Hobo Jungle
AG wrote:Hi Wayne
The capacitor are necessaries for short voltage interruptions.
A.
Andre,
Correcto usted es.
Jon,
Andre is correct. Capacitors will prevent the lamps from flickering when rail contact is lost due to dirty rails. I would try 10 uF, 35 V caps. If the lights still flicker, go larger. maybe 100 uF, 35 V on the first cap.
----Wayne----
Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard
Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard
Dirt......................man that's a good idea with the balloons....................
Maybe we could rig something like that and balloon Jon's *** up here to Pennsy....................
Looks like the Rosie The Guard Dog is on duty checkin' out the turtle................
hev
Maybe we could rig something like that and balloon Jon's *** up here to Pennsy....................
Looks like the Rosie The Guard Dog is on duty checkin' out the turtle................
hev
If you want to find history, follow the train man..................

Had to take the Fire Safety Trailer out today and set it up with the with the National Guard today for the kids. Man...................was it hot and humid 94 at 10:00 this morning. Unreal........................
Here are a few Pictures................................
Here is what you need Jon...................................
hev
Here are a few Pictures................................
Here is what you need Jon...................................
hev
If you want to find history, follow the train man..................

RC Time Constant
Earlier today I took a wild guess at what value of capacitor would be required for the voltage regulator. Now that I am off work, I can spend some time with the math for RC time constants.
RC TIME CONSTANT
The time required to discharge a capacitor to 37 percent of its initial voltage is known as the Time Constant of the circuit.
Running conventional mode you will be using 10 to 18 Volts or 14.4 to 25 Volts Peak (voltage available to charge capacitor.) 37% of 14.4 VDC is 5.3 VDC. Not quite enough for the voltage regulator but don't forget the capacitor on the output of the regulator will help keep the lamp lit. Thirty seven percent of 25 VDC is 9.25 Volts. More than enough.
One form of the formula used in calculating RC time constants is:
t(in microseconds)=R(in ohms) X C(in microfarads)
The lamp shown in the picture (see the link I gave above) draws .025 amps at 6 Volts so the resistance is R=V/I=6/0.025=240ohms. At 5 volts the resistance is a little less but 240 ohms is close enough for estimating the capacitance required. Plugging 240 ohms into the TC formula for various values of capacitance:
0.1uf: t=RC=240x0.1=2.4 us
1uf: t=RC=240x1=240 us
10uf: t=RC=240x10=2400us=2.4 sec
100uf: t=RC=240x100=24,000us=24 sec
How many microseconds do we need? You cannot see a lamp flashing at 60 Hz (17 us) or 30 Hz (33 us). You can see a 15 Hz (67 us) flicker. So 1 uf should work, giving enough voltage to keep the lamp lit during a 240 us glitch in power. Two lamps... 120 us. Three lamps... 80 us.
Happy birthday Mike.
RC TIME CONSTANT
The time required to discharge a capacitor to 37 percent of its initial voltage is known as the Time Constant of the circuit.
Running conventional mode you will be using 10 to 18 Volts or 14.4 to 25 Volts Peak (voltage available to charge capacitor.) 37% of 14.4 VDC is 5.3 VDC. Not quite enough for the voltage regulator but don't forget the capacitor on the output of the regulator will help keep the lamp lit. Thirty seven percent of 25 VDC is 9.25 Volts. More than enough.
One form of the formula used in calculating RC time constants is:
t(in microseconds)=R(in ohms) X C(in microfarads)
The lamp shown in the picture (see the link I gave above) draws .025 amps at 6 Volts so the resistance is R=V/I=6/0.025=240ohms. At 5 volts the resistance is a little less but 240 ohms is close enough for estimating the capacitance required. Plugging 240 ohms into the TC formula for various values of capacitance:
0.1uf: t=RC=240x0.1=2.4 us
1uf: t=RC=240x1=240 us
10uf: t=RC=240x10=2400us=2.4 sec
100uf: t=RC=240x100=24,000us=24 sec
How many microseconds do we need? You cannot see a lamp flashing at 60 Hz (17 us) or 30 Hz (33 us). You can see a 15 Hz (67 us) flicker. So 1 uf should work, giving enough voltage to keep the lamp lit during a 240 us glitch in power. Two lamps... 120 us. Three lamps... 80 us.
Happy birthday Mike.
----Wayne----
Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard
Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard
-
zeke-a-nator
Hev, If that Humvee is anything like the ones we use- I could'nt afford to keep it on the road!!!!
Wayne, I'll be using 3 of these lamps in the tender in parallel on one circuit and 4 of the same in the engine on another circuit for those marker lights. Will I use the same cap as what your recommending for a 6 volt light?
1.5V 1.2MM Diameter, 15mA
Also, Will a 1.0 uf work instead of a 0.1 uf?
Wayne, I'll be using 3 of these lamps in the tender in parallel on one circuit and 4 of the same in the engine on another circuit for those marker lights. Will I use the same cap as what your recommending for a 6 volt light?
Also, Will a 1.0 uf work instead of a 0.1 uf?
Running that red block Charlie.
highrailjon wrote:Hev, If that Humvee is anything like the ones we use- I could'nt afford to keep it on the road!!!!![]()
Wayne, I'll be using 3 of these lamps in the tender in parallel on one circuit and 4 of the same in the engine on another circuit for those marker lights. Will I use the same cap as what your recommending for a 6 volt light?1.5V 1.2MM Diameter, 15mA
Also, Will a 1.0 uf work instead of a 0.1 uf?
You must to use 4 lamps 1.5 x 4= 6 volts if you use less you will increase voltage on the rest and reduce the life of them.
A.
highrailjon wrote:Andre, how about the 1.0 instead of the 0.1 caps?
depend how much room you have too.
you can use 4000 uf if you want, but is huge. 100 uf for your lamp will work ok at low speed over the swtiches.
Andre.
Last edited by AG on Wed Jul 11, 2007 9:22 am, edited 1 time in total.
Detective Will Rothfuss was in his office studying the light from his one small window falling on his super burrito when the door swung open to reveal a woman whose body said you've had your last burrito for a while, whose face said angels did exist, and whose eyes said she could make you dig your own grave and lick the shovel clean.
Return to “The Club Car Lounge”
Who is online
Users browsing this forum: No registered users and 56 guests

