For your evaluation

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: For your evaluation

Postby bob turner » Sun May 14, 2017 10:13 pm

This all seems really, really complicated. I build my own DC power packs using Variacs, step-downs, bridge rectifiers, and giant capacitors.

But the OP wants ripple-free DC, which sounds like a battery and a giant resistor. Or a really, really good filter. Oscilloscopes will show a ripple on almost anything that starts out with AC.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: For your evaluation

Postby ScaleCraft » Sun May 14, 2017 10:26 pm

My Marn-0-Stats had a switch....big transformers and selenium disc rectumfriers one way, lead acid batteries the other.
You can't really fix a Tech III easily due to the SCR switching. On older units, like a 501, yes.


BEEP 68, ETA 69, Sub School and SINS school 70, fleet 71-74, with various ETC schools along the way.

I still have an EIMB, full volume, big as an old dictionary.
Dave....gone by invitation

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: For your evaluation

Postby De Bruin » Sun May 14, 2017 11:28 pm

RDSRR wrote:What I don't understand is if this fancy card can handle DCC which is says......why would not the board have a DC to DC converter to take care of that issue... have a real hard time thinking all his customers are reinventing a power supply.


But Dan, it's so much more fun to do it this way.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

Tom Dempsey
Posts: 1002
Joined: Mon Dec 23, 2013 10:15 pm

Re: For your evaluation

Postby Tom Dempsey » Mon May 15, 2017 12:32 am

RDSRR wrote:What I don't understand is if this fancy card can handle DCC which is says it can he has an AC/DC converter on board. Since most all power packs these days have pulse or whatever they call it, why would not the board have a DC to DC converter to take care of that issue... if it is a real issue. Just what exactly does this manufacture recommend people use with his product? If it's as popular as he says I have a real hard time thinking all his customers are reinventing a power supply.


Well Dan, that's why I always start a relationship by purchasing the product at retail, and trying it out. I don't sell what I don't use, or can't recommend, or can't support. That question has occurred to me also, but, I haven't quite got to asking him that. Of course, the dead rail option completely bypasses that issue, however, there are boucou MRC powerpacks out there and I don't really know what he's using for himself as of yet.

Tom Dempsey
Posts: 1002
Joined: Mon Dec 23, 2013 10:15 pm

Re: For your evaluation

Postby Tom Dempsey » Mon May 15, 2017 12:39 am

bob turner wrote:This all seems really, really complicated. I build my own DC power packs using Variacs, step-downs, bridge rectifiers, and giant capacitors.

But the OP wants ripple-free DC, which sounds like a battery and a giant resistor. Or a really, really good filter. Oscilloscopes will show a ripple on almost anything that starts out with AC.


The problem for me Bob is that while I studied that stuff in school in the mid 70's, by the time I was actively working with electronics the first card in the rack was a A to D converter and then everything was digital. I really have problems with non solid state electronics/anything that are pre-eighties as my experience factor just ain't there. Working on the EMD stuff later on was pretty much follow the circuit and find where the power stopped.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: For your evaluation

Postby ScaleCraft » Mon May 15, 2017 2:38 am

Tom Dempsey wrote:
bob turner wrote:This all seems really, really complicated. I build my own DC power packs using Variacs, step-downs, bridge rectifiers, and giant capacitors.

But the OP wants ripple-free DC, which sounds like a battery and a giant resistor. Or a really, really good filter. Oscilloscopes will show a ripple on almost anything that starts out with AC.


The problem for me Bob is that while I studied that stuff in school in the mid 70's, by the time I was actively working with electronics the first card in the rack was a A to D converter and then everything was digital. I really have problems with non solid state electronics/anything that are pre-eighties as my experience factor just ain't there. Working on the EMD stuff later on was pretty much follow the circuit and find where the power stopped.


Yeah. I hit that weird spot...trained on vacuum tubes (valves), then transitioned into transistors....never did much into chips. Navy used a lot of older design stuff..some to be more EMP resistant, methinks.
SINS..old style with a binnacle, gyros, PIPAs, early computers, servos....SPS-6 radar was vacuum tube...but I've done radio/battery for 25 years out doors, even made a good living at it.

Battery is the best source for pure, unadulterated DC..big charger to keep it up. But if you want grunt, a 15A Bridgeworks will, in fact, do the job, and leave you some headroom. Most have a slider stop, but be advised, with little load they can peak high on voltage, and fry an older sound card with no motors across the load.

I've had lots of old MRC's open, no caps, usually the bridge rectumfrier is blown (one I have a guy used to run his 0 2 rail Big Boy continuously..501? H0 pack....gave it to me, bigger bridge, hasn't failed me in 25 years now.
Stay away from the units with a wiper across the secondaries. They will fail if you use them up and down, up and down, for a long time. If you are building an old transistorized tethered throttle (lite a TAT IV?) just crank them all the way up and tape across the knob.
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: For your evaluation

Postby bob turner » Mon May 15, 2017 2:54 am

Tom: I am no great shakes at either analog or digital, but if you want a good power pack with reasonably ripple free output, make the following mod to your diagram:

On the input, put a small circuit breaker, and then a small variac. Feed your stepdown with the variac output.

