The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby sarge » Tue Mar 22, 2022 6:41 am

R.K. Maroon wrote:It seems to me that the merits of the Lionel 716 scale hopper have been elbowed out of the conversation here so we can all beat up on the Lionel crowd in general (it's been done to death, so no fun for me in that) and the 714 boxcar in particular.


Jim, I was not beating up on the Lionel crowd at all, and will attempt to present the perspective objectively.

It appears discussion of the merits of any of the models you've posted have often wandered off to general comments regarding the entire range it might have come from, to prototype fidelity, and to comparisons regarding the model in question versus its contemporary competition. I submit its fair game here, not unfair "beating up" of any "crowd".

History as a discipline calls into question past interpretation of events (in this case represented by artefacts) for examination or re-examination. There is often proposed a revised interpretation and, in order for that interpretation to gain any validity, events, facts, artefacts, are examined and presented in support. Otherwise, the clinging on to old interpretations by repetition, emotion, &c results, or new unsupported ideas quickly transcend revisionism to conspiracy theory, either pole rejecting analysis for myth.

As far as the 700 series, much has been written in the most exalted terms. To be fair, you laid the range out for discussion when you posted the hopper. Of the range, the hopper is arguably the best model, a representation of the prototype. Not a Pennsy guy, but the B6 might be next in line for fidelity. It all goes pretty much downhill from there as to what is a good model or not.

Earlier, we discussed the merits of the Alexander tank, its prototype, the origin of it as published in the contemporary Carbuilder's, the use of Carbuilders, Locobuilders, and other prototype engineering sources by manufacturers in that era to give us prototype specific models, et al. Its fair. While some like the appearance, proportions, finish, of the 700 series tank as an artefact onto itself, I've never found a prototype although yes many have been used in the scale sector as admittedly very good looking albeit generic filler. In my day, the same was done (barring brass) using the Kusan Auburn tank, likewise without specific prototype but of good proportion and potential, until the advent of the Intermountan and RC kits.

The boxcar in the range has already been discussed, and I'm hesitant to bring up the caboose or the Hudson at this point. I would not be surprised if every item in the range is indeed an attempt at a specific prototype, but I'll need some education regarding the tank and the box as to whether that's true. If it is so, then they really cannot be called equivalent to their contemporaries let alone top-of-the-line simply because they are not successful at recalling their prototype in the same manner as others of the era (the Alexander tank example).

None of this was or is intended as "beating up" on a "crowd". This then brings a question regarding intent of the thread. Is this intended as an objective discussion of the merits of these examples as models and artefacts of our history, or as a celebration of doorstop-dom? If the latter, I respect that and, once knowing that to be the intent, will stay out of it for I'm not really a celebrant in that mould. They interest me as artefacts representing an often misunderstood era worthy of discussion in context, or as models onto themselves, successful or no. Beyond that, I've no interest in them as icons (icon compared to artefact; there is a significant difference) or as items of nostalgia, so should probably not be here unintentionally damping the celebration (or inspiring others to intentionally do so) by bringing interpretation into it when celebration is the intent.

My apologies to all.

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby R.K. Maroon » Tue Mar 22, 2022 12:38 pm

Your points are fair and all well taken, Brian. My intent was to steer the conversation back to the 716 hopper. I clearly should have chosen my words more carefully, and for that I am sorry.

Here is my other 716 example. This one still sports the original, uncut couplers:

Image

Image

I generally don't chase such models, as their value as a collectible to others far exceeds their value as an operating model to me, and I am wary of operating cars with these Talgo couplers with other O-scale models. As it was, this one came to me as part of John Fisher's 700-set recreation, and to my surprise, the car operated flawlessly. There is a thread with video on John's 700 set (which is mostly comprised of converted semi-scale models with body-mounted Kadee couplers):

http://www.modeltrainjournal.com/phpBB3/viewtopic.php?f=10&t=19383
The link below any photo will display the image full size

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby E7 » Tue Mar 22, 2022 3:20 pm

Let us not forget that it is all opinion, and one man's meat is another man's poison, and beauty is in the eye of the beholder. That said, the argument for eyeglasses could pop up! :lol: :lol: :lol:

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby E7 » Tue Mar 22, 2022 3:29 pm

R.K. Maroon wrote: There is a thread with video on John's 700 set (which is mostly comprised of converted semi-scale models


Jim, I will take exception with one thing: semi-scale???

It's either scale or it's not! That might be the most totally meaningless description in the hobby!

Semi-Grumpy,
Rich :mrgreen:

PS: I kinda like the hopper.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Tue Mar 22, 2022 11:32 pm

It is indeed all opinion. I need to go back and put "opinion" after all of my posts, especially those where I express opinions.

Here are a couple facts - no, I cannot cite a source, but I bet somewhere I have a Lionel catalog . . .

