Smoky Mountain 70-Ton Flat Car

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
RDSRR
Posts: 932
Joined: Fri Aug 14, 2009 11:06 pm

Smoky Mountain 70-Ton Flat Car

Postby RDSRR » Sun Dec 16, 2018 2:03 pm

Just about finished my Smoky Mountain Model Works AAR 53' 6", 70-Ton Flat Car. I used a wood deck in place of the supplied urethane deck. Being what I call a "runner" on the layout I used Kadee couplers for switching. Decals from Protocraft.
Working on the loads now.
Attachments
PM16832_1.jpg
PM16832_1.jpg (302.54 KiB) Viewed 6232 times
PM16832_2.jpg
PM16832_2.jpg (274.73 KiB) Viewed 6232 times
Regards,

Dan

The Model Railroad Resource LLC
407 East Chippewa St - Dwight, IL 60420
Voice 815.584.1577 / FAX 800.783.0127
daniel@modelrailroadresource.com / http://modelrailroadresource.com
http://oscaleresource.com/ and http://sscaleresource.com/

sleepmac
Posts: 658
Joined: Sun Nov 22, 2015 4:10 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby sleepmac » Sun Dec 16, 2018 4:48 pm

Dan, very nice!

Dan Weinhold

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby 2railjon » Mon Dec 17, 2018 7:50 am

Beautiful!
Question if you would, do you apply decals to gloss paint and then Dullcote it?
Running that red block Charlie.

User avatar
RDSRR
Posts: 932
Joined: Fri Aug 14, 2009 11:06 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby RDSRR » Mon Dec 17, 2018 8:56 am

2railjon wrote:Beautiful!
Question if you would, do you apply decals to gloss paint and then Dullcote it?


Mostly. I only use Scalecoat on rolling stock which gives me the great glass finish ready for decals. I stopped using Dullcote years ago after Matthew Forsyth suggested Krylon 1311 matte spray. I really like it right out of the rattle can. Decals and I have a love hate relationship but this turned out very well.

PM16832_3.jpg
PM16832_3.jpg (71.5 KiB) Viewed 6175 times
Regards,

Dan

The Model Railroad Resource LLC
407 East Chippewa St - Dwight, IL 60420
Voice 815.584.1577 / FAX 800.783.0127
daniel@modelrailroadresource.com / http://modelrailroadresource.com
http://oscaleresource.com/ and http://sscaleresource.com/

User avatar
Rufus T. Firefly
Posts: 42220
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Smoky Mountain 70-Ton Flat Car

Postby Rufus T. Firefly » Mon Dec 17, 2018 11:54 am

RDSRR wrote:I stopped using Dullcote years ago after Matthew Forsyth suggested Krylon 1311 matte spray. I really like it right out of the rattle can.


Similarly, I also discontinued using Dullcote years ago and switched to Rustoleum matte spray, and also right out of the rattle can.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby R.K. Maroon » Mon Dec 17, 2018 1:00 pm

Nice finish work on the deck, Dan. Any tips there to share on how you approached that?

Jim
The link below any photo will display the image full size

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby bob turner » Mon Dec 17, 2018 1:33 pm

Nice decals.

I have been having trouble with Krylon and Rustoleum - mostly nozzle and propellant problems. I have found that "Dupli-Color, while twice as expensive, puts out a nice even spray pattern and allows me to use all the paint even after a couple years between spray jobs.

Krylon was really, really good right up into the 1990s, but now not worth the effort. Rustoleum made it to about 2010 before dropping the ball.

They hire the same kind of people that Hotmail hires: "Let's keep changing things until nobody knows what is going on!"

User avatar
RDSRR
Posts: 932
Joined: Fri Aug 14, 2009 11:06 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby RDSRR » Mon Dec 17, 2018 1:57 pm

R.K. Maroon wrote:Nice finish work on the deck, Dan. Any tips there to share on how you approached that?

