Whatzit?

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Wed Oct 10, 2018 7:49 pm

webenda wrote:
MurphOnMillerAve wrote:To pay you the respect of replying to your assertion/question about "worshipping" the Blessed Mother/ Mary, and that nowhere is that taught/prescribed in Scripture, let me assure you that you are absolutely correct. She is not worshipped.
Murph

WORSHIP
The rendering of reverent honor or homage.

I am so happy to read, "She is not worshipped." Thank you Murph. I don't think everyone understands such worship is forbidden.

From His Cross, Jesus , in speaking to John, gave us to her (note "her" is not capitalized by me. here), Mary, and gave her to all of us. As our mother, we can go to her for intercession with her Son.

Thus, she is our Blessed Mother.

We honor her as anybody would their mother.
Last edited by MurphOnMillerAve on Wed Oct 10, 2018 8:11 pm, edited 1 time in total.

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: Whatzit?

Postby chuck » Wed Oct 10, 2018 8:02 pm

That was the second PA-1, the one Doyle McCormick didn't want. It was delivered to the Museum of the American Railroad in Frisco, Texas. They are working on restoring it to it's original ATSF glory, originally just a cosmetic restore but now they are working on getting it functional. The one up in Oregon was restored to the Nickel Plate Road Blue Bird scheme. Both engines started out life as ATSF loco's and then were sold and rebuilt by the D&H. They wound up in Mexico, not New Mexico, real Mexico. Both were wrecked in Mexico and the Smithsonian and Doyle McCormick bought the wrecks and repatriated them to the US. McCormick's interior restoration to his unit is back to what the engine was like when it was reworked for D&H. Technically it would be closer to a PA-4 than a PA-1. The Texans are hoping to get it back to a PA-1 with as much ALCO guts as possible. The web site for NKP -190 is about a year out of date. I know the prime mover is working and I thought they had the traction motors installed and were working on the electric controls. Engine is fully cosmetically restored and participated in a photo op in May 2014 at Spencer, NC. She posed with a bunch of other E and F units at the roundhouse. She is on display at the Rail Heritage Center in her home in Portland, OR.

Nothing to do with trains:

Image
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Wed Oct 10, 2018 8:15 pm

Chuck , it looks like a mouth or an orifice of a sea creature , perhaps like a starfish, or a coral.

And Thank You, for all that history about the ALCO photo Whatzit.

User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: Whatzit?

Postby robert. » Wed Oct 10, 2018 8:17 pm

A bronze Pegasus with Bellerophon
I spend entirely too many hours a day tying my shoes

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: Whatzit?

Postby chuck » Wed Oct 10, 2018 8:19 pm

Totally inorganic. And that's the whole image, no cropping or editing.
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: Whatzit?

Postby robert. » Wed Oct 10, 2018 8:37 pm

A window's 10 virus.
I spend entirely too many hours a day tying my shoes

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: Whatzit?

Postby chuck » Wed Oct 10, 2018 8:41 pm

LOL, really. :mrgreen:
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Wed Oct 10, 2018 8:56 pm

MurphOnMillerAve wrote:
webenda wrote:
MurphOnMillerAve wrote:True dat. :D

What is the story behind your flying ALCO PA Whatzit?

I don't have anything beyond that amazing photo. I edited it into pieces for a bit of fun, but I was hoping you and your investigative powers could expand our view of the event. I just had to share it, though, here, finding it so amazing a thing to see a photo of.
Murph

OK.

I hope you like this answer better than the answer to the last challenge you gave me.

The grain elevators were on the news four months ago.
Frisco to demolish grain silos
By Lindsey Juarez | 8:07 pm May 17, 2016 CDT

The grain elevator in your photo looks the same as the one on the news, so that establishes the location, Frisco, Texas (maybe.)

I drove over to Frisco in the Google Streets car and found the elevators to double check they were the same elevators.
Image
The metal ones were gone but the concrete one is still there. Location confirmed but the locomotive was not there.

Found a photo of the ALCO PA on
Image
Image copyright Mike Bates

Possible history of this locomotive.
The ALCO PA was an ATSF unit sent to Mexico.
When it was repatriated from Mexico the plan was for it by restored by Doyle as an ATSF Warbonnet for the Smithsonian museum but the Smithsonian sold it to The Museum of the American Railroad in Dallas, TX, who plans to restore her to ATSF colors.
The museum had too much stuff for their location in Dallas and was lured to a bigger site by the city of Frisco, TX.
Your photo shows the PA being unloaded at Frisco.