Just past the bridge rectifier, get rid of the transistors, and install a capacitor the size of a frozen orange juice can across the output. Then go through your ammeter, connect your voltmeter across the output, wire in the DPDT switch, install a 5 amp breaker, and you are done - a pretty package, a "power on" red light, and banana plug outlets for both AC and DC are really nice but not essential.

Not as pure as a battery, but not bad.

User avatar
Roy
Posts: 7849
Joined: Mon Aug 09, 2010 8:48 pm
Location: Lakewood, CA

Re: For your evaluation

Postby Roy » Mon May 15, 2017 4:21 am

Tom Dempsey wrote:Every Power Pack I have seems to be a pulsed unit (most are MRC or starter set packs) and they are "messing" with the board I am currently trying to install in a locomotive. What I want is up to 6 amps of straight DC, no ripple, no pulse, a straight line on an oscilloscope at 12 volts. Your evaluation would be gratefully accepted, brutality is allowed/encouraged (if necessary). Thanks, as always, Tom Dempsey

Another approach is to fix the onboard electronics so that they'll work with standard power supplies. What is this board you're using?
Torturers, White Racists, Gay Bashers, Rich Psychopaths.

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: For your evaluation

Postby Seaboard Air Line Fan » Mon May 15, 2017 5:40 am

Here's my "transformer":

battery.jpg
battery.jpg (56.43 KiB) Viewed 6580 times


And my wiring diagram:

RX65B WIRING DIAGRAM.jpg
RX65B WIRING DIAGRAM.jpg (813.76 KiB) Viewed 6580 times


Also need a Transmitter:

TX-3a.jpg
TX-3a.jpg (41.89 KiB) Viewed 6580 times


The BIK-U3 is an On/Off switch with polyfuses and the charging jack, you'll also need a charger:

DSCN0734_555.JPG
DSCN0734_555.JPG (243.58 KiB) Viewed 6580 times


No wires to the layout, the entire track is a dead spot :lol:

No sound though, yet, and no smoke.

Good for 3 or 6 amps depending on what you buy.

I've been running for over 2 years now with ZERO failures, I get 2-1/2 hours of run time on a charge.

For those that already have a system this may be looked at as a waste of $$$, but starting from scratch it is definitely worth a look.

Here's where I get my Rx now:

http://rctrains.co.uk/

More on the RX65b:

http://rctrains.co.uk/Rx65b.htm

Took less than a week last order.
BobD aka Drifty

The Crow Flies At Midnight

sleepmac
Posts: 658
Joined: Sun Nov 22, 2015 4:10 pm

Re: For your evaluation

Postby sleepmac » Mon May 15, 2017 11:42 am

Bob, thank you for the schematic and parts URLs. I'm tentatively taking the step you have done. I have one R/C Battery powered loco with sound. I might go that route again, but the cost was pretty steep from that installer. Still I only have 3 more diesels to do and maybe one steamer.

Dan Weinhold

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: For your evaluation

Postby ScaleCraft » Mon May 15, 2017 12:17 pm

All of my R/C gear is RCS....going back 25 years. Pushbutton 27MC Elsema-based stuff, works just like it should. I wanted to use Walsham's new 2.4GC stuff, but cannot do a knob. Outdoors, rain and snow...we put the transmitters in ziplock baggies, can't operate knobs in baggies, so I used RCS America for later stuff.
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42243
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: For your evaluation

Postby Rufus T. Firefly » Mon May 15, 2017 12:22 pm

ScaleCraft wrote:snow...we put the transmitters in ziplock baggies, can't operate knobs in baggies...


Put the entire person in a baggie with the controller, :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: For your evaluation

Postby ScaleCraft » Mon May 15, 2017 12:38 pm

Rufus T. Firefly wrote:
ScaleCraft wrote:snow...we put the transmitters in ziplock baggies, can't operate knobs in baggies...


Put the entire person in a baggie with the controller, :wink:

Kewl. Now, since 90+ of the switches out doors are manual ground throws, and the couplers are all manual pin lifts....how do you do that when ensconced in a body bag(gie)?
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42243
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: For your evaluation

Postby Rufus T. Firefly » Mon May 15, 2017 12:41 pm

ScaleCraft wrote:
Rufus T. Firefly wrote:
ScaleCraft wrote:snow...we put the transmitters in ziplock baggies, can't operate knobs in baggies...


Put the entire person in a baggie with the controller, :wink:


Kewl. Now, since 90+ of the switches out doors are manual ground throws, and the couplers are all manual pin lifts....how do you do that when ensconced in a body bag(gie)?


Cut a slit in one side for 1 hand.....like a poncho.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: For your evaluation

Postby ScaleCraft » Mon May 15, 2017 12:44 pm

InTheEarlyPouringRain.jpg
InTheEarlyPouringRain.jpg (157.89 KiB) Viewed 6544 times
Starting to rain.
DSCN2706.JPG
DSCN2706.JPG (441.34 KiB) Viewed 6544 times
Getting heavier (and note the TX Baggie)
BruceRainResize.jpg
BruceRainResize.jpg (101.47 KiB) Viewed 6544 times
Really coming down...and dark...note TX in Baggie at end of turntable.
Dave....gone by invitation


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 46 guests