Early Piggyback Project 1953-1957 1/4 Scale

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
Chris Webster
Posts: 956
Joined: Mon May 25, 2015 8:25 pm

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Chris Webster » Wed Feb 18, 2026 2:47 pm

Pacific Limited wrote:The following I have researched this is a conclusive list in 1/43-1/48-1/50 of 1940's-1950's era tractor trailers of what you are looking for. Revelll, Lionel, Weaver, and Berkshire Valley all roduce trailers in stand alone and as kits.
Your list is awesome!
1/48 Revell Mack Mobile Gas Fruehauf tank truck. Still around cheaply as it was remade in the 1990's.

Atlantis Models has reissued this tank truck kit, but now it comes with Sinclair and US Army decals:
1:48 Vintage White-Fruehauf Gasoline Truck - Sinclair Dino Gasoline

Atlantis also reissued the 1955 Chevy Stake Truck that I think was also a Revell kit:
1:48 1955 Chevrolet 2 Ton Stake Truck

Atlantis also tooled new sprues of "glass" windows that the original Revell kits did not have. The reissued Stake truck comes with the window sprue, but I'm not sure about the tank truck - they tooled the windows for that kit after they reissued it. Atlantis sells these window sprues separately in case anyone still has unfinished Revell kits:
Clear Windshield Glass Set for the STAKE Truck
Clear Windshield Glass Set for the Vintage Gas Truck

They also have 8" Howitzer Gun and M4 Sherman Tank kits that might make good flatcar loads, although the Tamiya Sherman is probably better detailed than the Atlantis kit.

Pacific Limited
Posts: 706
Joined: Sat Jan 22, 2011 10:46 pm
Contact:

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Pacific Limited » Mon Mar 02, 2026 3:52 pm

Thanks Chris !

Pacific Limited
Posts: 706
Joined: Sat Jan 22, 2011 10:46 pm
Contact:

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Pacific Limited » Sat Oct 10, 2026 11:07 am

Small update

Getting another F39B finished up. Last of the chain-up and jack stand era 1956-57 with a half roll-back “ragtop” common carrier single axel trailer and “new” Fruehauf stainless van in Denver’s National carrier Ringsby. That’s a 1955 Bekins Revell kit I bought off eBay and refinished. Isn’t 1/48 fun? Ah to be in HO where what, 2-4 manufacturers are chasing you with ready to play models, life is short but getting there is most of the fun. Where is the fun in playing with someone else’s modeling?



ImageO scale P48 and 2 Rail recent work 10/26 by Erik C Lindgren Fine Art, on Flickr

ImageO scale P48 and 2 Rail recent work 10/26 by Erik C Lindgren Fine Art, on Flickr

ImageO scale P48 and 2 Rail recent work 10/26 by Erik C Lindgren Fine Art, on Flickr

Chris Webster
Posts: 956
Joined: Mon May 25, 2015 8:25 pm

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Chris Webster » Sat Oct 10, 2026 12:25 pm

Gorgeous modeling Erik!

Pacific Limited wrote:Ah to be in HO where what, 2-4 manufacturers are chasing you with ready to play models, life is short but getting there is most of the fun.
HO became frustrating for me - I'd a buy a new state-of-the art model and then just a few years (or months) later another manufacturer would release an even more state-of-the art model of the same prototype. Doh!

Where is the fun in playing with someone else’s modeling?
I realize you're referring to the hobbyists who run factory stock models on snap together track, but I thought I would mention that I do get a lot of enjoyment from O-scale equipment built by other modelers. I enjoy looking at your work and the models others post here. I've also been fortunate to purchase (rescue, actually) some beautifully custom built models from estate sellers who didn't know what they were selling because it wasn't Lionel or American Flyer in factory boxes. :D

Pacific Limited
Posts: 706
Joined: Sat Jan 22, 2011 10:46 pm
Contact:

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Pacific Limited » Sat Oct 10, 2026 11:42 pm

Part of the reason I like 1/48 is I can do most all the detail that is interesting to me. HO Is handy and practical but it’s too small and too large if that makes sense. Just enough to make you wish it was all there like those cast cut-levers on these new “high end plastic” models. They just end, and they are in scale enormously out of size, but yes present but just plain wrong. I’d rather leave them off if I were an HO scaler. Just because more flock to a thing it doesn’t make it better. It just means more are really happy with less or simulation over practice.

