Got wood?

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: Got wood?

Postby robert. » Fri Aug 05, 2022 8:06 pm

My computer wont play nice and post an image.
I spend entirely too many hours a day tying my shoes

User avatar
healey36
Posts: 7026
Joined: Fri Sep 03, 2010 4:43 pm
Location: Westminster, MD

Re: Got wood?

Postby healey36 » Sat Aug 06, 2022 8:51 am

I’ve no idea on the location, but Robert’s research seems a reasonable approximation. I was thinking Denmark; it has a Nordic look to me.

gregj410
Posts: 2641
Joined: Tue Aug 30, 2011 8:19 pm
Location: Maryland

Re: Got wood?

Postby gregj410 » Sat Aug 06, 2022 7:43 pm

Once again my buddy Larry showed up with a pile of cypress. He says, what do you have going on? So you know how this went. :lol:

He gets these state jobs and apparently one of the old bath houses at one of the beaches needed the rails to be replaced. not glamorous work by any extent, but a nice change from flooring, so I obliged.

I basically made a template off the original. Roughed them out on the bandsaw. Flush trimmed them out of the pattern. Then ran them through the shaper.

Image

Image

Image

Image

https://youtu.be/exdds94tvXQ

Image

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: Got wood?

Postby HONDO74 » Sun Aug 07, 2022 9:20 am

Looks like the spindle sander was put to good use for the contour. Are you going to paint them also.....

gregj410
Posts: 2641
Joined: Tue Aug 30, 2011 8:19 pm
Location: Maryland

Re: Got wood?

Postby gregj410 » Sun Aug 07, 2022 9:23 am

HONDO74 wrote:Looks like the spindle sander was put to good use for the contour. Are you going to paint them also.....



I would but he’s going to let his son sand and paint them. I’m sure his sons rates are cheaper than mine :lol:

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Got wood?

Postby Rufus T. Firefly » Sun Aug 07, 2022 9:43 am

Here's a question for you - I need a replacement handle for my 8" dovetailing saw. Any ideas on where to get one?

Specifics: it looks like these 2 examples and one of these is got a bit broken off it as well, but mine is far worse.

Image

Image

And, I'd rather keep it in use - it's a nice 15 tooth saw that despite being 150 years old is still quite useful and would be more so if I can get a proper handle for it.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: Got wood?

Postby robert. » Sun Aug 07, 2022 10:46 am

I have replaced a few horns. Plane it flat, glue a piece of apple on and shape.
filing a saw some good info here http://www.badaxetoolworks.com
making a handle https://sawmillcreek.org/showthread.php ... Saw-Build..
You can tighten up the handle on split nut saws. A little bit of filing on the split nut. If your handle has shrunk a bit. The nut will bottom out on the saw plate. There is loads of info out there about good repairs. I can't locate any of my old sites. Disston institute might have some good info. Those fine tooth backsaws are fun to file and set. A good tuned saw will cut wood in a snap
I spend entirely too many hours a day tying my shoes

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Got wood?

Postby Rufus T. Firefly » Sun Aug 07, 2022 11:07 am

robert. wrote:I have replaced a few horns. Plane it flat, glue a piece of apple on and shape.


Mine has the entire bottom loop broken and missing. And the 8" saw handle appears to be somewhat unique with only 2 mounting bolts; longer saws seem to all have 3 or more.

What I have now works, but it's a little too delicate given what I've had to do to repair the remaining parts of the handle. No issues on it being solid on the blade.

If I could find some good clear aged apple ~3/4" thick, I'd be thinking to just make an entirely new handle. Can use what I have combined with the handle on the 10" I have to make a template. Got a line on some apple wood?

Disston institute might have some good info.


Did and that's how I dated it and my 10" saw.

A good tuned saw will cut wood in a snap


Yes, and why I'd like to get this one a handle that will permit me use it more frequently.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

gregj410
Posts: 2641
Joined: Tue Aug 30, 2011 8:19 pm
Location: Maryland

Re: Got wood?

Postby gregj410 » Sun Aug 07, 2022 11:38 am

Not sure this would meet your need and at 85$ your half way to a brand new one. Wish I could help you but most of my saws have cords on them :mrgreen:

Probably a situation where enough internet research will turn up something. Good luck!

Image

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Got wood?

Postby Rufus T. Firefly » Sun Aug 07, 2022 11:47 am

gregj410 wrote:Not sure this would meet your need and at 85$ your half way to a brand new one. Wish I could help you but most of my saws have cords on them


Thanks; sort of close and might work; mine should have a close loop on the handle but a solid handle would be an improvement. Yup - a bit pricey....

Most of my stuff has cords as well, but a subset do not and those that I have kept justify their residence by getting put to work now and again. Probably should sell off a trunk load of 100+ year old human powered tools; using them less and less.

Probably a situation where enough internet research will turn up something. Good luck!


Been finding info on the saw itself, and how to make a handle, but not a source of a replacement handle. Figure I'll find a perfect one on a beat saw at a farm auction about a week after I get done making a replacement - the universe has a way of functioning like that....
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
robert.
Posts: 6010
Joined: Mon Mar 02, 2015 9:24 am

Re: Got wood?

Postby robert. » Sun Aug 07, 2022 2:29 pm

I spend entirely too many hours a day tying my shoes

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Got wood?

Postby Rufus T. Firefly » Sun Aug 07, 2022 3:39 pm

robert. wrote:http://www.blackburntools.com/articles/saw-handle-templates/index.html
template


Thanks!

One of the closed handle fishtail patterns might work - none though are the two bolts type. I'll have to play about with this a bit to see it I can scale it to something close. Next up is whether I can clean split some apple with the frow next week.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Got wood?

Postby Rufus T. Firefly » Wed Aug 10, 2022 10:35 am

Image

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: Got wood?

Postby HONDO74 » Wed Aug 10, 2022 10:39 am

Looks like it is all made out of metal.....

User avatar
Rufus T. Firefly
Posts: 42239
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Got wood?

Postby Rufus T. Firefly » Wed Aug 10, 2022 10:47 am

HONDO74 wrote:Looks like it is all made out of metal.....


Yes, but it's a lovely inventive craftmanship product bit that model builders might appreciate.....
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: No registered users and 52 guests