Machine Shop / Locomotive Drive Work

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Machine Shop / Locomotive Drive Work

Postby E7 » Mon Nov 18, 2019 4:15 pm

R.K. Maroon wrote:Bob -- The attraction of an ATSF ABA set is undeniable, and that is something to consider. Jim


I could be wrong, but I think he wants more PA's

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Machine Shop / Locomotive Drive Work

Postby Rufus T. Firefly » Mon Nov 18, 2019 4:43 pm

R.K. Maroon wrote:That raises the question of where the line is between a good collection of spares and a pile of never-to-be-used parts.


Odds are if you have to ask, you've already crossed it already, :mrgreen:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Machine Shop / Locomotive Drive Work

Postby bob turner » Mon Nov 18, 2019 7:57 pm

A while back I was looking for nose castings. I was going to inventory my parts, but I now have a wing in the garage, and cannot get to the PA drawer without opening the main door or crawling under. I think I will sit here and sip coffee.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Machine Shop / Locomotive Drive Work

Postby rogruth » Mon Nov 18, 2019 9:24 pm

This is probably an inappropriate question but it sort of nags at me when I read the above type of posts.
How old are you guys?
Why do I ask? You talk of the long lines of work, in the hobby, you have to do. I marvel at what you do and how well it is done.
I am 85 and my fingers and eyes have not allowed me to do the type of work that you do for @ 25 years.
It really doesn't make any difference what you ages are I am in awe of the work you do.

I'm sure you all realize this is not directed at any one person but at all that take part in the O Scale Forum.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Machine Shop / Locomotive Drive Work

Postby bob turner » Mon Nov 18, 2019 10:48 pm

78 1/2. But I hang out with a younger crowd, and almost daily climb up into the front seat of a WWII biplane. Also the Greek watches my diet - I am a thwarted cookie monster.

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: Machine Shop / Locomotive Drive Work

Postby R.K. Maroon » Mon Nov 18, 2019 11:08 pm

Roger, I am 61 and, not to jinx myself, healthy enough to where I expect that I will complete at least some of the projects in the queue before things go south. I do not harbor any false hope of getting them all done, though. To paraphrase my brother Pete, any new project I let in the front door just pushes one I already have out the back door.

But back now to fixing up a pair of CLW cast PAs, which is the current project (and one I hope to complete). If you have been following along, I have paired up a matching "all original" A and B unit and a similarly matched AA set for future assignments. That leaves two A units, which is what I need. First, unit #2:

Image

As can be seen, somebody carved out the forward air intake but never got around to replacing it. Less obviously, they carved out the rear radiator vent on the sides and replaced it with a casting for this vent from a later CLW PA. It's a nice dress-up, but whoever did the work failed to get the piece flush with the car side. Also, you can still see the solder from a drip-rail over the cab side window. The drive is from a later CLW PA, but the truck side frames are original. This installation required a custom bolster assembly. The later frame is not a drop-in replacement for the original drive setup. The original modification to the shell to accept the new frame was not robust, so it will need some rework.

Finally, here is unit #4:

Image

Note that the original side marker light housings have been partially cut down (the last bit to get them flush is the challenge). This unit came with an original drive, but one that is not in particularly good shape. As it is, I am in possession of a complete chassis from a later CLW PA. This chassis, which is shown with the unit in the photo above, has the earlier brass gearboxes, open-frame motor, and sprung trucks.

Here is an underside shot of these two shells:

Image

Note the bolting flange between nose and roof on the left unit (bottom left of photo) is missing from the right unit, and that the solder job on the right unit is a good bit messier than the job on the left. All evidence suggests that the left unit (like its other clean-assembly brethren) is a factory-assembled shell while the shell on the right is a very early modeler-assembled shell.

So these units don't match each other nor do either match any other unit on the roster. That makes them good candidates for the T&NO or Cotton Belt assignments, which call for single units. One thing they will have in common though are missing dynamic brake units, as neither the T&NO or the Cotton Belt PAs had these. Machining these off the roof castings will be the next step.

Jim
The link below any photo will display the image full size

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Machine Shop / Locomotive Drive Work

Postby up148 » Tue Nov 19, 2019 2:39 pm

Received the new MIcro Mark catalog today. Normally I just toss it in the trash as there is nothing new and prices just go up with every issue. But today's had some new items including that they are now selling Sherline mills and lathes. Still carry their own brand and Unimat for less money, but have several pages of Sherline offerings. Prices are not for the faint of heart. :shock:

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Machine Shop / Locomotive Drive Work

Postby E7 » Tue Nov 19, 2019 8:08 pm

bob turner wrote:A while back I was looking for nose castings. I was going to inventory my parts, but I now have a wing in the garage, and cannot get to the PA drawer without opening the main door or crawling under. I think I will sit here and sip coffee.


