The Tridaily Doorstop -- Bob's Mexicano Electric
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper
Apparently Stout has stout pricing...19% buyer's premium? Makes those about $96 plus applicable taxes AND packaging and shipping.
Oh, and I read up on 717 castings. Jury seems to be out, from one person claiming a magnesium alloy to everybody else a zinc alloy.
Funny what folks worry about. Saw one thread where a guy was worrying about proper whirly wheels.....showed photos of two he owned.....the one without had body held to floor with Phillips head.....and they hadn't introduced Phillips Head to Lionel then. Up through Dec 41 slotted on everything I have. Then there's the guy claiming "original" 717 with fogged acetate glazing....errr.....no.
Folks take the re-issue versions and pawn them off as pre-war. Suppose that counts if you don't specify WHICH war.
Oh, and I read up on 717 castings. Jury seems to be out, from one person claiming a magnesium alloy to everybody else a zinc alloy.
Funny what folks worry about. Saw one thread where a guy was worrying about proper whirly wheels.....showed photos of two he owned.....the one without had body held to floor with Phillips head.....and they hadn't introduced Phillips Head to Lionel then. Up through Dec 41 slotted on everything I have. Then there's the guy claiming "original" 717 with fogged acetate glazing....errr.....no.
Folks take the re-issue versions and pawn them off as pre-war. Suppose that counts if you don't specify WHICH war.
Dave....gone by invitation
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper
Well, here is a prewar Lobaugh caboose. You know I am a Lobaugh freak, but I regard this one as inferior in almost all ways to any other caboose in this thread. "I regard" = opinion.

- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper
you could always tell when a friction journal was dry as the wheel was rusty. if properly lubricated, ran out onto the wheel face and was dark.
You need to oil them!
Not a bad car, especially if you need a SP unit.
Interesting brake wheels. Two stacks? Musta been for the snowsheds in winter?
You need to oil them!
Not a bad car, especially if you need a SP unit.
Interesting brake wheels. Two stacks? Musta been for the snowsheds in winter?
Dave....gone by invitation
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
#15 -- Scale Model Railways NYC Caboose
The NYC low-cupola, wood caboose was offered by many manufacturer's before the war (and since). One of the less common models was that offered by Scale Model Railways:


I can't speak to prototype fidelity, but this one is well built and in good condition, which makes it easy to like for me.
Jim
The NYC low-cupola, wood caboose was offered by many manufacturer's before the war (and since). One of the less common models was that offered by Scale Model Railways:


