Whatzit?

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Thu Sep 20, 2018 8:44 am

webenda wrote:Tabletop sculpture. The base gives it away. Why didn't you give it to us in little pieces like before?
Do you want to know the name of it and the artist or let someone else figure that out?

I could not resist using the photo in Statements, in addition to here. I thought about showing it in sections, of course, as a Whatzit, but I was eager to see who might recognize it outright, or not, because I liked the sculpture so much, as a Statement and a puzzle.

I think you are right, though. It might have been more fun to see it in pieces here (and not use it on Statements simultaneously.)

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Thu Sep 20, 2018 12:56 pm

MurphOnMillerAve wrote:
webenda wrote:Tabletop sculpture. The base gives it away. Why didn't you give it to us in little pieces like before?
Do you want to know the name of it and the artist or let someone else figure that out?

I could not resist using the photo in Statements, in addition to here. I thought about showing it in sections, of course, as a Whatzit, but I was eager to see who might recognize it outright, or not, because I liked the sculpture so much, as a Statement and a puzzle.

I think you are right, though. It might have been more fun to see it in pieces here (and not use it on Statements simultaneously.)

Over in the Statements thread, Roy identified the name of the piece as well as the artist.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Thu Sep 20, 2018 1:27 pm

Yes, he sure did. Nice.

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Thu Sep 20, 2018 1:33 pm

Whatzit?
Attachments
pta.jpg
pta.jpg (74.46 KiB) Viewed 4722 times

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: Whatzit?

Postby HONDO74 » Thu Sep 20, 2018 1:40 pm

Looks like an electrical connection on a rail

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Thu Sep 20, 2018 2:59 pm

...could be, but here's more on the main feature to consider...
Attachments
pt (2).jpg
pt (2).jpg (78.2 KiB) Viewed 4715 times

Wolf
Posts: 357
Joined: Mon Feb 16, 2015 9:47 pm

Re: Whatzit?

Postby Wolf » Thu Sep 20, 2018 10:02 pm

I'd venture that it is the rail running along the top of a maintenance pit...
the rail being held in place at intervals with clips bolted to the top of the pit wall.....
Take care,
Wolfgang

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Thu Sep 20, 2018 10:22 pm

Wolf wrote:I'd venture that it is the rail running along the top of a maintenance pit...
the rail being held in place at intervals with clips bolted to the top of the pit wall.....

Wow. Wolf, you are too cool. :D
Attachments
pt.jpg
pt.jpg (115.7 KiB) Viewed 4698 times
DSC02881.jpg
DSC02881.jpg (601.27 KiB) Viewed 4698 times

Wolf
Posts: 357
Joined: Mon Feb 16, 2015 9:47 pm

Re: Whatzit?

Postby Wolf » Sun Sep 23, 2018 2:15 pm

Murphy---
Results of an intimate relationship with pits during a large part of my
railroading career...in my last position, my Yardmaster territory included
several thousand feet of inspection pits in five buildings and three "outside"
locations....so I know my "pits"! :lol: :lol: :lol: :roll:

edited: corrected transposed letters.
Take care,
Wolfgang

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Sun Sep 23, 2018 8:42 pm

Wolf wrote:Murphy---
Results of an intimate relationship with pits...

Wolf, what can you say about rail pits?

The one in the image seems a dirty, crumbling hole in the ground built to the wrong depth. It looks like water leakage has been a problem perhaps leading to mechanics working up to their ankles in water. Lighting and fume extraction looks poor. I see no safety railings to keep people from falling into the pits.

This one is not the Whatzit inspection pit. I use it to illustrate some of the things I think of when I see inspection pits.
Image

What kind of things that would be of concern can be found looking at the bottom side of engines and cars?
Last edited by webenda on Sun Sep 23, 2018 10:41 pm, edited 1 time in total.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Whatzit?

Postby Rufus T. Firefly » Sun Sep 23, 2018 9:54 pm

webenda wrote:
Wolf wrote:Murphy---
Results of an intimate relationship with pits...

Wolf, what can you say about rail pits?

The one in the image seems a dirty, crumbling hole in the ground built to the wrong depth. It looks like water leakage has been a problem perhaps leading to mechanics working up to their ankles in water. Lighting and fume extraction looks poor. I see no safety railings to keep people from falling in the pits.


A nasty dirty job..........best suited for short people, :wink: Safety railings would have to be removable or collapsible.

What kind of things that would be of concern can be found looking at the bottom side of engines and cars?


Every possible fault with wheels and trucks; framing, electrical, brake systems, and the list rattles on and on.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Mon Sep 24, 2018 12:15 am

Whatzit?
(P.S. I'm taking a chance with this one.)
Attachments
a.jpg
a.jpg (80.85 KiB) Viewed 4632 times

User avatar
Roy
Posts: 7849
Joined: Mon Aug 09, 2010 8:48 pm
Location: Lakewood, CA

Re: Whatzit?

Postby Roy » Mon Sep 24, 2018 12:19 am

Looks like you're turning the tread on a car wheel.
Torturers, White Racists, Gay Bashers, Rich Psychopaths.

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Mon Sep 24, 2018 12:28 am

Roy wrote:Looks like you're turning the tread on a car wheel.
Attachments
b.jpg
b.jpg (110.23 KiB) Viewed 4630 times

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Mon Sep 24, 2018 2:44 am

Roy got it, didn't he?

What do you want us to say, "Railroad Wheel Lathe?"

Or do you need us to be more specific and state, "Right Head Stock of a 92" x 120" NILES Railroad Dual Headstock Wheel Lathe?"
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: Google [Bot] and 86 guests