Is this ugly or What?

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Is this ugly or What?

Postby bob turner » Fri Feb 16, 2018 12:17 pm

I had a couple models with Walsall drivers - shell cast cast iron. Very lacy in appearance. Not my favorite look. Lorenzen had a line of coined brass drivers that were quite good (until he plated the axles and pins; then they required careful re-machihing). All Nation look ok, and while you cannot just call BTS, they are still out there.

Joe is a source. I do have cast iron blanks, and have been known to send a set to joe for machining for a third party. So it is still possible to scratchbuild without Sarge's admonishment.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: Is this ugly or What?

Postby sarge » Fri Feb 16, 2018 1:27 pm

Admonishment? Hardly.

Suggestion, yes. You mentioned trying to source drivers and doing these as articles. I was giving you an easy source that you can pass along in that article.

If you are doing them just for you, that's one thing. If you are doing these to present as article subjects for others to emulate, a ready source for all the parts becomes important.

Do as you will.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Is this ugly or What?

Postby bob turner » Fri Feb 16, 2018 1:51 pm

Back when I was regularly doing this sort of thing, I would suggest several alternatives. The UK drivers were a possibility, so I ordered a set. I got stung rather badly on a small shipment, but I personally did not care for the product. They were beautifully done, and spot-on for British steam.

Ed and I were friends for a while, and I actually reviewed one of his products in OSN. I had to bite my tongue, but I never said anything inaccurate about the model. About a decade later he decided he hated my guts. I never found out why. He was the reason for the "opinion" that follows most of my posts. It may have been my opinion about using different ratio gearboxes in articulated models. He did not like that idea.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: Is this ugly or What?

Postby J. S. Bach » Sat Feb 17, 2018 7:37 am

rrjjf wrote:Bob Turner,
I would ream out the drovers and insert 1/4 drill rod axles.
Joe

I would be very careful about reaming out those drovers! :mrgreen: :mrgreen: :lol: :mrgreen:

rrjjf
Posts: 593
Joined: Tue May 08, 2007 5:13 am
Location: Glen Arm Maryland

Re: Is this ugly or What?

Postby rrjjf » Sat Feb 17, 2018 9:01 am

J.S. Bach,

I have performed this operation several times to save All Nation drivers that have worn down "D" openings due to the drivers being operated with loose axle nuts. I ream the drivers to 0.249" with a precision reamer and install the drivers on the new 1/4" axles with some Loctite 609 Retaining Compound...no more loose drivers. I can quarter drivers accurately without the need for the "D slots and All Nation axles.

Varney designed their drivers to be assembled by a modeler that did not have the tools or skills necessary to accurately quarter drivers. Their method works until the drivers start to work loose while in operation and the Zamac driver center becomes worn and this results in a loose fit.
When assembling a new set of drivers I will use them as designed but add a drop of Loctite 242 (removeable) to the threads on the ends of the Varney axles before tightening them down. This seems to work.

What is your concern?

Joe
Joe Foehrkolb

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Is this ugly or What?

Postby bob turner » Sat Feb 17, 2018 11:45 am

I agree - turns out most of my AN drivers have the "flat" torn out. Makes little difference on a two axle unsprung locomotive; I will quarter by eyeball and Loctite. Joe's method is good, but you need a lathe with a really good concentric mount to do the ream job. A step-collet comes to mind.

I don't use AN drivers very often. Except for this and the Varney ten-wheeler, they are too lacy for me. All my Mountains, the Pacific, and Atlantic, got cast iron.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Is this ugly or What?

Postby bob turner » Sat Feb 17, 2018 2:02 pm

Here is the project as it stands. I did most of it a decade ago, then last night prepared the firebox and window sheets. We'll see . . . It does belong in the ugly thread for now.

I did paint and add class lamps to the ugly American. Forgot to include it in my photo shoot. No longer quite so ugly.

DSC02560.JPG
DSC02560.JPG (526.41 KiB) Viewed 6193 times

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Is this ugly or What?

Postby bob turner » Sat Feb 17, 2018 2:04 pm

Here is another ugly - laying around for probably a quarter-century. There is hope; those two Berks were laying around for longer than that!

DSC02561.JPG
DSC02561.JPG (464.45 KiB) Viewed 6192 times


Front truck is off the track for Dave. I didn't even know it had a front truck.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: Is this ugly or What?

Postby J. S. Bach » Sat Feb 17, 2018 11:25 pm

rrjjf wrote:J.S. Bach, What is your concern? Joe

You made a humorous typo, "drovers" for "drivers". I just thought that it was funny as "drovers" refers, usually, to those folks who handle cattle.

rrjjf
Posts: 593
Joined: Tue May 08, 2007 5:13 am
Location: Glen Arm Maryland

Re: Is this ugly or What?

Postby rrjjf » Sun Feb 18, 2018 9:46 am

J.S.,

Missed that. Never try to ream out a drover! As I get older my typing gets sloppier.

Joe
Joe Foehrkolb

Tom Dempsey
Posts: 1002
Joined: Mon Dec 23, 2013 10:15 pm

Re: Is this ugly or What?

Postby Tom Dempsey » Sun Feb 18, 2018 12:45 pm

Let the cows end up in a ravine and watch a drover get reamed out big time buddy.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: Is this ugly or What?

Postby J. S. Bach » Sun Feb 18, 2018 7:54 pm

rrjjf wrote:J.S.,
Missed that. Never try to ream out a drover! As I get older my typing gets sloppier. Joe


:mrgreen: :mrgreen: :lol: :mrgreen: Mine, too.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Is this ugly or What?

Postby bob turner » Mon Feb 19, 2018 2:17 pm

Here is the original ugly, with a little rattle can paint and some fingernail polish:

DSC02563.JPG
DSC02563.JPG (779.68 KiB) Viewed 6091 times


DSC02562.JPG
DSC02562.JPG (875.71 KiB) Viewed 6091 times

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Is this ugly or What?

Postby Rufus T. Firefly » Mon Feb 19, 2018 2:26 pm

Looking better & better, :wink: :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Is this ugly or What?

Postby E7 » Tue Feb 20, 2018 12:31 am

Rufus T. Firefly wrote:Looking better & better, :wink: :wink:


Agreed! The red accents are small, but they add major interest.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: sleepmac and 45 guests