More dirtba - er, Doorstops

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: More dirtba - er, Doorstops

Postby rex desilets » Sun Jul 29, 2018 10:59 pm

Checked my books. The Reading G-1 was always designated G-1a. When in 1921 the fleet had superheaters added, they were re-designated G-1sa. Damned if I can figure out what/where the visible difference is. I have drawings of the G-1a and the G-1sa. The G-1a is in a book and I'm unwilling to abuse the book; however it is from a Railroad Cyclopedia of unknown date. The G-1sa drawing, right side, is on a large sheet; I can repro it in sections if you like. My photos are also in books.... :(
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Mon Jul 30, 2018 12:03 am

Thanks. This is to be a dirtbag model - no need for heroics. I am committed to a low running board both sides, with higher running board just behind the cylinders, and an air tank below the higher board.

Tonight I attached the air pumps above the lower left side running board. I suppose it would be nice to know that I am either close to correct or way off base.

The right side photo is easy to copy. The reverser went on a couple minutes ago, and tonight's project is to widen the firebox a bit and get that horizontal crease in there. The photo says class G1, #120, built in 1922, Reading shops. It seems to be light gray with black numbers, and while everyone says all Reading steam was black, by golly mine too will be gray. Photo is Carleton, page 42.

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: More dirtba - er, Doorstops

Postby rex desilets » Mon Jul 30, 2018 12:39 pm

If'n you want to lift the model somewhat above dirtbag, you really ought to buy The Reading Railroad's Mighty Pacifics, available on Amazon for $27..give this loco the care you'd give something SP.
Gray? Perish the thought. Either your photo was taken in unfavorable sunlight or it was painted photographer's gray upon delivery.
I'll PM you to get an addy for a copy of the drawing
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Mon Jul 30, 2018 1:17 pm

Ordered. Thanks for the tip.

I do several qualities of models - best are the Cab Forwards, worst are the Scale Craft resurrections. This one will be "Scale Craft" like. The Adams Diesels fall in the latter category.

My passenger cars are sort of "middle of the road" - Walthers quality is good enough, although I can still appreciate the as-yet unpainted PSC Harrimans.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Mon Aug 06, 2018 8:21 pm

Here is something I have been half-heartedly fooling with: All Nation boiler from Maroon, untouched. Frame and cylinder block from brass bar and rod. Drivers Henry Pearce. Tender Adams. Those are lost wax brass trucks!

No, it doesn’t run. I am thinking about it. Reading Pacific book should show up tomorrow to drag me away from this one.

405CF64B-4818-46A9-99EF-4D5C4ECD7087.jpeg
405CF64B-4818-46A9-99EF-4D5C4ECD7087.jpeg (354.61 KiB) Viewed 7643 times

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Tue Aug 07, 2018 6:51 pm

Yep. Book cost $14 used, free shipping. It looks brand new, and is just a gorgeous book. I have spent far more for far less!

Unfortunately, I guessed wrong on the left side. I made the running boards the same both sides, and now I have no prototype. So I shall have a one-of-a- kind G1sa. The right side is finished except for handrail posts, and I shall leave the left side with air pumps behind the air tank.

Photos soon! I am so happy with that book . . . Ecstatic!

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Tue Aug 07, 2018 6:53 pm

Oh - that Atlantic - next time it comes apart, the main frame behind the rear driver gets machined to look a little better. Somebody tell Peter that underneath there are a lot of General Models parts.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Fri Aug 10, 2018 8:28 pm

Fixed it. Here is the almost complete Reading. Cab looks a bit too high - it is, at this point, easily adjustable.

05DF7278-7B8B-4E67-A027-22E5EA0B76FF.jpeg
05DF7278-7B8B-4E67-A027-22E5EA0B76FF.jpeg (811.04 KiB) Viewed 7576 times

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: More dirtba - er, Doorstops

Postby rex desilets » Sat Aug 11, 2018 10:45 am

Gettin' closer.
The high-mounted headlight has gotta go.
Needs a new tender.
8) 8) 8)
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Sat Aug 11, 2018 12:45 pm

That is just a brass turning on a threaded pole, with Loctite to keep it upright. But my understanding is that is where the headlight was when the locomotive was delivered, along with a round number board.

Tender is Overland Mountain. Not sure at this point that I will be making a Reading tender. Check in next year. Thanks for your help - still enjoying that book! Hope that Benjamin did more like it. What a deal!

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Tue Aug 14, 2018 2:19 pm

Here is a really nicely done All Nation Mountain.

https://www.ebay.com/itm/Rare-Adams-Son ... augh&rt=nc

User avatar
John Webster
Posts: 839
Joined: Sat Feb 05, 2011 4:29 am
Location: Painesville, Ohio

Re: More dirtba - er, Doorstops

Postby John Webster » Wed May 29, 2019 8:36 pm

Any idea who made this and precisely what it is? I think it's a PRR E2.

Image

Image

Image
You begin flying with a full bag of luck and an empty bag for experience. The object is to fill the bag of experience before you empty the bag of luck.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: More dirtba - er, Doorstops

Postby bob turner » Wed May 29, 2019 8:50 pm

Medium quality scratchbuilt

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: More dirtba - er, Doorstops

Postby rogruth » Wed May 29, 2019 11:22 pm

It does have a PRR look.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: More dirtba - er, Doorstops

Postby Rufus T. Firefly » Thu May 30, 2019 8:49 am

John Webster wrote:Any idea who made this and precisely what it is? I think it's a PRR E2.


One of the E2 or E3 classes/sub-classes. Where did you run across it?

Medium quality scratchbuilt


I'd be happy to have it, :wink: :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 38 guests