I can't speak to prototype fidelity, but this one is well built and in good condition, which makes it easy to like for me.
Jim
The link below any photo will display the image full size
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
Like the prototype series of this car A LOT. Only for comparison sake, I did a dip-off salvage on this Lionel version I posted here about 14 months ago, with apologies to James, here's a photo-bomb of it. We know... all know....crude, but it sold for a good price. I kept a plastic version Lionel 1990's re-issue of this hack that is perfect for my AHM NYC C-Liner freight train, as this example wound up being way too heavy.
.
Ironically have another example of one of these in-process in the tank as I type this.
I would certainly like having this SMR version too, as I know would at least two members of the downtown club would who are also avid NYC fans.
Maroon, can you give us a description of the car body charactersitic of your SMR, material break down as in sides, underbody, casting etc.
The trucks are very cool too, I wish they were easier to find, the protruding leaf spring on the side frame is perfect for this kind of car.
Ironically have another example of one of these in-process in the tank as I type this.
I would certainly like having this SMR version too, as I know would at least two members of the downtown club would who are also avid NYC fans.
Maroon, can you give us a description of the car body charactersitic of your SMR, material break down as in sides, underbody, casting etc.
The trucks are very cool too, I wish they were easier to find, the protruding leaf spring on the side frame is perfect for this kind of car.
Last edited by De Bruin on Fri Mar 25, 2022 11:33 pm, edited 2 times in total.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
R.K. Maroon wrote:#15 -- Scale Model Railways NYC Caboose
The NYC low-cupola, wood caboose was offered by many manufacturer's before the war (and since). One of the less common models was that offered by Scale Model Railways:
I can't speak to prototype fidelity, but this one is well built and in good condition, which makes it easy to like for me.
Jim
I like that. Even the running boards have some meat to them, unlike thin brass strips which if 1:1 would buckle.
Dave....gone by invitation
- Rufus T. Firefly
- Posts: 42237
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:12 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
The ones under Pete's 707? They look to me like Lobaugh. Bob Stevenson may have a master for a far more delicate version, and could probably cast you a set or two. Let me look for a casting that Dennis sent years ago - it was too delicate for me, but the detail was exquisite.
Put me down for an SMR NYC caboose - that thing has charm. I was simply not aware of how nice the SMR models were, for their time. I bet some window frames would make it even better, but those wide windows look pretty good as-is.
Put me down for an SMR NYC caboose - that thing has charm. I was simply not aware of how nice the SMR models were, for their time. I bet some window frames would make it even better, but those wide windows look pretty good as-is.
- Rufus T. Firefly
- Posts: 42237
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:12 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
Been doing some digging on 717's and variants.
Interesting, not only the variations but the stuff being sold as "original" with what looks like Athearn trucks.
http://www.dakotapaul.com/pics1/P8100128.jpg
http://www.dakotapaul.com/pics1/P8100129.jpg
Note Talgo couplers and center rail pickup mounted in pocket in frame.
http://www.dakotapaul.com/pics/PC282009-01.jpg
This is the tinplate, 2957 version. Note NO center rail pickup pocket in frame/floor!
http://www.dakotapaul.com/pics1/PC2700594.jpg
Note spear shank body mounts (and I have seen these). No talgo shanks.
But, and here we get really strange. I don't think those are even Lionel trucks. A) no pins through sideframe for spring retention, B) the bolster looks like Athearn, C) they're sprung, not dummy leaf spring as original, and) kingpin screw looks like a standard non-Lionel 2-56 or possibly 4-40.
I did e-mail him and ask.
Interesting, not only the variations but the stuff being sold as "original" with what looks like Athearn trucks.
http://www.dakotapaul.com/pics1/P8100128.jpg
http://www.dakotapaul.com/pics1/P8100129.jpg
Note Talgo couplers and center rail pickup mounted in pocket in frame.
http://www.dakotapaul.com/pics/PC282009-01.jpg
This is the tinplate, 2957 version. Note NO center rail pickup pocket in frame/floor!
http://www.dakotapaul.com/pics1/PC2700594.jpg
Note spear shank body mounts (and I have seen these). No talgo shanks.
But, and here we get really strange. I don't think those are even Lionel trucks. A) no pins through sideframe for spring retention, B) the bolster looks like Athearn, C) they're sprung, not dummy leaf spring as original, and) kingpin screw looks like a standard non-Lionel 2-56 or possibly 4-40.
I did e-mail him and ask.
Dave....gone by invitation
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
Some of it isn't strange. The Lionel arch bars were used on the 701 tender with that separate coupler. My caboose came with the 701 trucks and separate couplers, but I captured a pair of Talgo trucks.
Yes, the fourth photo looks like somebody put 2-rail Athearns on. Don't forget - the Lionel 700-series was 3-rail, and in the olden days folks pitched the uninsulated Lionel trucks and added Athearn.
Yes, the fourth photo looks like somebody put 2-rail Athearns on. Don't forget - the Lionel 700-series was 3-rail, and in the olden days folks pitched the uninsulated Lionel trucks and added Athearn.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
bob turner wrote:Some of it isn't strange. The Lionel arch bars were used on the 701 tender with that separate coupler. My caboose came with the 701 trucks and separate couplers, but I captured a pair of Talgo trucks.
Yes, the fourth photo looks like somebody put 2-rail Athearns on. Don't forget - the Lionel 700-series was 3-rail, and in the olden days folks pitched the uninsulated Lionel trucks and added Athearn.
True dat...except the scale versions had different floor/frames. I have read you could order three ways, scale body mounts, scale talgo mounts, and tinplate.
Never with Athearn trucks, however. Of course, not sold as "originals" either in that configuration.
Someplace I read body mounts automatically came in sets with Hudsons, Talgos automatically with the B-6 (expected use on curve diameter, I think).
I was just pointing out the differences from the factory.
Add to that the clowns who try to pawn off 90's re-issue Lionel as 30's vintage. Condition....you don't often end up with a dead pristine, no wear, fade or chips, with clean wheels and no box on a 30's vintage. Happens, just not often, if you have it out of the box on a shelf for 60 years then sell it.
Go read it again. Didn't claim Lionel trucks were wrong, just the Athearn. Something else...do you have a photo of a tank with talgos? Every tank I've seen had body mounts.
With talogs, the swing in the v-shaped coupler "pocket" is very limited for tighter curves.
Dave....gone by invitation
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
Yes - the SHELL above has, and came with in 1960, Talgos. My two other 715 tanks have trucks with nipped off coupler arms.
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
De Bruin wrote:Maroon, can you give us a description of the car body characteristics of your SMR, material break down as in sides, underbody, casting etc.
As is often the case with any model, the underside is the tell of the SMR caboose:

That is a cast aluminum frame. There are other cabooses with cast frames (Alexander, Walthers, All Nation, others?), but the open coupler pocket is unique, as far as I know. The rest of the caboose is wood, as best I remember. The next time I go to the shop I will inspect and report back.
De Bruin wrote:The trucks are very cool too, I wish they were easier to find, the protruding leaf spring on the side frame is perfect for this kind of car.
The trucks are KTM. In my experience, these are usually equipped with brass wheelsets. That used to be a no-go for me but I have found that a quick blast in the media cabinet to shine them up followed by a coat of Neo-Lube produces a good looking wheelset.
"AJK" are the initials for Al Kamm. There are three generations of model railroaders in the Kamm family. The 1937 date suggests that this is the mark of the oldest of the three. I have several of his models, and they are all very nice pieces.
Jim
The link below any photo will display the image full size
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop -- #15 Scale Model Railways NYC Caboose
ScaleCraft...cast frame, integral open coupler pockets, brass crossbar, right?
I see the yellow paint for single insulated wheels and keeping everything pointed right to prevent shorts. I use white.
Solid looking caboose, that. VERY well preserved for 85 years old.
I czeched, SC open box, brass bar
I see the yellow paint for single insulated wheels and keeping everything pointed right to prevent shorts. I use white.
Solid looking caboose, that. VERY well preserved for 85 years old.
I czeched, SC open box, brass bar
Dave....gone by invitation
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 46 guests
