Thousand buck a piece, roughly

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Thousand buck a piece, roughly

Postby ScaleCraft » Fri Jul 10, 2020 1:57 pm

https://www.ebay.com/itm/O-Scale-Brass- ... 2213627250

I dunno. 11 pieces (including two locomotives), for ten grand plus, $400 to ship it.
"Train has never been run " so we have no idea IF it runs or IF anything is shorted.
"The rear truck of the A unit has come loose.". Just sitting on the shelf?
"Train has never been run so I guess it just happened sitting on the shelf.". Screws didn't just fall out, so solder joint(s) failure?
"The Milwaukee Dorm Baggage is a Walther’s kit and has lost its bottom stripe decals…easy fix. $5?" Maybe. But then, it won't be an expensive original?
"they have been in a controlled storage environment in my finished basement since 2014", so how did the decals come loose?

Seems like a lot of money. Designated to be a display shelf queen? Or re-worked to actually run?
"The Pacific Pullman is a model I have never seen and one of the wheels needs to be tightened to shore up the truck." How do you tighten a wheel? Shoring up a truck? Interesting.

No opinion, just sharing....
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42227
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Thousand buck a piece, roughly

Postby Rufus T. Firefly » Fri Jul 10, 2020 2:31 pm

We've seen and discussed this set before. Wasatch cars...........rarefied air.

Maybe your asking the seller those questions would prove illuminating, interesting, and entertaining.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Thousand buck a piece, roughly

Postby ScaleCraft » Fri Jul 10, 2020 2:58 pm

Rufus T. Firefly wrote:We've seen and discussed this set before. Wasatch cars...........rarefied air.

Maybe your asking the seller those questions would prove illuminating, interesting, and entertaining.


Possibly. But maybe not. Difficult, for certain. Without an active account on the bait, no way to contact the seller.
Rarified air? Yeah. Last revision date Oct 28, 2018 19:22:37 PDT.
6 Wasatch cars, one Walthers, two unknown.

I remember when they sold off Joe's UP and MILW stuff, full strings of passenger stuff.....certainly not that much money.

So what is a Wasatch car actually worth?
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42227
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Thousand buck a piece, roughly

Postby Rufus T. Firefly » Fri Jul 10, 2020 3:51 pm

ScaleCraft wrote:Without an active account on the bait, no way to contact the seller.


Why do you bother then?

So what is a Wasatch car actually worth?


To me? Whatever I can get someone else to pay me! Upwards of $800 ea to those that worship at that altar.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Thousand buck a piece, roughly

Postby ScaleCraft » Fri Jul 10, 2020 4:18 pm

Rufus T. Firefly wrote:
ScaleCraft wrote:Without an active account on the bait, no way to contact the seller.


Why do you bother then?


Because it amuses me. Sorta like some entitled brat running the new Ferrari his folks provided into a power pole.
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Thousand buck a piece, roughly

Postby bob turner » Fri Jul 10, 2020 9:36 pm

Don't knock it. Without his interest in this sort of thing, MTJ 2-Rail would not exist today. I cannot help until I figure out a replacement for Photobucket. Don't blame them for wanting $$.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Thousand buck a piece, roughly

Postby E7 » Sat Jul 11, 2020 9:44 am

Old "News". They were 20K waaaay back when they were first listed. They belonged to the seller's father as I recall. If the engine was a Key instead of OMI, 10K might not be so silly. I don't think all the cars are Wasatch, and I remember one truck on the engine is loose! :shock: I think I would try and fix that if I were hoping for 10K.

User avatar
Rufus T. Firefly
Posts: 42227
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Thousand buck a piece, roughly

Postby Rufus T. Firefly » Sat Jul 11, 2020 10:04 am

bob turner wrote:Don't knock it. Without his interest in this sort of thing, MTJ 2-Rail would not exist today.


Right...........anyone here actually building any models and posting anything of their own? Give me a list. Should not take a lot of effort as it's single digit.

I cannot help until I figure out a replacement for Photobucket. Don't blame them for wanting $$.


Trivial - Smugmug, Flickr, and a host of others. You could have and should have changed over to another service 2+ years ago. As for wanting money, there is reasonable and then there's insane greed - Photobucket is the latter.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42227
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Thousand buck a piece, roughly

Postby Rufus T. Firefly » Sat Jul 11, 2020 10:08 am

E7 wrote:Old "News". They were 20K waaaay back when they were first listed. They belonged to the seller's father as I recall. If the engine was a Key instead of OMI, 10K might not be so silly. I don't think all the cars are Wasatch, and I remember one truck on the engine is loose! :shock: I think I would try and fix that if I were hoping for 10K.