Smartest thing you've said in ages! If I was closer I'd come over and join you! I am baking a cherry pie as I type this, but it would be way cold by the time I got there! :lol: :lol: :lol: :lol: :mrgreen:

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Machine Shop / Locomotive Drive Work

Postby bob turner » Tue Nov 19, 2019 10:40 pm

O scale requires good machinery. Minimum would be the modern "flat way" Atlas 6" lathe. Better is a 9" South Bend. And a Benchmaster mill is barely up to the job of maling brass main frames.

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: Machine Shop / Locomotive Drive Work

Postby rex desilets » Tue Nov 19, 2019 11:33 pm

helps to have an entire hanger..
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Machine Shop / Locomotive Drive Work

Postby bob turner » Wed Nov 20, 2019 1:15 am

Yes, but the 11" Sheldon, big drill press, Benchmaster, and now a wing and a compressor, are in the small garage with washer, dryer, and what looks like provisions for the apocalypse. Yippee.

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Machine Shop / Locomotive Drive Work

Postby up148 » Wed Nov 20, 2019 9:00 am

If a guy doesn't have room for larger equipment and more permanently installed, is there really any difference between the Sherline and Unimat? Are there other better brands than Sherline and Unimat that wouldn't overwhelmingly a single bay garage? I would expect tolerances to be better on the Sherline, but maybe not. Garage has to be used for hobby and woodworking projects, so equipment needs to be either smaller or somewhat portable so it can be moved out of the way.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Machine Shop / Locomotive Drive Work

Postby bob turner » Wed Nov 20, 2019 12:26 pm

This one is probably way overpriced, but you can see it is not huge. My opinion is this thing is minimum size for O Scale work. I understand that later Unimats are more rigid, but the very small lathes and mills are simply toys. You need "mass".

https://www.ebay.com/itm/Atlas-Lathe-10 ... SwgYpdHffu

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: Machine Shop / Locomotive Drive Work

Postby R.K. Maroon » Wed Nov 20, 2019 12:33 pm

I researched the bench-machine market a few years back and wound up buying a Taig II mini-mill:

Image

It is larger than a Sherline and has a an extended-length, extended-range table, which was very attractive for working on O-scale models. The mill comes in two pieces (base-and-table assembly and head-and-tower assembly). I was able to lift, install, and align these myself at the time I bought them (also part of the attrattraction), but if I had to move it now I would get a second person to help. I think it is the perfect size for the O-scale hobbyist who actually uses a mill but not every day and not for mass production. I am very happy with this machine.

Here are a few photos of the machine in use this week:

Image

What we have here are the lower pieces for a jig to hold a CLW cast PA to the mill table. The wood is garapa, a heavy and stout hardwood, left over from a decking project. Here is a PA mounted in the jig and ready for milling:

Image

This is one of the PAs described above that is destined for T&NO and Cotton Belt colors (Daylight colors, as it is). Neither prototype had dynamic brakes, so the cast-in units on the roof have to go. The top piece of the rear jig is pressing on the cooling fan ring, which is flat. The top piece of the front jig is pressing on the cab roof, which is curved side-to-side and slopes back-to-front. I put a 1" square piece of lead sheet between the roof and the jig, and, as hoped, it formed itself to the roof nicely, such that the pressure from the jig is spread more evenly into the shell while simultaneously providing some side-to-side and front-to-back rigidity, both important when making a profile cut.

Bronze castings (and brass castings, as with the PA) poured in an open foundry often case harden while cooling. I was a bit worried about this (especially with an untested jig), so I took a light cut to start with:

Image

The tool did not noticeably load or chatter and the cut was clean:

Image

I did not go further, as there is a hollow in the casting under this unit, such that the tool will be close to breaking through the casting as I work it down. I am going to solder in a piece of brass bar stock to fill the hollow before making any more cuts.

More soon
Jim
The link below any photo will display the image full size

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Machine Shop / Locomotive Drive Work

Postby up148 » Wed Nov 20, 2019 2:44 pm

Thanks Jim,

I really appreciate your comments and hearing from someone who's purchased and used one of these small mills means a great deal. I forgot about Taig and your experience parallels what I heard years (maybe decades) ago. Its a sizable purchase whichever machine I choose, so buying the wrong machine would be disturbing. I don't need the size machine Bob needs and it will strictly be for O scale projects. Looking forward to learning a new skill in this hobby. :D

Butch


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 45 guests