The museum said of the move, "The most frequently asked questions pertain to how much of the collection will go to Frisco and when they will start moving. The short answer is that everything goes and the process will begin to take place in about a year. The museum rosters just over 2,600 feet of rolling stock when coupled together in one continuous train. There is no track at the site presently; however proximity to the BNSF Main Line makes rail access relatively easy. We are planning to lay approximately 4,000 feet of track at the new 12.34 acre site in Frisco as part of Phase I construction."

Rolling stock was not the only thing they moved to Frisco.
Image
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: Whatzit?

Postby chuck » Wed Oct 10, 2018 9:05 pm

D&H actually sold 4 PA's to Mexico. One of the remaining units in Mexico is still operational and the other is a museum piece. We got back the two that were wrecked in a derailment. BTW, neither shell came back with running gear or prime movers, just the cab shells.
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Wed Oct 10, 2018 9:07 pm

MurphOnMillerAve wrote:Chuck , it looks like a mouth or an orifice of a sea creature , perhaps like a starfish, or a coral.

And Thank You, for all that history about the ALCO photo Whatzit.

Well! Chuck beat me to the ALCO story but I had fun researching it.

Chuck's image looks like a high altitude balloon bursting.
Last edited by webenda on Wed Oct 10, 2018 9:09 pm, edited 1 time in total.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Wed Oct 10, 2018 9:09 pm

chuck wrote:D&H actually sold 4 PA's to Mexico. One of the remaining units in Mexico is still operational and the other is a museum piece. We got back the two that were wrecked in a derailment. BTW, neither shell came back with running gear or prime movers, just the cab shells.


Thank you, Chuck. I got my information from google search and second or third hand train site chit-chat.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: Whatzit?

Postby chuck » Wed Oct 10, 2018 9:16 pm

You're very welcome. I'm trying to find the original NKP-190 site. It had a lot of info and a photo album timeline. It seems to be MIA. The shells came back on flat cars.

It should be at www.nkp190.com. That cough's up an error. The archive.org site has SOME of the old material but it's incomplete. Early photo albums are just thumbnails and even those are showing a lot of broken image icon's. Not sure what's going on.
Last edited by chuck on Wed Oct 10, 2018 9:26 pm, edited 1 time in total.
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: Whatzit?

Postby chuck » Wed Oct 10, 2018 9:45 pm

Wayne's post
Chuck's image looks like a high altitude balloon bursting.


Yep, it burst at 22 miles (The caption was quoting 72 miles but I think they got feet and meters confused, there were no scalar dimensions, just 120,000 "something"). I tried a couple of different values and feet to miles yields something reasonable :D
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
MurphOnMillerAve
Posts: 18489
Joined: Fri Jul 18, 2008 10:18 pm
Location: Kennywood Park
Contact:

Re: Whatzit?

Postby MurphOnMillerAve » Wed Oct 10, 2018 9:59 pm

chuck wrote:
Wayne's post
Chuck's image looks like a high altitude balloon bursting.


Yep, it burst at 22 miles (The caption was quoting 72 miles but I think they got feet and meters confused, there were no scalar dimensions, just 120,000 "something"). I tried a couple of different values and feet to miles yields something reasonable :D

Huh? Wha' ? Are you two messin' with our heads?

User avatar
webenda
Posts: 15429
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Whatzit?

Postby webenda » Wed Oct 10, 2018 10:03 pm

chuck wrote:You're very welcome. I'm trying to find the original NKP-190 site. It had a lot of info and a photo album timeline. It seems to be MIA. The shells came back on flat cars.

It should be at http://www.nkp190.com. That cough's up an error. The archive.org site has SOME of the old material but it's incomplete. Early photo albums are just thumbnails and even those are showing a lot of broken image icon's. Not sure what's going on.

I think the site shut down with closing of Daylight & Co.
NKP190 moved over to the Oregon Rail Heritage Center (ORHC.)
I don't know where NKP190 is today, it is not listed on ORHC's web site.
http://www.orhf.org/uncategorized/eveni ... 90/#more-'

There are a few NKP190 photos on Flickr.
Image
https://www.flickr.com/photos/tags/nkp190
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: No registered users and 57 guests