 1:21 pm
Location: Down East
Contact:

Need Track for On30 Forney

Postby Tramp » Sat Feb 10, 2018 11:01 am

Want to buy the best track and switches to run this little fellow. Suggestions for brand and where to mail order.

Image
Last edited by Tramp on Sat Feb 10, 2018 1:20 pm, edited 1 time in total.
That a life will be spent gaining inches,
When this distance is read in miles.

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: Need Track for On30 Forney

Postby 2railjon » Sat Feb 10, 2018 11:24 am

Here you go Tramp!
Image
Running that red block Charlie.

Nortonville Phil
Posts: 223
Joined: Sat Jul 31, 2010 11:05 pm
Location: Red Oak TX
Contact:

Re: Need Track for On30 Forney

Postby Nortonville Phil » Sat Feb 10, 2018 9:08 pm

Hiya Tramp!

You could try the PECO O 16.5 (On30) track. They make switches and Flex track. Check out the PECO web site. I have used PECO HO and it was nice.
Trinity Valley Traction Co.
Texas Midland Railroad
Homewood Shops
Red Oak, TX

My traction blog: Bluebonnet Limited
http://bluebonnetlimited.blogspot.com/

Homewood Shops YouTube:
https://youtube.com/@cug6?si=BCFnDDtUw2eVKamo

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Need Track for On30 Forney

Postby E7 » Tue Feb 13, 2018 1:20 am

Tramp,

I know pretty much zip about ON30, but there is an ON30 group on Yahoo owned by Bobber Gibbs former "Narrow Minded" columnist of OST. I'm sure those folks would have some ideas/opinions.

Rich

User avatar
Rufus T. Firefly
Posts: 42220
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Need Track for On30 Forney

Postby Rufus T. Firefly » Tue Feb 13, 2018 8:28 am

Tramp wrote:Want to buy the best track and switches to run this little fellow.


No photo showing; maybe a different hosting service is needed, :wink: :wink:

PECO makes good stuff, or so I am told
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Robert
Posts: 1051
Joined: Sat Dec 11, 2010 3:00 pm

Re: Need Track for On30 Forney

Postby Robert » Tue Feb 13, 2018 8:56 am

Isn't On30 track essentially regular HO track? I seem to recall when On30 was first entering the market one of it's advantages was its compatibility with common HO track...which is available EVERYWHERE...worth trying one piece to see if that's true.

Robert

User avatar
Rufus T. Firefly
Posts: 42220
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Need Track for On30 Forney

Postby Rufus T. Firefly » Tue Feb 13, 2018 10:01 am

Robert wrote:Isn't On30 track essentially regular HO track? I seem to recall when On30 was first entering the market one of it's advantages was its compatibility with common HO track...which is available EVERYWHERE...worth trying one piece to see if that's true.


It is but one of the complaints of using it is that the ties and their spacing are still HO.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: Need Track for On30 Forney

Postby rex desilets » Tue Feb 13, 2018 11:28 am

Micro Engineering makes lovely, if a bit fragile, On30 track. Their switches are notoriously fragile.
On our club On30 addition we elected PECO track & switches (advertised as On30) because they are robust and, to date, trouble free. With some weathering and ballast-burying one can reduce the visual discrepancy.
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

Tom Dempsey
Posts: 1002
Joined: Mon Dec 23, 2013 10:15 pm

Re: Need Track for On30 Forney

Postby Tom Dempsey » Tue Feb 13, 2018 5:22 pm

I think the PECO track is all around easier to work with and more robust than MicroEngineering.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 38 guests