Car Thread

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: Car Thread

Postby robert. » Tue Nov 24, 2020 7:01 am

Watch the movie FORD V FERRARI. I don't know how true the story is. It's a fun movie even the wife liked.
I spend entirely too many hours a day tying my shoes

User avatar
healey36
Posts: 7026
Joined: Fri Sep 03, 2010 4:43 pm
Location: Westminster, MD

Re: Car Thread

Postby healey36 » Tue Nov 24, 2020 9:33 am

As good as the movie was, A. J. Baime's book Go Like Hell from a few years back offered a lot more info regarding the lead up to the confrontation between Ford and Ferrari. An interesting window to that brief time when Ford was able to muscle up on the Italians before getting crushed by Porsche and its 900-series race cars. Of course, by then, Ford had mostly lost interest.

I wish someone would write a good book on the Wood brothers and their many years in NASCAR. The stories I've heard about them are epic, especially in the early "run what ya brung" era.

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: Car Thread

Postby HONDO74 » Tue Nov 24, 2020 7:37 pm

Bringing this over to the car thread.

Image

Year ago I bought two of these. Special Edition YS-38 Models of Yesteryear 1920 Rolls-Royce Armoured Car to put on the layout

https://www.etsy.com/listing/875608812/ ... gK3mvD_BwE

Image

User avatar
healey36
Posts: 7026
Joined: Fri Sep 03, 2010 4:43 pm
Location: Westminster, MD

Re: Car Thread

Postby healey36 » Wed Nov 25, 2020 6:36 am

That’s a nice little model of the Rolls armored car. What’s your guess as to scale? Most of the original MoY production was approximately 1/64 or a bit smaller. A quarter-inch scale version of the Rolls would make a great load for a prewar tinplate flat car.

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: Car Thread

Postby HONDO74 » Wed Nov 25, 2020 7:27 pm

healey36 wrote:That’s a nice little model of the Rolls armored car. What’s your guess as to scale? Most of the original MoY production was approximately 1/64 or a bit smaller. A quarter-inch scale version of the Rolls would make a great load for a prewar tinplate flat car.


It's bigger than the armored car that was on the Flyer unloading car that was I believe 1/64,

Got it from a toy store in Branson Mo. That was kind of like a outlet store that bought out other toy stores around the country. bought alot of gorgi Military and Circus items from them also for around half the retail price. Have a lot of Solido Military also, Tanks with the metal tread. Target used to sell those in their toy departments at one time.

My idea was to used them on flat cars not just sitting on the layout. Problem is you can only get one on tinplate or post war flat cars. I bought 10 of the long K=line flat cars to 2 on each one.

At one time we had a die cast thread that I started on MTJ. I posted a lot of my diecast. Problem was it was all on photobucket. now gone.

Image

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Car Thread

Postby rogruth » Wed Nov 25, 2020 8:48 pm

Hondo,
Is that pre-war O gauge or post-war S gauge,
Looks like 3/16" scale. That is why I ask gauge.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: Car Thread

Postby HONDO74 » Wed Nov 25, 2020 9:03 pm

rogruth wrote:Hondo,
Is that pre-war O gauge or post-war S gauge,
Looks like 3/16" scale. That is why I ask gauge.


I think the picture is prewar o gauge. 3/16 The armored car was the same size pre war O or post war S I have a S gauge unloading car

User avatar
healey36
Posts: 7026
Joined: Fri Sep 03, 2010 4:43 pm
Location: Westminster, MD

Re: Car Thread

Postby healey36 » Wed Nov 25, 2020 9:18 pm

I remember the die cast thread...would be fun to start another one.

There used to be a store around here called Tuesday Morning, an outlet store that carried a lot of stuff liquidated out of various chains. Bought a lot of cool stuff in there, including some unusual diecast. The place shuttered a few years ago and I miss it, if nothing else for the entertainment...never knew what you might find.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Car Thread

Postby E7 » Thu Nov 26, 2020 10:53 pm

healey36 wrote:I wish someone would write a good book on the Wood brothers and their many years in NASCAR. The stories I've heard about them are epic, especially in the early "run what ya brung" era.


I totally agree, and I'm not all that much of a Nascar buff. I remember reading an article where they put extended tail pipes on David Pearson's Mercury in the hopes of frying the radiator of cars attempting to draft. Looked like they were 3 or 4 inches in diameter, as I recall.

User avatar
healey36
Posts: 7026
Joined: Fri Sep 03, 2010 4:43 pm
Location: Westminster, MD

Re: Car Thread

Postby healey36 » Fri Nov 27, 2020 7:08 am

Typical Wood brothers. I recall hearing a story about Bill Elliott when he was driving for them. They were prepping a car for the prerace weigh-in, and Elliott, who was hanging out in the garage, decided to pitch in and help. He rolled a tire over to help the garage crew get the wheels on, only to find he couldn't lift the tire off the floor. Everyone had a good laugh at Elliott's expense, as the tires were supposedly half-filled with sand so the car would hit the minimum weight specs.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Car Thread

Postby E7 » Fri Nov 27, 2020 12:24 pm

It would have been interesting if they had let them do "anything goes". The results might have been more Nascar drivers with wings, but it would have been highly entertaining.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Car Thread

Postby rogruth » Fri Nov 27, 2020 12:44 pm

E7 wrote:It would have been interesting if they had let them do "anything goes". The results might have been more Nascar drivers with wings, but it would have been highly entertaining.

I am not a big race/NASCAR fan but I agree.
Too many things that were real fun, or not,
are over regulated today.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
healey36
Posts: 7026
Joined: Fri Sep 03, 2010 4:43 pm
Location: Westminster, MD

Re: Car Thread

Postby healey36 » Fri Nov 27, 2020 7:15 pm

Yeah, I haven’t followed NASCAR for a long time either, Roger. The scripted format they have now, running three wide until the next wreck, just doesn’t entertain me.

I agree with Rich, the pre-restrictor plate era was a lot more fun. Less competitive, but there were a half-dozen cars every race that ran up front, and those were running likes bats out of hell. It seemed like every race was Yarborough, Pearson, the Unser brothers, and Petty up front, and those battles were epic. They ruined it when they replicated all the cars in the name of cost and safety.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Car Thread

Postby rogruth » Fri Nov 27, 2020 7:22 pm

I don't remember who drove what company but I always had a feeling it had to do with auto company rivalry.
I have no facts on this presumption. It was done to keep any company from breaking away and starting a rival group.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Car Thread

Postby E7 » Sat Nov 28, 2020 1:50 am

When Healey mentioned Yarborough, it jogged my memory. I met him in 1974 when I was attending a Telco training school in Johnson City, TN. He was in town for the Bristol 500, driving a Chevrolet Malibu sponsored by Carling beer. He stayed at the same Hotel/Motel. Friendly very casual manner. Short and stocky built like a bull. Turned out that he won that race. Only live race I ever went to was a US Grand Prix at Watkins Glen, NY.


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: No registered users and 56 guests