The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

The Tridaily Doorstop -- #11 Walthers C&NW Fishbelly Flatcar

Postby R.K. Maroon » Sun Mar 06, 2022 11:15 pm

# 11 -- Walthers C&NW Fishbelly Flatcar

Here is a car that dates back to the mid-1930s, at time in which Bill Lenoir worked for W.K. Walthers:

Image

Image

The lumber loads were sold on eBay several years ago, hand made by somebody and priced very reasonably. I should have bought more while they were available, as I now have other C&NW flatcars and having multiple cars with the same road name and load is a look that I like.

Jim
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #11 Walthers C&NW Fishbelly Flatcar

Postby R.K. Maroon » Mon Mar 07, 2022 10:04 pm

I believe Walthers sold this flatcar for something north of 40 years. As stated above, this is a very early version of it. Most of these found have a two-piece, white-metal chassis sideframe and wood center sill. These had to be soldered together, which was very rarely done well. Those were the later version, which appeared in the late 1930s. The earliest models, by contrast, had a one-piece, cast-bronze chassis sideframe and bronze center sill:

Image

If, one day, I found an infestation of these on my roster, I would not feel inclined to call an exterminator.
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #11 Walthers C&NW Fishbelly Flatcar

Postby ScaleCraft » Mon Mar 07, 2022 11:51 pm

I've got a couple of flats with wood loads. For the life of me, cannot remember who made the cars. I'll hafta look.

Doorstop, sort of, I was rooting around in my shop attic this past weekend, found this car. I'd been wanting an SPNG tank for my #9, and shoot, had one. Mine had been oversprayed with very flat black, covered the lettering, bit of time with Q-tips and PollyS and there is was. mine does not have the third line on the sides (LT WT), but does have CAPY on ends, as this one does not.

The tank is heavy...solid (?) resin casting, neat, sharp. The framework is unknown, wood or resin shaped. Reluctant to shave parts to find out!

Has really scale couplers, as shown, and brass trucks. When I got the car I yanked the trucks, put on Delton sprung trucks with operating Delton couplers to match up here. Now I'm looking for more, or similar. Measurements, l & w of frame, shows it to be close enough to 1:22.5 stuff to call it that. NOT the proto style 1:20.3..
Fun stuff, indeed?

http://www.sidestreet.info/Usedpages/Mason.html
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #11 Walthers C&NW Fishbelly Flatcar

Postby ScaleCraft » Tue Mar 08, 2022 1:27 pm

Tracked it down to manufacturer. Weird.
Chuck Allen out of Dallas. 3 miles north of RK's place of residence.

Date reference is 31 years ago.

With a name like Chucks Custom Cars out of Dallas, you can imagine the hits for customizers, specialty builders, shopping cart customizers.....funny!

Odds are I cannot call the number shown in '91 and order some more tanks.....
Dave....gone by invitation

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #11 Walthers C&NW Fishbelly Flatcar

Postby R.K. Maroon » Tue Mar 08, 2022 8:42 pm

As mentioned, the C&NW fishbelly flatcar was offered by Walters for many decades. Here is a photo of the car from the 1939 catalog:

Image

Note the road number, 42597. CN&W flat cars with this road number were not only offered by Walthers but also by Scale-Craft and Westbrook. Woody Mathews explained this by pointing me to the Car Builder's Cyclopedia, which he knew to be a primary source for modeling information back in the day. Sure enough, I found the following photo of the prototype of this car in the 1931 edition:

Image

The complete story of the C&NW fishbelly flatcar is found in O Scale Trains, Issue #115, May-June 2021.

