Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
All --
I just sold a CLW kit for the PRR H-10 2-8-0 on eBay. I inventoried all the parts to verify that it was complete, but I failed to inventory the instructions. (There was a good amount of paper in each box so I just assumed all the instructions were there). As it is, the kit is missing the locomotive and tender assembly drawings, numbers 1140 and 1180. Please contact me by PM or email if you have a set that you can spare or copy (or send to me and I will copy and return). My email address is jdebruin at sbcglobal dot net.
Thanks
Jim
I just sold a CLW kit for the PRR H-10 2-8-0 on eBay. I inventoried all the parts to verify that it was complete, but I failed to inventory the instructions. (There was a good amount of paper in each box so I just assumed all the instructions were there). As it is, the kit is missing the locomotive and tender assembly drawings, numbers 1140 and 1180. Please contact me by PM or email if you have a set that you can spare or copy (or send to me and I will copy and return). My email address is jdebruin at sbcglobal dot net.
Thanks
Jim
The link below any photo will display the image full size
-
Carey Williams
- Posts: 690
- Joined: Sat Dec 24, 2016 3:10 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Hello Jim
sorry I do not have a set of instructions .....how ever you could point the new owner to Model Railroading 1954 ..Bob Klubertanz did a 5 + part series articles about putting together a CLW 2-8-0 part 4 is in April 1954 .
Cheers Carey
sorry I do not have a set of instructions .....how ever you could point the new owner to Model Railroading 1954 ..Bob Klubertanz did a 5 + part series articles about putting together a CLW 2-8-0 part 4 is in April 1954 .
Cheers Carey
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
What a maroon!
I wonder if Steve Neill can help.
Steve?
Jay
I wonder if Steve Neill can help.
Steve?
Jay
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
I will look. The H-10 was my first O Scale steam kit, and I did follow the instructions. If I can find them they are yours.
Since then I have found instructions mostly boring and useless. I regard the Lobaugh instructions as not worth the read, and shudder at ever going through an inventory.
Since then I have found instructions mostly boring and useless. I regard the Lobaugh instructions as not worth the read, and shudder at ever going through an inventory.
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Jim...check your email. I sent you several files worth of the instructions for that kit. Hopefully it will include all you need. Let me know.
Robert
Robert
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
What a Maroon indeed! Jay, I have heard that Steve has an impressive library of documentation, so I will not be surprised if he has these plans.
Robert, I did receive the files you sent and have forwarded them to the buyer. Thank you very much for that.
Thanks to Carey for the tip on the Model Railroader article. I have the digital archives and can print PDFs. I will see if the buyer is interested.
Bob -- Please do let me know if you have the original plans. Do you still have the H-10? I have wondered just how much Bob Smith changed the Saginaw when he put out this kit.

Jim
Robert, I did receive the files you sent and have forwarded them to the buyer. Thank you very much for that.
Thanks to Carey for the tip on the Model Railroader article. I have the digital archives and can print PDFs. I will see if the buyer is interested.
Bob -- Please do let me know if you have the original plans. Do you still have the H-10? I have wondered just how much Bob Smith changed the Saginaw when he put out this kit.

Jim
The link below any photo will display the image full size
-
stephen neill
- Posts: 151
- Joined: Thu Jun 23, 2016 6:16 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Jim - I will look. I don't have one of the kits, but I may have the instructions.
Steve
Steve
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Off the hook. My filing system sucks!
We may have done this fine model before, but I am all for posting photos in conjunction with Maroon's request. I think there were three versions - two by ClW and of course the original by Saginaw/Lenore.
We may have done this fine model before, but I am all for posting photos in conjunction with Maroon's request. I think there were three versions - two by ClW and of course the original by Saginaw/Lenore.
-
stephen neill
- Posts: 151
- Joined: Thu Jun 23, 2016 6:16 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
I looked, and I don't have them I will ask others who may have them.
Steve
Steve
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Which version of the H-10 kit do you have, iron drivers, lost wax brass drivers or cast epoxy center drivers? The epoxy driver kits were the last produced and require installation of spring loaded pickup wipers on the loco frame that contact the driver tires
Joe
Joe
Joe Foehrkolb
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
I am almost certain I have the instructions - buried. I shall search soon.
I did not know Smith made lost wax brass drivers for the H10, although I have a set from the PS-4, and they are gorgeous. The glass-filled plastic drivers are adequate, but if you need to do something, like add a NWSL gearbox, it gets involved.
Not sure how many photos I have, but here is a start. Yes, I have my original, plus a Saginaw, plus another CLW, plus fragments, plus one converted to an Atlantic, plus - plus -
I did not know Smith made lost wax brass drivers for the H10, although I have a set from the PS-4, and they are gorgeous. The glass-filled plastic drivers are adequate, but if you need to do something, like add a NWSL gearbox, it gets involved.
Not sure how many photos I have, but here is a start. Yes, I have my original, plus a Saginaw, plus another CLW, plus fragments, plus one converted to an Atlantic, plus - plus -
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Well, that is a Saginaw. I have no photos of the others, but this is the H10 converted to an Atlantic - scratch tender, Saginaw frame modified for sprung drivers, Lobaugh drivers. Happy!
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Found the envelope. Contains H10, Northern, lots of CLW ads and literature. Want it all, or just the H10?
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
bob turner wrote:I did not know Smith made lost wax brass drivers for the H10
The H10 Kit I bought from Joe F. had brass drivers...and yes they are real nice.
Robert
- R.K. Maroon
- Posts: 3140
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation
Much to respond to here:
Joe -- To answer your question regarding the drivers, the kit I sold has resin drivers with steel tires. They were already painted when this kit arrived, so I don't know what they looked liked bare. As you might expect, the spokes and hubs are clean -- no casting voids, etc.
Bob -- Thanks for posting the photos of the Saginaw and other variants. The Long Island markings are cool. Did this one come to you that way or is that your work? I am not much of a PRR modeler but if I stumbled on a nice Saginaw at a show table for a reasonable price it would probably have to come home with me.
Robert -- It looks like the center drivers are blind on your set. Am I seeing that right? I don't know when those lost-wax brass drivers were offered but I'm a little surprised that they would have come blind. Did you consider negotiating with Joe to have flanges added, or does the lack thereof support your layout operations?
Bob -- I sent you an email on the documentation. I would indeed like to have it all for the library -- or at least long enough to scan it in.
Thanks to all for the posts and responses,
Jim
Joe -- To answer your question regarding the drivers, the kit I sold has resin drivers with steel tires. They were already painted when this kit arrived, so I don't know what they looked liked bare. As you might expect, the spokes and hubs are clean -- no casting voids, etc.
Bob -- Thanks for posting the photos of the Saginaw and other variants. The Long Island markings are cool. Did this one come to you that way or is that your work? I am not much of a PRR modeler but if I stumbled on a nice Saginaw at a show table for a reasonable price it would probably have to come home with me.
Robert -- It looks like the center drivers are blind on your set. Am I seeing that right? I don't know when those lost-wax brass drivers were offered but I'm a little surprised that they would have come blind. Did you consider negotiating with Joe to have flanges added, or does the lack thereof support your layout operations?
Bob -- I sent you an email on the documentation. I would indeed like to have it all for the library -- or at least long enough to scan it in.
Thanks to all for the posts and responses,
Jim
The link below any photo will display the image full size
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 69 guests