Jim

I cut the wood to length using the urethane deck as a guide around the T section. I found some great "recipes" for staining wood. Here is a link: https://www.rustystumps.com/RSSMDownloa ... ipwood.pdf

I used the dull gray version. Once applied to the car it's all Pan Pastels simply worked in with a stiff brush till I thought it looked right.
Regards,

Dan

The Model Railroad Resource LLC
407 East Chippewa St - Dwight, IL 60420
Voice 815.584.1577 / FAX 800.783.0127
daniel@modelrailroadresource.com / http://modelrailroadresource.com
http://oscaleresource.com/ and http://sscaleresource.com/

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby R.K. Maroon » Mon Dec 17, 2018 4:21 pm

Thank you, Dan -- Great link. The articles are very informative (be sure to get part 2 by going to the rusty stumps home page). I was also unaware of the O-scale detail parts they sell. Lots of neat detail items.

Jim
The link below any photo will display the image full size

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby rex desilets » Mon Dec 17, 2018 6:37 pm

Good job!
Since the car is resin, do you intend to run it empty? If not, have you added bracing underneath?
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

User avatar
RDSRR
Posts: 932
Joined: Fri Aug 14, 2009 11:06 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby RDSRR » Mon Dec 17, 2018 6:55 pm

rex desilets wrote:Good job!
Since the car is resin, do you intend to run it empty? If not, have you added bracing underneath?


The kit includes a weight that fits into the sill. However, I am working on a tractor load. I build up all the chocks based on an old AAR spec. Next is the chain... The tractors are 1947 models and since I model 1947 well it works!

PM5.jpg
PM5.jpg (443.06 KiB) Viewed 6126 times
Regards,

Dan

The Model Railroad Resource LLC
407 East Chippewa St - Dwight, IL 60420
Voice 815.584.1577 / FAX 800.783.0127
daniel@modelrailroadresource.com / http://modelrailroadresource.com
http://oscaleresource.com/ and http://sscaleresource.com/

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby bob turner » Mon Dec 17, 2018 8:01 pm

1947 was a good year. Once we get past about 1965 I am no longer interested - in trains, cars (except for my wife's 635csi) and airplanes. Oh, I guess I did like the Airbus, but you gotta admit it looks like a big engined 737.

User avatar
RDSRR
Posts: 932
Joined: Fri Aug 14, 2009 11:06 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby RDSRR » Mon Dec 17, 2018 11:04 pm

Chain came from Clover House. Note that is not round like some. A bit heavy bit it will work.

chains.jpg
chains.jpg (483.73 KiB) Viewed 6101 times
Regards,

Dan

The Model Railroad Resource LLC
407 East Chippewa St - Dwight, IL 60420
Voice 815.584.1577 / FAX 800.783.0127
daniel@modelrailroadresource.com / http://modelrailroadresource.com
http://oscaleresource.com/ and http://sscaleresource.com/

User avatar
RDSRR
Posts: 932
Joined: Fri Aug 14, 2009 11:06 pm

Re: Smoky Mountain 70-Ton Flat Car

Postby RDSRR » Mon Dec 17, 2018 11:24 pm

OK, I know that most farm equipment was strapped and not chained but... what are you going to do :mrgreen:
Regards,

Dan

The Model Railroad Resource LLC
407 East Chippewa St - Dwight, IL 60420
Voice 815.584.1577 / FAX 800.783.0127
daniel@modelrailroadresource.com / http://modelrailroadresource.com
http://oscaleresource.com/ and http://sscaleresource.com/

User avatar
Rufus T. Firefly
Posts: 42220
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Smoky Mountain 70-Ton Flat Car

Postby Rufus T. Firefly » Tue Dec 18, 2018 8:53 am

RDSRR wrote:......... was strapped and not chained but... what are you going to do :mrgreen:


O tempora! o mores! Ok, it's not really a problem these days as long as it's between consenting adults, :mrgreen:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 38 guests