1. Prewar Lionel called the tinplate-trucked versions of the 700 freight cars and maybe the 763E Hudson "semi-scale." They are entitled to their own definitions, even if we think they are gramatically incorrect.

2. Lately, Lionel decided that shrinking a model down in size would be known as "semi-scale." Maybe we could find analogies - semi trailer? Semifinal?

Websters says semi = exactly half. In architecture, it is a vertical slice. And often it is used to mean "approaching" as in maybe "approaching scale?"

But we are stuck with Lionel's description, which is ambiguous unless you address what models you are labelling. Go with the flow, but be careful.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby ScaleCraft » Wed Mar 23, 2022 12:30 am

yeah...and the tinplate trucked versions were box couplers, if I recall, At least fully interchangeable with earlier latch couplers. Electric knuckles came in 46, armatures in 49 or so.
Never heard it broken down like that before. Not that it's wrong. Scale, semi-scale, HiRail, and tinplate.
I mean, Talgo with scale knuckles? Come on. But, they were playing to a market.

My stuff is semi-scale and hirail. Close as you can get within confines of 1:52.

Some wag, 70+ years ago, got his hands on every piece of Lionel he could find, measured, compared and logged, then averaged.
And published.

Average scale of Lionel was between 1:52 and 1:53. Close, but no stogie.
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby ScaleCraft » Wed Mar 23, 2022 2:02 am

This is what they look like with tinplate pre-war trucks and box couplers:
https://image.invaluable.com/housePhoto ... 561685.jpg
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby ScaleCraft » Wed Mar 23, 2022 2:13 am

I'll have to think about this photo:
https://image.invaluable.com/housePhoto ... 514867.jpg

There are no frames or truck frame bolsters. I know how these go together (you can see the parting line of the two car body halves along the bottom of both), and I know how fragile they can be. What did they do, leave the frames off and cut a hole for truck kingpins along the parting line?

Strange.
Dave....gone by invitation

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby E7 » Wed Mar 23, 2022 10:30 am

bob turner wrote:but I bet somewhere I have a Lionel catalog


When I was about 10, I got the 1957 catalog. "Pulp Fiction"! I think there might be a movie there! :lol: :lol: I think that was the introduction of Super-O, which looked way better to me than the old tubular stuff. There were also Illinois Central F units??? I liked those colors! I didn't learn until years later that IC only had E's. I was crushed. :lol: :lol: :lol:

bob turner wrote:Websters says semi = exactly half.


Kinda says Half O to me!

I used to get Railroad Model Craftsman back then, and I wondered: Who in the heck were Max Gray and Ken Kidder? About 14 years old the Lionel went back in the box never to emerge. 1 to 1 Hot cars took over until years later. Never did get that Ferrari Daytona.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Wed Mar 23, 2022 3:11 pm

So Maroon has the right idea - an entry every three days and let us fill in the interstices. To that end, the 717 cabeese - I note (fact, not opinion) that Maroon's photos are a good bit better than mine, so in a day or so you may see better photos of the 717 - hopefully - all wheels on the track and no giant fingerprint.

But let me add that as a young person the NYC caboose ranked right on up there with the PRR T1 and S2 as models I would never, ever own. Ever! Now I have a soft spot for all three!

Image

Lionel 717, repainted in a non-authentic color, lettered by Leroy, and heat-straightened with wood roofwalk. Still, one of my favorites, if not a true valuable classic.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Wed Mar 23, 2022 3:14 pm

Here is the Williams brass repro version - those are genuine Lionel trucks, found at a swapmeet for five bucks. There are differences, but all in all, Williams did a pretty good job. MTH tried and missed by a nautical mile! No photo available - the MTH cars were in here and out of here before the shutter had time to click!

Image

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby Rufus T. Firefly » Wed Mar 23, 2022 3:24 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:11 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby ScaleCraft » Wed Mar 23, 2022 5:11 pm

Now if you REALLY need one of these 4-bays, you can order from Lionel for a new die-cast:

https://www.amazon.com/Lionel-51501-Bal ... B01MSI7590

Postwar compatible knuckles if you do 3-rail, or yank the trucks, stick scale trucks under it and your choice of coupler.
A WHOLE lot cheaper and probably better shape than dealing with 85-year-old collectibles.
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Thu Mar 24, 2022 2:18 pm

Better is the K-Line. It is almost a direct copy, in die cast, and some nice guy in New York made castings to convert the ends to scale trucks and appearance, exactly as Lionel had done to adapt the 700 sprung trucks to their prewar casting. I bet I have ten K-Lines converted around here, and only two Lionel - except for the paint and lettering (and trucks/couplers), you cannot tell. $25-35 on the used market.

User avatar
Rufus T. Firefly
Posts: 42237
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby Rufus T. Firefly » Thu Mar 24, 2022 3:31 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:11 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 39 guests