Latest Butt-Ugly 2Rail Conversion!
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Ouch! Got me!!
Jay
Jay
Re: Latest Butt-Ugly 2Rail Conversion!
Jay, that came out wrong so I fixed it!
absolutely no hurry here!
Running that red block Charlie.
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Jon,
Nothing to fix bud. I was just making light of the fact, I have the parts, required to finish is sitting here instead of there, with you.
We're good!
Jay
Nothing to fix bud. I was just making light of the fact, I have the parts, required to finish is sitting here instead of there, with you.
We're good!
Jay
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Small hiccup! Turns out the wheels on this model are 42". Luckily I have some from Overland I didn't throw away. These wheels are meant for the infamous 4.5mm axles and the model has 3/16". New axles with slightly more than .010" removed to create a 4.5mm shoulder and we might be good to go. Right now only one axle is driven and I'm not liking it. Thought about delrin sprockets and chain but I'd have to remove some of the hub and these things are already notorious for splitting. Remove part of the hub, like All-Nation did and you're just asking for trouble.
Thinking about O Ring belts. I have the forming tool to make the pulleys. I could at least get 2 out of 3 axles powered. Without a whole new drive it will never pull much. May go with this for now and see how JB likes it.
Jay
Thinking about O Ring belts. I have the forming tool to make the pulleys. I could at least get 2 out of 3 axles powered. Without a whole new drive it will never pull much. May go with this for now and see how JB likes it.
Jay
Re: Latest Butt-Ugly 2Rail Conversion!
The O-ring drive to the second axle sounds like a perfect solution to the nightmare I sent you! From factory only two axles are powered to begin with and I’d be thrilled to achieve that! If you can put the two axle gears on a lathe and use a small round file to run a channel for the O-ring that might work turning it into a pulley.
Running that red block Charlie.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Not enough room for a tooth belt? Measure the wheelbase, and I will measure the K-Line TM, which has gears on all axles and was trivial to 2-rail.
Re: Latest Butt-Ugly 2Rail Conversion!
Just to give y’all an idea of what a monster the Transfer diesel was, here it’s sitting next to a UP 4-12-2.


Running that red block Charlie.
Re: Latest Butt-Ugly 2Rail Conversion!
I remember the real things pulling coal trains through my home town.
Pennsy used two 2-10-0s on those trains but only one of these.
The first ones I saw were Limas and then the Baldwins.
Speed was not a problem. It was limited to 25 on this line.
By the way, most PRR treidgt trains had a 50 mph limit everywhere.
Yes there were exceptions.
Pennsy used two 2-10-0s on those trains but only one of these.
The first ones I saw were Limas and then the Baldwins.
Speed was not a problem. It was limited to 25 on this line.
By the way, most PRR treidgt trains had a 50 mph limit everywhere.
Yes there were exceptions.
roger
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Latest Butt-Ugly 2Rail Conversion!
No Bob, there is not. If there was I already would have done so.
It isn't just the wheelbase, it's the total package. Adapting K-Line, or any other, probably ain't worth the effort.
Jay
It isn't just the wheelbase, it's the total package. Adapting K-Line, or any other, probably ain't worth the effort.
Jay
Re: Latest Butt-Ugly 2Rail Conversion!
Roger, I would have loved to see them in action!
Thanks for sharing!
Thanks for sharing!
Running that red block Charlie.
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Jon, It probably won't pull much more than the crane. Who knows, might not pull itself. Anyway, o-ring belts connecting one axle per truck to another. Gives you 4 wheels total. Because they really aren't all that robust let's say 3 wheels per truck are powered. Using a slightly thicker o-ring may help but remember the tighter it is the more resistance in the drive.
To keep the geared axle from slamming back forth I added Delrin washers between the worm gear and the frame. You can remove them, if you'd like. There is enough lateral movement in the other axles to provide for tight radius curves.
I've given the trucks, bearings, gears, etc. zero lubrication. I know you can deal with it.







The leftovers

The o-rings I used. I'll send a couple of extras.

Okay, from this day forward, I disavow all knowledge of, or involvement in, this project!
To keep the geared axle from slamming back forth I added Delrin washers between the worm gear and the frame. You can remove them, if you'd like. There is enough lateral movement in the other axles to provide for tight radius curves.
I've given the trucks, bearings, gears, etc. zero lubrication. I know you can deal with it.







The leftovers

The o-rings I used. I'll send a couple of extras.

Okay, from this day forward, I disavow all knowledge of, or involvement in, this project!
-
J. S. Bach
- Posts: 5820
- Joined: Wed May 16, 2007 9:30 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Jay Criswell wrote:Jon, It probably won't pull much more than the crane. Who knows, might not pull itself. Anyway, o-ring belts connecting one axle per truck to another. Gives you 4 wheels total. Because they really aren't all that robust let's say 3 wheels per truck are powered. Using a slightly thicker o-ring may help but remember the tighter it is the more resistance in the drive.
To keep the geared axle from slamming back forth I added Delrin washers between the worm gear and the frame. You can remove them, if you'd like. There is enough lateral movement in the other axles to provide for tight radius curves.
I've given the trucks, bearings, gears, etc. zero lubrication. I know you can deal with it.
et al
Okay, from this day forward, I disavow all knowledge of, or involvement in, this project!
AH, but you left a photographic trail!!
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Musta been one of them photoshop deals.
Jay
Jay
-
J. S. Bach
- Posts: 5820
- Joined: Wed May 16, 2007 9:30 pm
Re: Latest Butt-Ugly 2Rail Conversion!
Jay Criswell wrote:Musta been one of them photoshop deals.Jay
Re: Latest Butt-Ugly 2Rail Conversion!
Awesome work, Jay!!! Thank you!!!

Running that red block Charlie.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: sleepmac and 57 guests