Track work is big for me, and why I am in termoil over P48 and O5W. I have so many models in O5W and many would be impossible for me to convert so I do both in a strange dance of collecting and some saved out for operation and others for display and enjoyment of “all” the detail. When I show P48 models to guys in smaller scales they ask me if it’s S scale or something else. It’s kind of funny. These same guys think a Lionel 6464 series boxcar is full 1/48 scale. :roll:

I like a lot of scales and have Z, N, TT, O, and 1. I love 1:120, it’s like HO only not too big. But nothing exists in US prototype the meet my authenticity ADHD issues. RoKal is cool, but really post war Lionel in 1:120. Züeke BTTB is all DRG, Soviet, and eastern block stuff but astonishing for 1960s. Going 1:45 with my Hermann stuff in Swiss I find it unbearably large, no difference than 1:32 or 1 scale.

Pacific Limited
Posts: 706
Joined: Sat Jan 22, 2011 10:46 pm
Contact:

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Pacific Limited » Sun Oct 11, 2026 12:01 am

Some more snapshots of progress on this F39B -Ex Pennsylvania retaining its original PRR TrucTrain car number but relettered for use on TTX per FRA rules around interstate law. There is a boat load of laws in those days that made truckers and railroad career men crazy. Lots of regulation.

Image1/4 scale F39B TTX by Erik C Lindgren Fine Art, on Flickr

Duff Norton Jack stands and chains with turn buckle threaded hooks. Tool boxes in the center sills contained the door bars and other hardware and chain. Door bars were used to prevent the side doors common on these trailers in the 40s-50s from opening fully. My models are weathered lightly and not rolling junk yards, i represent the car as it would have looked in 1956. The trailers for me are just as much fun as the rail cars. A roll back half open 30’ trailer single axel in a very classic 1950s Hennis private carrier, cool!

Image1/4 scale F39B TTX by Erik C Lindgren Fine Art, on Flickr

The pneumatic tired vehicle rule in the FRA manual in 1955 states all tires must be not in contact with the decking. That slowed down things. I am sure the industry couldn’t wait for those rules to be abolished and they did very soon after this car was placed in service. By 1957 fifth wheel stands were the new rage, wheel chocks and away they went. I think modeling this old chain up process is a challenge and part of the reason I do 1/48.

Image1/4 scale F39B TTX by Erik C Lindgren Fine Art, on Flickr
Last edited by Pacific Limited on Sun Oct 11, 2026 12:45 am, edited 2 times in total.

Pacific Limited
Posts: 706
Joined: Sat Jan 22, 2011 10:46 pm
Contact:

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby Pacific Limited » Sun Oct 11, 2026 12:18 am

A bit of review, I finished this car in its original condition in Tuscan red as it ran on the demonstration PRR train in 1955. The fine gentleman that made my decals is an absolute expert of these cars and was very helpful on colors and detail. You can see his research here: https://www.mountvernonshops.com/produc ... car-decals

https://jbritton.pennsyrr.com/index.php ... trailers-2

https://youtu.be/TBLscsFZYIw?si=8ugUwiekAbKBJAhL

ImagePRR F39 in original condition 1955 by Erik C Lindgren Fine Art, on Flickr

Ragtop common carrier all strapped up and mounted headed to New York from Chicago. And a home road aging PRR 26' Single-Axle Rib-Side Van Trailer - by Fruehauf, I had to include a PRR trailer. I wanted to do one of the 1954 PRR 32E250-32R257 Series - 32' Tandem Axle Trailer - by Fruehauf but would need to either 3D print or fully scratch one. Maybe when I get more time. For now this Lionel 26’ is perfectly done in 1/48.

Yellow paint is on all of the removable components used. I really should have painted the door bars yellow as well, however that can proven both ways with photos of them running in consist. And those groovy signs that PRR put on a dozen or so cars as fanfare didn’t last long and were quickly mixed about and from what is said were gone by the end of 1956. Still I think they are cool and worth the effort to scratch build them in place with that cool TrucTrain Pennsy design on them. I did not weather this car and it’s on P48 trucks, I will get some dust and road grime added soon, it is a little bright. But in early 1956 these cars were they delight of the marketing department at PRR and they appear in photos being pretty clean especially being only 6-10 months old.

ImagePRR F39 in original condition 1955 by Erik C Lindgren Fine Art, on Flickr

Mounting process was identical to the F39B, and all trailer loading methods used up to that point.

sleepmac
Posts: 658
Joined: Sun Nov 22, 2015 4:10 pm

Re: Early Piggyback Project 1953-1957 1/4 Scale

Postby sleepmac » Sun Oct 11, 2026 2:53 pm

Erik, I appreciate the research you did to become so knowledgeable about the piggyback trailers and related history.

Dan Weinhold


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 58 guests