The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #7 Lobaugh Milwaukee Road Boxcar

Postby R.K. Maroon » Tue Feb 22, 2022 10:22 pm

Here is the underbody of the Milwaukee Road boxcar:

Image

These photos were taken of the car in the "as arrived" condition. You will note the Athearn Delrin trucks and Kadee couplers as "not original". Of more historical interest is the lack of the stamped brass frame, which is common to most Lobaugh freight cars. This boxcar was introduced in 1936 and was available until the war. It is not easy to date this car, but as the stamped frame was introduced as an option in 1938 and made standard in 1941, we can say for sure that this car dates between 1936 to 1940. The brass strip that covers the center sill is a commonly found on Lobaugh cars without the stamped frame. It is more frequently seen on express and passenger cars than on freight cars.
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #7 Lobaugh Milwaukee Road Boxcar

Postby R.K. Maroon » Thu Feb 24, 2022 11:33 pm

This is the Milwaukee Road car as it appeared in the 1937 catalog:

Image

The same photo was used in every catalog from 1936 to 1941. The car did not reappear after the war.

Note that the different prices are, from left to right, body materials only, full kit with trucks, and factory built and lettered.
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #7 Lobaugh Milwaukee Road Boxcar

Postby ScaleCraft » Thu Feb 24, 2022 11:41 pm

For YEARS I have asked about center sills with cardstock or brass plates nailed on like that......and everybody says they are just an old scratchbuilt car. I have a BUNCH like that. Now I know!
Dave....gone by invitation

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby R.K. Maroon » Fri Feb 25, 2022 11:41 pm

#8 Rail Craft MP Gondola

Here we have a Beeman's Rail Craft offset-side gondola:

Image

These are tinplate models. Rust never sleeps so these are often (usually?) found with some amount of corrosion and the associated damage to the paint. Luckily, in this case it's somewhat realistic looking, given the gondolas tend to get pretty beat up in service.

Image

Jim
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby R.K. Maroon » Sun Feb 27, 2022 10:19 pm

Note in the photos above that the paint on the panels with the decals is still intact. One might conclude that the decals provided a better moisture seal than the paint did.

I don't have a photo of the underside of this car, but here is the underside of a similar one that arrived without trucks:

Image

And here is the model as it appeared in the 1942 catalog of the Model Railroad Shop of Dunellen, New Jersey:

Image
The link below any photo will display the image full size

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby bob turner » Mon Feb 28, 2022 12:29 am

These were incredibly nice models for the time, and for the price. I managed to get three into my collection.
They are fairly flexible, so I made .032 brass floors for them, attached with four screws. Better tracking.

Railcraft made matching panel side hoppers, and they rival the early Max cars. Some were all brass.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby sarge » Mon Feb 28, 2022 6:09 am

I'd suggest it isn't corrosion at all, but poor surface preparation before painting. The evidence is in the decalling as the setting solutions are solvents, softening the paint underneath as well as the substrate of the decal to "weld" them together. The result is usually some tougher than paint alone as anyone who has grit-blasted an old paint job with aluminium oxide grit can tell you.

Having painted more than a few Railcraft cars, the prep was always a pain. I suspect the material came oiled from the supplier, common to both protect the stuff and thought to facilitate stamping, especially if the old story is true about these being produced in a school metal-shop.

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby Rufus T. Firefly » Mon Feb 28, 2022 9:27 am

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:08 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby J. S. Bach » Mon Feb 28, 2022 3:31 pm

R.K. Maroon wrote:#8 Rail Craft MP Gondola
Here we have a Beeman's Rail Craft offset-side gondola:
Image
...snip...

I have a wood version of that car lettered for T&P, possibly scratch-built however I suspect that it might be from a kit.

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby Rufus T. Firefly » Mon Feb 28, 2022 4:12 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:08 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: The Tridaily Doorstop -- #8 Rail Craft MP Gondola

Postby J. S. Bach » Mon Feb 28, 2022 4:58 pm

Thank you. Interesting to know.

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #9 Alexander NYC 4-4-0

Postby R.K. Maroon » Mon Feb 28, 2022 10:28 pm

#9 -- Alexander NYC 4-4-0

Here is a pre-war Alexander 4-4-0, nicely finished and lettered for New York Central:

Image

Image

Image

It would be nice if more old models arrived in this kind of condition, but alas, most don't.

Jim
The link below any photo will display the image full size

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #9 Alexander NYC 4-4-0

Postby bob turner » Mon Feb 28, 2022 10:51 pm

That looks like a Gerry White rework. I don't think Ed did rivets like that. Not sure I could do that good, and my rivets win prizes.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #9 Alexander NYC 4-4-0

Postby bob turner » Mon Feb 28, 2022 11:08 pm

Back to Rail Chief for a minute - I have three like Maroon's - I think they were MoPac prototypes. I have at least one hopper, one non-panel gon, and one kind-of "pipe" car - a bit like a pulpwood car.
Here is the hopper, alongside an unknown:

Image

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #9 Alexander NYC 4-4-0

Postby Rufus T. Firefly » Tue Mar 01, 2022 8:38 am

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:08 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 58 guests