
Need Track for On30 Forney
Need Track for On30 Forney
Want to buy the best track and switches to run this little fellow. Suggestions for brand and where to mail order.


Last edited by Tramp on Sat Feb 10, 2018 1:20 pm, edited 1 time in total.
That a life will be spent gaining inches,
When this distance is read in miles.
When this distance is read in miles.
-
Nortonville Phil
- Posts: 223
- Joined: Sat Jul 31, 2010 11:05 pm
- Location: Red Oak TX
- Contact:
Re: Need Track for On30 Forney
Hiya Tramp!
You could try the PECO O 16.5 (On30) track. They make switches and Flex track. Check out the PECO web site. I have used PECO HO and it was nice.
You could try the PECO O 16.5 (On30) track. They make switches and Flex track. Check out the PECO web site. I have used PECO HO and it was nice.
Trinity Valley Traction Co.
Texas Midland Railroad
Homewood Shops
Red Oak, TX
My traction blog: Bluebonnet Limited
http://bluebonnetlimited.blogspot.com/
Homewood Shops YouTube:
https://youtube.com/@cug6?si=BCFnDDtUw2eVKamo
Texas Midland Railroad
Homewood Shops
Red Oak, TX
My traction blog: Bluebonnet Limited
http://bluebonnetlimited.blogspot.com/
Homewood Shops YouTube:
https://youtube.com/@cug6?si=BCFnDDtUw2eVKamo
Re: Need Track for On30 Forney
Tramp,
I know pretty much zip about ON30, but there is an ON30 group on Yahoo owned by Bobber Gibbs former "Narrow Minded" columnist of OST. I'm sure those folks would have some ideas/opinions.
Rich
I know pretty much zip about ON30, but there is an ON30 group on Yahoo owned by Bobber Gibbs former "Narrow Minded" columnist of OST. I'm sure those folks would have some ideas/opinions.
Rich
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Need Track for On30 Forney
Tramp wrote:Want to buy the best track and switches to run this little fellow.
No photo showing; maybe a different hosting service is needed,
PECO makes good stuff, or so I am told
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Need Track for On30 Forney
Isn't On30 track essentially regular HO track? I seem to recall when On30 was first entering the market one of it's advantages was its compatibility with common HO track...which is available EVERYWHERE...worth trying one piece to see if that's true.
Robert
Robert
- Rufus T. Firefly
- Posts: 42220
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Need Track for On30 Forney
Robert wrote:Isn't On30 track essentially regular HO track? I seem to recall when On30 was first entering the market one of it's advantages was its compatibility with common HO track...which is available EVERYWHERE...worth trying one piece to see if that's true.
It is but one of the complaints of using it is that the ties and their spacing are still HO.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- rex desilets
- Posts: 1786
- Joined: Sun Jul 15, 2007 2:18 pm
Re: Need Track for On30 Forney
Micro Engineering makes lovely, if a bit fragile, On30 track. Their switches are notoriously fragile.
On our club On30 addition we elected PECO track & switches (advertised as On30) because they are robust and, to date, trouble free. With some weathering and ballast-burying one can reduce the visual discrepancy.
On our club On30 addition we elected PECO track & switches (advertised as On30) because they are robust and, to date, trouble free. With some weathering and ballast-burying one can reduce the visual discrepancy.
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams
-
Tom Dempsey
- Posts: 1002
- Joined: Mon Dec 23, 2013 10:15 pm
Re: Need Track for On30 Forney
I think the PECO track is all around easier to work with and more robust than MicroEngineering.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 36 guests