One last thing: I believe there was some discussion regarding "blue box" Walthers cars, which seem to date more or less to the mid-1930s, which were the "bronze era" years for Walthers. I mention this because this flatcar indeed came in a blue box:

Image

Image
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby R.K. Maroon » Thu Mar 10, 2022 12:46 am

#12 -- Scale Model Railways T&P Boxcar

Jack Ferris ran Scale Model Railways as in independent company through most of the 1930s, but he sold the company to Megow a year or two before the war. For some period of time, Megow continued to advertise the product line as Scale Model Railways models and included the tag that SMR was "a Megow Company". SMR developed a line of cast aluminum freight cars sometime around the buyout. As they appeared in the Megow catalogs that followed, the models are often referred to "Megows". I'll stick to calling them SMRs. Here is a boxcar from the line:

Image

Image

I would bet that T&P never decorated their boxcars with both "Texas and Pacific" and "T&P", as this one is. My guess is the modeler used what was on the decal sheet without giving it much thought. I may be wrong about all this, but it just doesn't look right to me.

Jim
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby ScaleCraft » Thu Mar 10, 2022 1:33 am

Dunno if I ever had one of these. Are those doors cast into the sides, one piece?
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby bob turner » Thu Mar 10, 2022 11:54 am

I have an ice car. These are absolutely stunning for what they are. I wish I had stocked up when they appeared on eBay a couple years ago.

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby Rufus T. Firefly » Thu Mar 10, 2022 12:49 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:09 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby bob turner » Thu Mar 10, 2022 1:47 pm

Sure. Left is SMR; right is unfinished All Nation

Image

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby Rufus T. Firefly » Thu Mar 10, 2022 2:09 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:10 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby J. S. Bach » Thu Mar 10, 2022 4:30 pm

Nice, Andrews trucks even.

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby R.K. Maroon » Fri Mar 11, 2022 12:35 am

Yes, the doors are cast with the sides as a single piece. Keeps the hobos out (or in).

Here is the underside:

Image

The center sill and the crossbears are a single-piece casting. The floor is wood. Note that this car was introduced in the 1930s, which I imagine was before the time of modern epoxies and Harbor Freight TIG welders. This raises the question of how one would put this car together. The answer is the cast outer pieces are pinned to an inner wood box.

Note also that one often finds these cars with the original paint and decals in surprisingly good condition. This can be explained in part by the lack of rust that comes with aluminum construction. But it conversely raises the question of how the problem of properly priming the aluminum was handled. To put this another way, I would not take for granted that 1930s-era model paint would adhere for 80 years to an aluminum model.

Finally, I don't believe those trucks are original. They look like All Nation unsprung trucks, which AN got from GMC and GMC got from Hawk. The Hawk versions actually say "Hawk" in the inside of the sideframes.

Jim
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby ScaleCraft » Fri Mar 11, 2022 1:05 am

I've had several sets of Hawks. If I recall, even the wheels were cast Zamac. I seem to remember the wheels had HAWK cast into them. I think I saved the bolsters and screws. I have not seen Zamac crumble quite like those did.
Yours look to be in reasonable shape, as the journals seem to be parallel! Paint helped keep the oxygen away, I would guess. Mine had no paint.
I'd seen the pins, somewhat hidden in the corners and in the middle. Don't need a dozen per side to keep thin sides flat, that's fer sure!

Aluminum does corrode, but there are probably varying mixes and purity. I have spots I had to fix on SC cast where even after glass bead, prime and paint, you get a spot.
Dave....gone by invitation

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #12 Scale Model Railways T&P Boxcar

Postby R.K. Maroon » Sat Mar 12, 2022 12:31 am

Here is a listing for the SMR cast boxcars, as found in the 1940 Megow catalog. Eight different road names, including T&P, are offered, and six are shown. Sadly, T&P is not one of them, so we don't know how SMR intended the car to look:

Image

Note, at the bottom of the page, that these cars are called out as a product of Scale Model Railroads (instead of Railways). These kind of errors just sneak by anytime something goes to print.

Dave pointed out that the T&P under the Texas and Pacific lettering is simply the reporting mark to go with the road number directly underneath it. That is a good point, obvious in retrospect. However, as we all know, the reporting mark and road number are usually found in much smaller type than any billboard information on the car and are often set off with lines above and below. Again, I have no proof that the T&P never had a car so lettered, but it just looks odd to me.

Jim
The link below any photo will display the image full size


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 40 guests