Union Pacific Monster type 4-12-2

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Tue Jan 15, 2019 2:10 pm

So, $40 more for plugs and clamps. Thanks, Wiseman. Now I will find my stash.
I don't have a portrait of the model at its current stage, but here is a thumbnail. You have to see Jay's Gresley lever castings to appreciate them. The rest of the model will only come close to a fraction of their accuracy.

image.jpeg
image.jpeg (84.63 KiB) Viewed 6314 times

up148
Posts: 4800
Joined: Sat Nov 01, 2008 11:52 am

Re: Union Pacific Monster type 4-12-2

Postby up148 » Tue Jan 15, 2019 3:05 pm

Maybe some photos - I would swear I posted the photos of the Lionel version here, but cannot (agan, finicky search routine) find them.


You did Bob, although I can't find them either.

I should have thought about this much earlier, but you know how that goes. Anyway, here is a very useful link on the 9000's, with numerous photos of "in service" locos, taken by the masters. Just click on the road number on the left.

http://www.northeast.railfan.net/up9000.html

BH

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Tue Jan 15, 2019 7:15 pm

Thanks! I am delighted with the Kratville book. Ten minutes after I ordered the clamps and plugs, I found my cache. Tonight will be light the torch time.

I will re- post the Lionel photos. Wouldn't mind photos of Sunset and Kohs . . .

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: Union Pacific Monster type 4-12-2

Postby Jay Criswell » Tue Jan 15, 2019 8:09 pm

Bob,

You mean these. I forgot all about them.

2015-03-08 001 2015-03-04 004.JPG
2015-03-08 001 2015-03-04 004.JPG (1005.62 KiB) Viewed 6291 times
2015-03-08 001 2015-03-04 003.JPG
2015-03-08 001 2015-03-04 003.JPG (1 MiB) Viewed 6291 times
2015-03-08 001 2015-03-04 002.JPG
2015-03-08 001 2015-03-04 002.JPG (1.46 MiB) Viewed 6291 times
2015-03-08 001 2015-03-04 001.JPG
2015-03-08 001 2015-03-04 001.JPG (1.48 MiB) Viewed 6291 times


Jay

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Tue Jan 15, 2019 10:13 pm

Not me - I will never forget your generosity, but also these things make a Greeley model!

Greeley! Gresley! God I hate this spelling correction.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Tue Jan 15, 2019 10:47 pm

Lionel revisited:

DSC02478.JPG
DSC02478.JPG (664.77 KiB) Viewed 6279 times


DSC02475.JPG
DSC02475.JPG (686.78 KiB) Viewed 6279 times

sleepmac
Posts: 658
Joined: Sun Nov 22, 2015 4:10 pm

Re: Union Pacific Monster type 4-12-2

Postby sleepmac » Wed Jan 16, 2019 10:29 am

Bob, that is one brute of a locomotive.

Dan Weinhold

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Union Pacific Monster type 4-12-2

Postby E7 » Wed Jan 16, 2019 2:26 pm

bob turner wrote:Greeley! Gresley! God I hate this spelling correction.


I won't BUG you after this because I really don't care, but if you would download the Firefox browser, it's spelling correction would underline what it considers to be mistakes in red, but you, the author must make the change.

Rich
Last edited by E7 on Wed Jan 16, 2019 3:14 pm, edited 1 time in total.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Wed Jan 16, 2019 3:10 pm

I guess I have that on the other iPad. This one is more advanced and more difficult to use. Try disabling the “undo”key on a recent iPad. I can type “Gresley” all day long, and it changes it to Greeley. It seems to have learned, though, after I forcibly changed it.

All washouts are in, and I had exactly the right number of lag clamps. One of them slipped out of the tweezers, so I await Wiseman or a Greek eyeball to finish this phase. On to turret and piping.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Union Pacific Monster type 4-12-2

Postby E7 » Wed Jan 16, 2019 3:13 pm

Looks pretty good for a Lionel, but I will NEVER go there until/unless they make a true 2 rail model (and maybe even not then). Does it have your pet peeve "U" shaped boiler? :lol: :lol: :lol:

Apart from all that, it is confirmation that most "O" Scalers and Gaugers will bemoan the lack of available space, and then go out and buy the LARGEST engine they can find :lol: :lol: :lol: :lol: Can she git around a 36 inch radius? :mrgreen: :lol: :lol: :lol:

Must be the Winter of my Discount Tent! :mrgreen: :lol: :lol: ala Red Green

Rich

PS: Too Bad More Roads didn't have Triplexes!!! :mrgreen:

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Wed Jan 16, 2019 8:14 pm

Lionel has done some interesting things lately. I cannot speak to most, but this monster and the FEF are in my possession, and are really, really close to scale, including boiler bellies. They lose it in the wheels, couplers, tailbeam - those kinds of places.

The PA Diesel is a plastic work of art - better than MTH, and I had a brief opportunity to compare the MTH with Key, and thought MTH did spectacularly well. I don't model in plastic, so these are only good for me if I want to spend the bucks to convert to metal.

I have 74" radius, and so far everything except a Daylight articulated coach can make it. I have no idea what the Lionel can do, but it would look silly long before it jumped the track.

I found a beat-up lag clamp, so the 4-12-2 is on track for final details. I will do turret, pops, generator, reverser, and Worthington pumps this evening. Retirement is such fun - in between all this I changed a cylinder, installed an oversize exhaust stud, and re-lined some brakes at the airport. And got to test-fly it!

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Union Pacific Monster type 4-12-2

Postby E7 » Thu Jan 17, 2019 12:01 am

bob turner wrote:I have 74" radius, and so far everything except a Daylight articulated coach can make it. I have no idea what the Lionel can do, but it would look silly long before it jumped the track.


How many BLIND drivers? Can't tell from the image. While we're on the subject, any blind drivers on the real thing...I'm guessing 0, but both you and Butch have forgotten more about western steam than I ever knew!

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: Union Pacific Monster type 4-12-2

Postby Jay Criswell » Thu Jan 17, 2019 12:34 am

It is my understanding, the prototype had one blond driver when built in the beginning but later production locos didn't. I think UP retrofitted them with all driver being flanged when tires were replaced for maintenance.

Jay

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Thu Jan 17, 2019 1:54 am

Blond? Plus one on Jay's info.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: Union Pacific Monster type 4-12-2

Postby Jay Criswell » Thu Jan 17, 2019 6:43 am

Oops! Blind, apparently, just like me. Guessing you knew what I meant. Auto-correct doesn't always work.

Back to the subject at hand, the original drawing showed one blind driver but Alco came up with a design that provided quite a bit of lateral movement of the drivers and it was determined all drivers would be flanged. True? Can't swear to it but it sounds right.

Jay


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 38 guests