2 Overland engines and 6 Wasatch cars. Agreed - fix the loose stuff and address the rest. Can;t be bothered, then probably not caring enough to really want to sell. Reminds me of the guys at the meets with the same over-priced brass on their tables for year after year.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Thousand buck a piece, roughly

Postby E7 » Sat Jul 11, 2020 10:45 am

Rufus T. Firefly wrote:2 Overland engines and 6 Wasatch cars. Agreed - fix the loose stuff and address the rest. Can;t be bothered, then probably not caring enough to really want to sell. Reminds me of the guys at the meets with the same over-priced brass on their tables for year after year.


I think the problem??? here might be that the father said: son/daughter when I buy the farm this train is worth $XXXXX.00, and Dad was far enough off the mark that even after cutting the price in half, it is still too high. Then toss in all the other issues, and it will be sitting on that cyber table just like the ones at the meets. Pretty much 6 of one, half dozen of another.

Might be a smart move if the seller tried selling it car by car. I'm guessing there is a fairly strong market for the Wasatch stuff.

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Thousand buck a piece, roughly

Postby up148 » Sat Jul 11, 2020 11:32 am

Yeah, but you'd think after a year they'd get the message and would change their mindset. I'm sure they've had many offers and could establish from that what the set is really worth. Quality of their models doesn't justify the asking price, IMHO.

There are some nicer Wasatch car on EB right now for $1K each, which I think it top $$$. This hobby shop in Canada must have gotten a hold on some great collection, because they are offering some very nice models, but at very top prices. 8-10 years ago $1K was an average price for a painted new or like new condition Wasatch car, but not today IMHO. And there are Wasatch cars and then Wasatch cars.

You can always spot a Dan Pantera (Calumet Models) painted or updated car, and these bring top dollar if the owner took car of them. Complete interiors, with silver painted window surrounds and proper car number decals was around $300 per car. So add that to whatever car you find.......if not updated.

This market is not as strong as it once was (are any brass pieces) so even the best of the best is affected by supply and demand.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Thousand buck a piece, roughly

Postby ScaleCraft » Sat Jul 11, 2020 1:14 pm

I think I posted earlier that the last update to the listing was almost two years ago. Just put it out there and see what lands in your trap.
I had no specific comments, other than asking about pricing, which seems to have degenerated into actual modeling. Go figure.
The idea that the father said it's worth.....well, seen that. Neighbor had a 1941 Lincoln Zephyr Convertible, V-12 and all, I helped do mechanical and electrical....not quite a 100 point car, but made the cover of the Lincoln Club mag. Stated what he thought it was worth...then died.

Appraiser figured 1/3 of that. I think his three cars, 47 Olds convertible, 53 Merc convertible, and the Lincoln went for a total of less than 100K. 90K is the number I think I remember. And he'd figured 125K on just the Lincoln.

Still puzzling. Wonder how many offers the seller has turned down? No way of knowing, but you wonder sometimes.

I guess he'll just hang onto them until more trucks fall apart and more wheels need shoring up.
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Thousand buck a piece, roughly

Postby bob turner » Sat Jul 11, 2020 2:43 pm

Absolutely his right.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Thousand buck a piece, roughly

Postby ScaleCraft » Sat Jul 11, 2020 2:55 pm

Absolutely. Just like the guy who wants $24K for 5 Weaver passenger cars in pieces with no photos of the actual car.

His right.

Our rights include questioning that, unless somehow our opinion is invalid because it does not align with someone elses.

Opinion.
Dave....gone by invitation

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Thousand buck a piece, roughly

Postby up148 » Sat Jul 11, 2020 4:05 pm

The old corvette market is like all others. The valuation question comes up all the time on a major Corvette Forum and recently it was asked in another way. The question was "is the Hagerty Valuation Tool correct or is reality less"? Lots of variables to formulate values.

But the underlying fact is, just like most collectibles, old cars, model trains, old toys, (insert your collectible here) is driven by supply and demand. And, like the brass train/model train hobby, the collectible car market is falling out of favor with the younger (future buyer) generation. Our generation was into cars and model trains and ????, so IMHO, almost everything collectible today is losing value and has been for a long time. You better enjoy your hobby(s) for the enjoyment value, because one of these days resale will be nil.

But, I guess a guy can ask anything they want for what they have to sell. :shock:


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 48 guests